Share your CCNA Wireless Experience

HI,

I am looking for the current valid dumps. Can someone please share to below mail.

{email not allowed}

HI,

I am looking for the current valid dumps. Can someone please share to below mail.

mnk_krishna at yahoo.co.in

Have the exam next weekend and although I have read the OCG guide twice, completed the nuggets twice, done all the questions on the OCG and supported a wireless network for the last year or so as well still feel this may be the most testing CCNA exam and I already have 5 of the others.

QUESTION 22
A wireless engineer has an access point using the 5.725-GHz channel in the United States. In which band is the AP operating?
A. UNII-1
B. UNII-2
C. UNII-2 Extended
D. UNII-3
Dump says C, my research says D. thoughts?

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper/ch3_WLAN.pdf

The channels in UNII-3 are 149,
153, 157, 161, 165 (5.725-5.825) and do not require
DFS and TPC.

If anyone has a current dump I would really appreciate a copy. I have studied the official study guide, taken all kinds of practice tests, and still bombed it last week. I was getting in the mid 90%s on the practice test only to get a 760 on the exam due to questions not covered in the study materials. I have rescheduled the test but am anxious to know I am not just wasting my money. Thanks in advance!

{email not allowed}

Sorry, it isn’t showing my email. It is: purplemonkies84 at yahoo. Thanks!

SamSmith, according to OCG UNII-3 channel 149 starts off from 5.745 while UNII-2E channel 140 starts from 5.700 (chapter 2: RF standards). So, since each channel requires 20MHz width for OFDM, I think the logical answer here is C

hi ,

I’m also looking for the 103 dump.

please sent shiladitya012 @ gmail.com

aww ok, thank you apostb. I guess I read the other wrong. Thank you!

Assalamu Alaikum. My brothers and sisters I am trying to attend CCNA 200-355 certification exam. If there is somebody who can please share the 410 dump and 103 dump, I will remain grateful. I have faith upon you people, Insha’Allah with the blessings of Almighty somebody amongst you will stand beside me. My email:
shafquat_aman19(at)yahoo(dot)com.

Passed 200-355 exam yesterday!

Premium PassLeader 200-355 dumps are still 100% valid now, they have updated dumps with some new questions!!

200-355 dumps collection: http://www.mctsbible.com/?s=200-355

Exam takers please give us some feedback. Is 103Q enough to take the exam?

Hi Everyone! I’ve the exam on the next week, can someone share the 410q and the 103q dumps?
Hope that someone help me! david89iphone at gmail dot com

Hi David, Have you tried Silent Bob’s share? Here it is:

Hello! I passed today 200-355 (my score – is almost 1000).
All questions was from 103Q&A dump. And … here is it:
https://drive.google.com/open?id=0B13uG2pbHt33b1Jsb2I1QXFoUXNhUnBuUTRzaXlXZTVqSlFF
Take it.
Thanks to everyone in this forum, especially to Jelena (she sent me this helpful file)

My brothers and sisters, is there any of you with such generosity to share 410 questions dump in addition with 103 dump questions for my exam coming this Friday ?
If you want please share in my email:
shafquat_aman19(at)yahoo(dot)com

Thanks

Passed the exam. 90% of questions from q103, some with different phrasing. No WCS, only 1 D&D (Absorbtion… etc). I studied OCG and had some on-hands experience. Thanks for this forum.

Hi ToMee, can you please give us some more information? Do you remember some of the 10% questions not present on q103? Can you share them with us? Thank you

HI, anyone with Cisco wireless 200-355 official study guide pdf?
Please help!

ToMee Please send me Q103 and the OCG i don’t have it. my email is {email not allowed}

itmessy @ gmail com

Merry, have you seen this link?

https://drive.google.com/open?id=0B13uG2pbHt33b1Jsb2I1QXFoUXNhUnBuUTRzaXlXZTVqSlFF

Thanks COnr43 do you perhaps have the OCG link?

Merry, unfortunately not… :(

Okay Thanks Con43…

Merry, I found some questions on 103Q dump that I’m not sure if the answers are correct… do you feel the same? Have you already tried to solve the questions?

@Conr43 do you have a list of which ones you are unsure of?

I have several doubts: Q32 I would answer BE

Q57 I’m not sure…

You can display a list of interference detection reports on a controller by selecting Monitor > CleanAir > 802.11a/n/ac or 802.11b/g/n > Interference Devices.

You can display the air quality metrics for every AP on a controller by selecting Monitor > CleanAir > 802.11a/n/ac or 802.11b/g/n > CleanAir > Air Quality Report

You can see a summary of the AP with the worst air-quality rating in each band by selecting Worst Air-Quality Report

So I would answer C, otherwise I cannot see if interference was caused by a radar

What about you guys? Have you found any wrong answers?

So I would go with A on Q57 because…..

A – You can see a column for DFS on top see what APs its affecting

B – This will identify a single AP on 2.4 and 5 but you are looking at an entire site based on the question

C – were dealing with DFS so don’t have to worry about the 2.4 side of things

D – were not worried about a mobility problem here

I see, DFS is the key on Air Quality Reports, thank you

Q48 I would go with A because:

“Converged controllers (WCMs) can be configured as a logical Switch Peer Group (SPG), simplifying roaming between the WCMs.”

Im heading to lunch then I’ll hit you back on this @Conr43 this is a lot of fun….Im going for mine next month…..

I would like to go this month but I’m not having enough feedback from exam takers…
:(

Yeah I’m wanting to take mine at the end of this month as well. Feedback isn’t as good here.

Conr43, go to pages 14-16 and there is some good feedback there.

SamSmith are you only using Q103 dump? If so, do you think that those Q103 answers are reliable? Thank you

Can someone explain question 70 off the 103…since FPSL and the transmitter dBm isn’t given how they can come up with that answer…..there is a similar example in Cisco Press but it almost feels like you have to assume that FPSL is assumed at -69

@Conr43 I think I figured out the explanation for q48….
In converged you have the actual controllers (MC) and the termination for the CAPWAP tunnels (MA)(access switch as a WCM) and they are talking about the controller portion which would be a mobility controller…the MC manages all the MAs and provides functionality for a client to roam between MAs in a mobility group

@Conr43….your answer with Switch Peer Groups (SPG) happens after MAs are tied to an MC they can build CAPWAP between themselves….however they still need a controller (MC) to handle the mobility group

Hello Guys, I have passed today with 985 marks. All the questions are from 103q dumps. However it seems that one answer is wrong in the dumps. BTW passing mark is 860.
Cheers !!!!!

Sorry Guys, i didn’t reach that page yet am still on Q 35. i will check it….

and @Abhishek congratulation!!!! This will give us confidence…

Abhishek, which question are you talking about that is wrong in the dump?

Conr43, I dont know if it’s enough, have yet to take the test.

I go through each question and verify the answer. Pages 14-16 go over the ones that seem to not be right.

Hold on Abhished, Can you please share with us the topic that was covered in the exam???

and how many question where in the exam? and please provide Extra study resources if you have… I want to go write month-end

Q43 I would stay with B:
Mobility controller: A mobility controller provides mobility management tasks including interswitch peer group roaming, RRM, and guest access. One mobility controller is required for each mobility subdomain. A Cisco Catalyst 3850 switch can serve as a mobility controller for small to medium-sized deployments. For large deployments, a dedicated WLC such as the 5760 WLC or WiSM2/5508 WLC with a software update is required.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/white_paper_c11-726107.html

Manny, regarding Q70 you are correct, FSPL is -69dB. You can find the following sentence on cisco ccna wireless book:

“For perspective, you might see a 69-dB Wi-Fi loss over a distance of about 13 to 28 meters.”

Thank you guys for your help on Q43.

Thank you Abhishek, I’ll focus on 103Q dump!

Q67 shouldn’t it be answer A?
Regarding Cisco book:
“In other words, the gain of an antenna is a measure of how effectively it can focus RF energy in a certain direction.”

Q73 isn’t 14dBm?