Share your CCNA Wireless Experience

Hi

I just pass my CCNA, now i want to do wireless can any one help with dump and study materials

I just passed the exam last week (April 5) with a 938.

As @Pharos said (On page 15)… the q375 and questions from this blog are about 90% of the exam.

Here was my path to passing:
– Read the OCG through one time and the second half a second time, for the big picture
– Learned the questions from the OCG disc, to cement the concepts
– Learned the q375 cold
– Learned the questions from this blog (Pages 14 and 15, as of last week)

= 90% of the questions were as stated above.

Interestingly, the q375 had several drag-n-drops, but did not have the one drag-n-drop that is referenced on this blog (Diffraction, Reflection, etc.) — that’s the one I got.

However, knowing the terms from the OCG resolved that, along with feedback on this blog.

One could probably be ok with just the q375 and this blog’s questions (Pages 14 and 15) — it just helped me to read through the OCG to grasp the concepts of Autonomous vs ESS vs WCS, etc., to know how the communication flowed. There were a few questions not included on the q375, nor OCG.

The OCG alone will not suffice.

HIANYONE TO SEND ME STUDY MATERIAL AND DUMP TO stfotolela @ gmail com

Hi @Sikorka.

can you please send me the latest dumps of the new exam 200-355 at {email not allowed}
thanks,
Henri

200-355 PDF dumps for free on Google Drive:

https://drive.google.com/open?id=0B-ob6L_QjGLpcXZkRGszbGJmUkE

New 200-355 Exam Questions and Answers Updated Recently (19/April/2016):

NEW QUESTION 377
What is the effect of increasing antenna gain on a radio?

A. focusing energy in a defined direction
B. adding energy creating a larger cell
C. aligning phase shifting
D. improving frequency specific diversity

Answer: B

NEW QUESTION 378
Which signal strength reading indicates that the engineer is closest to the access point?

A. -43 dBm
B. -67 dBm
C. -87 dBm
D. -100 dBm

Answer: A

New 200-355 Exam Questions and Answers Updated Recently (19/April/2016):

Google Drive File: https://drive.google.com/open?id=0B-ob6L_QjGLpbmpTNV85OXNOUGc

Here are more 200-355 exam questions and answers from Google Drive:

https://drive.google.com/open?id=0B-ob6L_QjGLpcXZkRGszbGJmUkE

Good Luck!

Hi GUYS,
Finally after a long time, here is the new release of VALID DUMPS

website
wireless-tut.blog s p o t . c o m

Any Change in the exam? I want to prepare my self for this 640-722

What about these questions?

A customer is expecting wireless traffic in excess of 20Gbps to traverse a single controller. Which controller model fulfills this requirement?
A. Cisco 2504 WC
B. Cisco 8510 WC
C. Cisco 5500 WC
D. Cisco wireless services module 2
E. Cisco virtual wireless controller
F. Cisco 5760 WC

A company has all IEEE 802.11a/802.11g devices; however, its network administrator recommends installing 802.11n access points to provide greater performance. Which feature on an 802.11n AP provides better performance to legacy devices?
a. Transmit beam-forming
b. Maximal-ratio combining
c. Channel aggregation
d. Spatial multiplexing

An engineer has just deployed a Cisco Aironet 3702 access point with an access layer switch that supports IEEE 802.1af Power over Ethernet. How will the access points react to the wattage that is available in 802.1af?
A. Enable the 2.4-GHz radios with 40-MHz channel bonding
B. disable the BVI interface
C. fail to boot in CAPWAP mode
D. operate in 3×3 MIMO mode

when using OFDM, how many subcarriers are devoted to carrying data?
A.4
B.12
C.44
D.48
E.52

@Jake Scott

1- Cisco 5500 , Cisco wireless services module 2 , Cisco 5760 have enough capacity for this question

———————————————————–

2- i guess “Transmit beam-forming” because work like Cisco ClientLink technology

——————————————————————————

3- based on Cisco Aironet 3700 Datasheet “operate in 3×3 MIMO mode”

——————————————————————————————

4- OFDM uses 48 subcarriers in a single 20-MHz-wide channel, allowing it to
transmit data bits in parallel. DSSS uses a single 22-MHz channel with only one
main carrier signal.

I took my exam last Friday, did not pass, 45% questions were not in the list.

The 4 questions posted by Jake were in the exam I took plus a bunch of new ones.

Answer to 1 is the Services Module.

Passed 200-355 today with 9xx/1000 points.
Passing score : 860

Study Material :
– CCNA Wireless 200-355 Official Cert Guide by David Hucaby
– 375q dump
– Page 14/15/16 this forum
– 2 years design/implementation experience

Finally, New Update released now,
Get Latest Update 100% VALID DUMPS here:

wireless-tut.blog s p o t . c o m

@IronMaiden
Is your CCNA Wireless exam any question about WCS ?? in the Cert guide say CCNA Wireless limited to Prime 2.2 only

@Amirhossein : nothing about WCS.
Page 14-16 in this forum is extremely helpful.

There is a conflict in answers between the 375q dump and the 103q dump. Here is the question:

A customer wants to deploy Cisco Cloud Wireless architecture with 802.11ac capabilities. Which two access points would meet the customer’s requirements? (Choose two)

the 375q dump answer is
Cisco MR34 Access Points and
Cisco MR72 Access Points

the 103q dump answer is:
Cisco 3700 Access Points and
Cisco MR72 Access Points

Since it’s the Cloud architecture I believe the answer is MR34 and MR72. Can anyone confirm this?

@JoJo
for Cisco Cloud Wireless architecture you just can use Meraki Access Points so correct answer is MR34 and MR72

Hello,

@Amirhossein
Remember that 5500 is the full series of AP family. There is 5508 and 5520 and 5560. 5520 is ok and has 20Gb but 5508 not. 5560 has 60Gb.
IMHO correct answear is WISM2.

Regards,
Luk

@Amirhosein Thanks!

So the answer in the 103q dump (question 32 about the Cisco Cloud Architecture is incorrect. The answer should be Cisco MR34 Access Points and Cisco MR72 Access Points

@luk
There are a few answers on the 103q Dump that was just released that are questionable. Here is another:

QUESTION 82
A customer is expecting wireless traffic in excess of 20 Gbps to traverse a single controller. Which wireless controller model fulfills this requirement?
A. Cisco 5760 Wireless Controller
B. Cisco Wireless Services Module 2
C. Cisco 2504 Wireless Controller
D. Cisco 8510 Wireless Controller
E. Cisco 5500 Wireless Controller
F. Cisco Virtual Wireless Controller

The Answer actually could be A or B, right??
The answer that is shown in the 103q Dump is
A. Cisco 5760 Wireless Controller.
Everyone else is saying the answer is B. CWSM 2.
Anyone know for sure?

But in the deployment Guide for the wism2 I found this line.

Data Plane (Encrypted/Unencrypted/ACL) throughput of 10 Gbps

In addition the question says in excess of 20 GB so maybe the 2x 10 gbit Ports of the module aren’t enough.

@Anonymous
Agreed. I’m sticking with the Cisco 5760 Wireless Controller answer. Everything that I have read this one makes more sense.

Hey guys,

my mistake. It has to be more than 20G so 5760 is the best choice.

sorry for my previous post.

no worries @luk Thanks for the input….it’s appreciated!

@ Jojo can you share 103Q Dump!

Thanks.

I cleared 200 -355 on April 22nd, all questions from this web site
I am really thankful to every one who shared their valuable experience
total 65 question out of that one Drag and Drop remaining all MCQ

And, free 200-355 dumps from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpcXZkRGszbGJmUkE

Good Luck!

@ Sam Wren

Can you share passleader 410Q ?

a.talebzadeh90 @ yahoo . com

Hello Sam Wren.
Pleas also share new passleader 410Q to branislav.seman @ y a h o o.com.

Thanks so much.

Any updates for the 410Q dumps?

Passed the exam, 102 Qs are valid, Passleader is fake irrelevant questions and wrong answers.

@SAM

can you share 102 Q ?

a.talebzadeh90 @ yahoo . com

Authentic Valid dumps here https://drive.google.com/file/d/0BwepsouMuqCjN2piZmM5WFJocE0/view?usp=sharing

@SAM

Please share 102 Q ?

Hi friends,

Please share 102 Q ?

can.lluis.bcn@ gmail .com

Thanks!

Dear all,
Kindly share your experience and dumps. I want to appear in exam 200-355. Kindly somebody tell what dumps are valid and how to pass this exam. Kindly share 102 Q and all other helping material. It’s a request for those who have passed this exam, kindly help and guide those who want to pass this exam.
“God helps those who help themselves”
Bundle of thanks.

Are there any sims in the 200-355 exam ?

CCIE Wireless Written Exam, v3.0 — 400-351 new questions:

https://drive.google.com/open?id=0B-ob6L_QjGLpWTFGcGFzN0JuYkE

Dear all,

I pass three days ago the exam 200-355 with 1000/1000 point.I buy in ebay the full name is below

Exam 200-355 Implementing Cisco Wireless Network Fundamentals-100% Test PASS

Last version April2016.
Try guys and you pass for sure this exam.

Have good luck.Thank!

Dear anonymous,
You passed your exam a few days ago. Kindly share your dumps via google drive and share your experience if there is any simulation lab or not. How many questions are there in that exam.
Thanks in advance.

Dear Blain Askew,
This is blog for CCNA Wireless, Kindly share your CCIE Wireless experience in it’s relevant blog.

@ Anonymous

Please share dump!

Thanks

can anyone share 410q, jelenat87 @ y a h o o . c o m

Dear jelenat,
I have 375 passlearder dumps. if you are interested, I can send you.

Sat this exam yesterday and scored 814 / 860.

375Q alone will not help you pass the exam.
at least half of the exam questions i had were not seen on 375Q.
Make sure you go over the questions discussed on pages 14 / 15 of this forum!

Am sitting again next week.

@ JoNo

can you talk about new question ( if you remember)?

many thanks

@ JoNo,
Is there any simulation lab there in exam or just all were dumps. Kindly share your all source of study material.
thanks.

Dear zee,
I would be interested to receive applications cisco 200-355 exam .
You may inviarmele to the e -mail {email not allowed} ?
Thank you. Have a nice weekend