Share your CCNA Wireless Experience

Thanks @guardian.
Anwers to your questions;
1) The one with Microsoft machine that is not authenticating and is trying to authenticate to a service engine. I answered with improper group policy configuration.

2) I mean I just read evertything in this forum from page 50 up to the latest and that helps a lot

Goodluck guardian, I know you will make it too.

@guardian

Thanks, that makes sense reading deeper into it through other sources.

Hello,
Can you also please send me the last dumps to: j v d b i e s t @ h o t m a I l . c o m ? (please remove spaces).
My exam will be very soon guys
Cheers and greatly appreciated !

@Joe:
You can read back somewhere between page 50 to 60. 411q and IMM were already share by somebody back there. I just got my copy too from that pages.

@Crismson: Thanks, I have it, but there is no update ? I can’t find the Q429 version…

I dont have that q429 too. No available dump that is 100% valid but you can use q411 and IMM as your basis, then start from there to understand the questions.

I did it. 930/1000. Almost all question from 437Q + IMM. Thanks everyone who share their valuable thoughts in the discussions. Special thanks to tintin,Foxx, Dan and Crimson.
Some question are new but they are quite simple.
As far as I remember one of new question is
Which AP modes accept client connections? (Chosse three)
A.Local,
B. Monitor
C. Flexconnect
D. Roque Detector
E. Sniffer
F.Bridge
The answer is A,C and F

@crimson
What is your opinion to study on 300-360? Is there any certification guide or study book on this?

@guardian
Congrats dear!!
Can you please confirm whether WCS, DD, Lab & CPI questions were there in the exam??
I am going to sit tomorrow for exam..

no WCS, DD and LAB questions

@guardian:
Im actually planning to take 300-360 in 2 or 3 months but don’t know where to start. Lets start discussing that at the below thread and make the thread active again. Maybe we gain more feedback from the other test takers.

http://wirelesstut.com/cuwss-642-732/share-your-cuwss-experience-2/comment-page-13#comment-482256

Hi to all.
someone can be send me the vce file with correct questions?
Thanks,
and good luck to all for the exam.

Hi to all.
someone can be send me the vce file with correct questions?
Thanks,
and good luck to all for the exam.
{email not allowed}

Good Morning,

someone can be send me the vce file with correct questions?
Thanks,
and good luck to all for the exam.

{email not allowed}

Hello,
Can you also please send me the last dumps to: huyihihuyihi @ gmail. c o m ? (please remove spaces).

Cheers and greatly appreciated !

Hi to all.
someone can be send me the vce file with correct questions?
Thanks,
and good luck to all for the exam.
t . d e n u b i l o o @ g m a i l . c o m

Hi Guys,

but the question:

Interface GigabitEthernet 1/0/10

switchport

switchport trunk encapsulation dot1q

switchport trunk allowed vlan 1,20,30,50

switchport trunk native vlan 20

switchport mode trunk

Which controller CLI command assigns its management interface to the native VLAN interface of the Cisco Catalyst switch?

A config interface vlan management 30
B config interface vlan management 50
c config interface vlan management 1
D config interface vlan management 0
E config interface vlan management 20

The VCE file mark correct D but i think E because the native vlan is 20, right?

I would say that E is the answer

@Daniele

It is D.

“config interface vlan management {vlan-id | 0}
Note Enter 0 for an untagged VLAN or a non-zero value for a tagged VLAN.”

In the switch configuration, the native VLAN is set to 20. Untagged frames will be put into VLAN 20, so you would use 0 to disable tagging.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/5-2/configuration/guide/Controller52CG/c52mint.html

@Foxx

Perfect! Thanks Foxx

What are the answers to below questions? Could someone please help.

Q1. What is max power for an AP for all regulatory bodies ?
Q2. What command can be used on the WLC to show the logs (or something) for an AP with the name
Q3. What is the command used to debug an AP that is not able to join the WLC ?:
Q4. What is required from the deployment when using voice or video applications, choose 3
Q5.What are the sources of interference you will find when conducting a site survery before

deployment(Something like that)?

1-Bluetooth Headset

2-Microwave Ovens

3-Analog Wireless Camera

4-AdHoc Wireless Camera

5-AdHoc Hotspot

Q6.what are reqs for VoWLAN:

A) RSSI -67

B) SNR 25

C) 20% overlapping cells
Q7. what is max level in Cisco WLC TPC for all regulatory domain

After testing, it has been determined that 2mW of power will be lost in the cable. An EIRP producing 200mW is desired. What should the transmit power be
set to?

I know the answer is 3.16 mW, but how is the operation without calculator to know that 5db is 3.16mW

Thanks for the help.

Hello,
Can anyone known how a WLC from a company, with Aps, configured with rogue detection (rogue containement) will reacte with another WLC from another company configured with the same technics in proximity ? (sorry bad english…)

Congrats!

Passed 200-355 exam today!

Scored 9xx/1000!

The Passleader 200-355 dumps (459q) are still valid now!

Good Luck!

Passleader 200-355 dumps FYI:

http://www.ciscobraindump.com/?s=200-355

@Luis
Here’s hoping we get the exact question; otherwise, you’ll have to guesstimate:

0dB = 1mW
3dB = 2mW
6dB = 4mW

So for 5dB, you’d look for an answer between 2 and 4mW in the available answers, closer to the 4mW end. In that question, only 3.16mW that fits that from the list.

Hi Sycor GmbH ,
can you sand me the vce?
t . d e n u b i l o o @g m a i l . c o m
I would be very grateful to you.
Thanks.

Hello everyone,
One of my colleagues did the exam today and says that some questions are different, it has passed for very little.
The file has been taken from here, does anyone know it?
http://www.tlmda.org/200-355.html

passed using prem dev dumps

Passed my 300-360 using PremDev dumps, got it from Facebook account.

What is prem Dev?

@Tom, just bought 3 days ago and passed today…… its a facebok profile you can try looking at it.

Someone have the premdev dump and can share it here? or its just false profiles to influence the people to buy that dumps?

@Avinash
Ok,
Thanks

@Avinash

can you share the premdev dumps?

Which three items do you need to establish a wireless connection to an enterprise wireless network? (Choose three.)

A.SSID name

B.RF channel

C.RF signal

D.802.1X/EAP credentials

E.pre-shared key

F.web page

G.WPA/WPA2 settings

for me the correct answers are a.SSID Name , d.802.1x/EAP credentials and g. WPA/WPA2 Settings but the dumps says that is a,c,d. Why? does not make sense

A customer is using the access point GUI to upgrade the software on an autonomous access point to convert it to a lightweight access point. Which two transfer protocols are valid for conducting this transfer from the WLC? (Choose two.)

A. FTP
B. RCP
C. SFTP
D. HTTP
E. SCP
F. TFTP

the answers are D,F. Why http?

@Luis

#35
There are probably not going to be any changes to the WPA/WPA2 settings these days. The only change might be to enable TKIP for some oddball client, but that would be very rare.

#36
On an autonomous AP, the only transfer methods available are HTTP and TFTP.

Test.

Is there a character limit on the comments section?

Hi guys, I’m planning to take the exam next week and I’m kind of nervous.

Which.wifi.survy.u.do.consdring.the.infrastructure.in.te.bildng?A-Pasive,B-Active,C-Planning

The.person.who.posted.this.pages.back.choose.C-Planning.but.I.think.is.A-Pasive.any.thoughts?

Hello everyone,
A colleague has just made the examination and among the few questions he remembers he passed this on which he was very uncertain, maybe some of you know the answer:
Client wants to implement an Enterprise WLAN solution with the minimum hardware deployed onsite. What is the correct solution?
-converged
-centralized
-FLEXCONNECT
-Cloud
-autonomous

What do you think is the right one?
He responded autonomously but was not convinced.

@Tom

The answer is Cloud.

Are you sure?
Thanks for the answer :)

After the initial deployment at a customer site, the master controller mode function was left enabled on the secondary controller after access points were primed and statically configured with primary, secondary, and tertiary controller failover. The guest anchor controller was also deployed in the architecture. The access points reboot after a power failure. Which controller will the access points associate to when the reboot process is completed?
A. Primary Controller
B. Secondary Controller
C. Tertiary Controller
D. Guest Anchor Controller

The dump says the answer is B. Secondary, but imo the correct one is A. Primary

@John
Yes, it should be the primary controller, A. The master controller function is for APs that do not already have a controller associated. The questions specifically stated that they APs were primed.

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/69561-wlc-faq.html

Thanks Foxx, it makes sense.

Any thoughts on post #41?

After installing a Cisco 5508 Wireless Controller using the default settings, how often will the RRM update occur?
A. 30 seconds
B. 60 seconds
C. 300 seconds
D. 600 seconds
E. 3600 seconds
F. 7200 seconds

Dump says correct answer is “D. 600 seconds”, but as far as I know the RRM code 7.6 updates every 60 Seconds and new RRM code 8.3 updates every 180 Seconds. What am I missing here?

Hello everyone,
question:
Which three access point modes are service clients?
A sniffer
B rogue detection
C monitor
D bridge
And local
F Se-Connect
G FlexConnect

In my opinion is BDG

You think?
Thank you all