Share your CCNA Wireless Experience

I have failed the wireless test once and need CBnuggets and question please?

@r
Do you remember some questions?

@John
For #41, I think it would be Active the way it’s worded. The question mentions infrastructure, so I’m assuming they are referring to the wired LAN portion and will want to test data rates and not just coverage. The question needs to be clarified, really.

@John
#49, RRM’s default setting is 600 seconds (10 minutes). It is found and set in Wireless, 802.11a/n/ac (or 802.11b/g/n), DCA. You can also see the setting, but not change it, in TPC.

@Claud
Rogue detection does not service clients because the radios are off. Bridge, Local, and FlexConnect would be your answers.

@FOX

Thank you very much. :)

For #41:
The answer is “p.r.e.d.i.c. t.i.v.e”
Just wondering why I can’t post that word directly. Seems there is a filtering.

@Foxx,
Out of topic:
I know you are the master of wireless here, I just want to ask if you know any active forum for 300-360 aside from wireless tut? I am planning to take that exam soon. TIA

What are two security threats to wireless networks? (Choose two.)
A. Ad-hoc networks
B. Client misassociation
C. Port redirection
D. Cross-site scripting

Dump says A and B, but I don’t understand why Ad-Hoc Networks is marked as correct answer here.

Does anyone have a link to a newer dump?

Hi all

I have tried to read all the comments and feedbacks from Nov and going through some links posted here,but the I can’t find all Dumps all or complete…

You guys talking about 411& 438 but still can’t get the links to those,can anyone send me the links to the dumps….
Thanks in advance

Congrats!!!

Passed 200-355 test on 8/July/2017!!

Scored 9xx/1000!!!

Learned almost all questions from that PassLeader 459q 200-355 dumps: http://www.ciscobraindump.com/?s=200-355 (THE NEWEST VERSION!!!!!!)

Good Luck!!!

@John
For your post #46. The right answer would be B. pay attention it is A İNİTİAL deployment. Even if you primed some controllers but AP did not join them already, AP tries to join master controller that is the secondary controller in this case.

Please, help with this question:

How much cell overlap for 2.4GHz?
A 5%
B 10%
C 15%
D 20%

C or D? I think is D for 2.4GHz and C for 5GHz, right?

Thanks,

Good day, @John you asked a very good question let me see if I can answer that for you. The reason A and B are the best possible answers go hand in hand. Ad-hoc networks can be dangerous because they open the devices in question to different types of attacks. There are minimal security measures put in place with ad-hoc and people can connect to the “network” and access root device.

Misassociation is a concern because the device thinks its connecting to a particular SSID but it really is connecting to something else. Lets use a hospital scenario since its what I’m familiar with. If I was a malicious attacker I could create an ad-hoc network with the same SSID name (or very similiar change upper to lower case) as the guest network, if you were to attach and not pay any attention you could open your network communications to me without even knowing.

Hope this helps

@trackB here you go straight from Cisco:

The optimal VoWLAN network requires overlaps of 20 percent (2.4 GHz), and approximately 15 to 20 percent (5 GHz), where a WLAN Data design may use an AP cell overlap of 5 to 10 percent.

Link to PassLeader 437 questions. Enjoy. Make sure to check every question, and make sure you study the material. Cisco is adding 10 questions a month to each exam.
https://mega.nz/#!RJk22SjS!3BxOjFCmG0mGMWN-G9h9L3VKU0WDGGMWgaGMPgBX2NU

Question- Is the answer sheet is up to 52 question only? this is for the 200-355?

When do the questions change at the beginning of the month? I have to do the exam this Friday

Passed using dumps from below page:
Its really all in one package that you need to pass exam easily.
Download here:

https://docs.google.com/document/d/13YzgDpEpdYUcCa4c3rB–c1J4vJ-3LXFCvql-b3SBDU/pub

Hi WifI Guy, your link is inactive, pls can you forward to chimezihebs at yahoo dot com

Hi guys,

What do you think about this question:

Which three items are allowed on an Ethernet trunk port? (Choose three.)
A. autonomous AP
B. FlexConnect AP
C. local AP
D. monitor AP
E. rogue detector AP
F. sniffer AP
G. SE-Connect AP
H. Cisco WLC

Dumps say:ABE but I think: ABH. I don’t see why The rogue detector AP should be in trunk.
Opinions pls

@CI – file sent, good luck.

Hello @CI , please could send the file to mail rjaen gmail com ?

Hello @CI please send file to mail swig2424 at gmail dot com

If you need the file 437Q post email and I will get it to you. Lets work together to pass this one.

swig2424 @ gmail .com

@KMS – sent

Hi Wi-Fi guy, can you please send me the file?

{email not allowed}

patrickdean803 @ gmail . com

@dean – File sent.

@Wifi Guy,

Thanks bro, got it. If you need anything please don’t hesitate to ask I try my best to help out also.

Did you already take the exam? is there any changes?

@dean please send me rjaen76 @ gmail com

Hi guys,

Can anyone share with me latest dumps or any valid dumps please? My exam is next week.

r n z z a i n @ y a h o o . c o m

Thank you and appreciate your support.

Wouldn’t it be much easier to just upload them mega/ drop box/ pastebin. literally anywhere rather than just keep sending e-mails?

Thanks Wi-Fi guy, got it.

Sitting for my exam in Tuesday.

Prep is in final stage anyone with me?

@Raticulin sent

@CI Thank you so much

@CI Thank you so much

Can anyone verify this question;

An AP using version 7.0 MR1 broadcasts a Layer 3 CAPWAP discovery message on the local IP
subnet. Which step does the AP take next?
A. Determine if the controller responses include the primary controller.
B. Determine if the controller responses include the master controller.
C. Send a discovery request using DHCP option 43.
D. Send a discovery request using DNS.
E. Send a discovery request using locally stored information on the AP.
F. Send a discovery request using OTAP.

Dumps say answer is E

@CI
E is correct. The order is: layer 3 broadcast, locally stored (primed), DHCP option 43, DNS. Layer 2 broadcasts and OTAP are deprecated.

Thabks Foxx, yeah E is correct,

Any ideas on this one:

A customer has completed the installation of an 802.11ac greenfield deployment at their corporate headquarters. They would like to leverage 802.11ac enhanced speeds on the trusted employee WLAN. In order to configure the employee WLAN, what Layer 2 security policies are valid

A. WPA2(TKIP)
B. WPA(AES)
C. OPEN
D. WEP
Ans: C

Please why is the answer C

Any ideas on this question?

Which AP to Wireless LAN Controller discovery process requires a previous association of the AP with a Cisco WLC:

A. AP Priming
B. Defining a master controller
C. DHCP Option 6
D. DHCP Option 43
E. over-the-air-provisioning

The dumps answer says A but I think it should be E.

please any suggestions

I’d appreciate all comments guys..

Here’s another one;

Which three items are allowed on an Ethernet trunk port:
a. Autonomous AP
B. Flexconnect AP
C. local AP
D. Monitor AP
E. Rogue Detector AP
F. Sniffer AP
G. SE-Connect AP
H. Cisco WLC

From my understanding all of A,B,E and H can be placed on a trunk port, however we are to choose three.
The dumps say ABE I would have preferred BEH cause we can decide to operate the autonomous AP in single VLAN mode.
Any thoughts ??

For the 802.11 ac question I think I understand why the answer is C, The WPA2 (TKIP) would cause slower data rates, while the WPA(AES) and WEP are becoming legacy with security and throughput drawbacks.

Open would be the best option here

Hi WIFI guy,
can you please send the updated dumbs to pjsanjay7594 @ gmail.com

Hi, please can you send 437q to g.u.p.2.7.0.r.@.s.h.i.t.m.a.i.l.o.r.g ?

I went to the exam and failed 848/1000. I will try to post the questions that I think I failed (I took note of that) on the following posts.

Thank you.

@Le_Barto@ccna studeny – 437Q file sent

Sorry about that Le_Barto,

My exam is for this morning,

What is the passing score?

Please share your experience

@Wi-Fi-Guy can you send it to me too, please ?
b o r e d . p e t e r d [AT] g m a i l . c o m
Thank you

@bored – file sent

Passed with 9xx/1000

No WCS, No Labs, No questions on Anyconnect

Alot of questions are reworded, one new question on which AP data modes support …. I chose local and flexconnect, I remember getting the LobbyAdmin question and one question where you were to choose 2 instead of 3.

Thanks for all the feedback from page 51 till 64.