Share your CCNA Wireless Experience

And from the Interference Devices tab?.

you see this:
AP Name Radio Slot# Device Type Affected Channel Detected Time Severity Duty Cycle(%) RSSI DevID ClusterID
Our list is empty, but here can you see the channel that is affected

so this must be the right answer

ilsatch where are you getting the questions from these are the exam questions

is it answer 4 for the interference questions?

can you post some more please

A customer who recently implemented Mac OS X Yosemite finds that the laptops have benn autonegotiating the authentication protocols when performing RADIUS authentication to ISE. What must the administator do to statically set the correct setting for the Mac clients?

1) Select the SSID and change the setting to the desired configuration under Control Panel > Network > Wireless Network and export to the other machines.
2) Create a new network profile with the desired setting using the Apple iPhone configuration utility or profile manager and upload to all mac os x machines.*?
3) set de authentication configuration to use the desired setting under the system preferences network > advanced menu *
4) Delete the ssid and have the users go through the authentication process again, this time selectin the setting during authentication.

did anyone post the answer for this quesiton

I think is the #3 (set the authentication….). But i have my doubts with #2, i don´t have Mac OS X :P

Asti, what was the answer for this question

A customer suspects that a continous transmitter is causing instability with the wireless clients that are operating on the 2.4GHZ wireless band. The customer is trying to determine which channel is being impacted by this transmitter. Which dashboard on the WLC GUI identifies this information?

1) Clear Air – Worst Air Quality Report
2) 802.1a/n – Air Quality reports
3) Statistics – Mobility Statistics
4) 802.11b/g/n – Interference Devices

#1 is not showing Information about the continous transmitter
#2 is the wrong Band
#3 does not show any RF Information
#4 does show the transmitter and the channel that it affects.
So #4 is right

Are these questions from the test or a dump?

cheers, Asti

ilsatch do you have anymore questions you remember cheers,

Hello guys,

For Drag&Drop question:

Absorption
Difrraction
Scattering
Reflection
Free Space Path Loss
Multipath

Distant point to point line of sight
Distant p2p with obstacles
metal cabinet in dense office
pass through a wooden wall
pass through rain
p2p over body of water

My answer is this below:
Absorption—pass through a wooden wall
Scattering— pass through rain
Difrraction— Distant p2p with obstacles
Reflection— metal cabinet in dense office
Free Space Path Loss—Distant point to point line of sight
Multipath— p2p over body of water

What is your opinion about this answer?

Does anyone know which WLC supports 20 Gbps throughput

I see 3650 and 3850 from CISCO site but could not find this answer in the book.

@claudio
I choose multipath in dense Office and reflection p2p over water.
Multipath “works” best in Office environment.
@noxid
The Cisco 5760 supports up to 60 gibt. 6x 10 gibt. This is not in the book.

don’t listen to yu Eric, that dump is not valid, its for older syllabus not the 200 355

Definitely don’t listen to “yu Eric”… it’s hysterical because he copied and pasted some of the text that people wrote in one of the CCNA forums on reddit. Scammer!!

yu Eric is the poster for passleader. PL is trying real hard to increase their sales by trolling on this website. Admin, please remove yu Eric’s trolling post.

WISM2 has 20Gbps
http://www.cisco.com/c/dam/en/us/products/collateral/interfaces-modules/services-modules/at_a_glance_c45-652653.pdf

My dear friends, exam was renewed.
I sat on exam few days ago, passed with 94x in PLND.

All questions were from new VCE at V A L I D D U M P S . W O R D P R E S S . C O M
(Hosted in 4share, no survys)

Good luck!

@Asti
I could be Multipath = metal cabinet in dense office I read below cisco document:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/27147-multipath.html
Common wireless LAN (WLAN) environments with a high probability of multipath interference include:
Airport hangars
Steel mills
Manufacturing areas
Distribution centers
Other locations where the antenna of an RF device is exposed to metal structures, such as:
Walls
Ceilings
Racks
Shelving
Other metallic items
@noxid
WLC supports 20 Gbps throughput is 5520

@yu Eric
Can you share with us some of questions about WLC menu options?

Whats is your answer for this question?
Question 1
If you want to disable 802.11b what do you do ? In which radio is 802.11b on AP 12XX the Radio0 or Radio1?
Question 2
Your Drag&drop answer is?

Hi guys,
i got question from Testhorse 2 days ago,
342 are that valid still ?

Tnx

@yu Eric

Thanks for your kindly reviews, helpful for passing exam!

Can you share me that 200-355 VCE dumps and PDF dumps?

Ilstach and Jose are correct on their answers, here’s what I can share: (I took the exam last week)

#1 Located in London, what’s the highest band used in the 5GHz: (This one does not ask for highest power, it asks for a UNII band in 5GHz that can be used outdoors, if I remember correctly)
UNII-1
UNII-2
UNII-2Extended **This is the correct answer since it is the only one allowed for outdoor broadcasting
ISM 2.4

#2 In version 8.0 code for CUWN, what interface can be assigned an ipv6 address? CLARIFY WITH GUYS
1) AP-Manager
2) service-port
3) virtual
4) management ** I believe this is the correct one, I have the code 8.0.121 and a 5508, I’ll test it tomorrow and give you guys feedback.
5) dynamic

#3 The question about PoE how POE affects the ap in 802af questions
ANSWER: 3×3:3 MIMO
Source:
PoE
802.3af 3700 – No external module installed 3×3:3 on 2.4/5 GHz
3700 + Wireless Security Module 2×2:2 on 2.4/5 GHz + WSM

#4 A question regarding Data Subcarriers in OFDM
44
48 -> Correct
52

#5 In which OSI Layers does IEEE 802.11 work (Choose two)
Physical and Data Link

#6 A customer who recently implemented Mac OS X Yosemite finds that the laptops have benn autonegotiating the authentication protocols when performing RADIUS authentication to ISE. What must the administator do to statically set the correct setting for the Mac clients?
1) Select the SSID and change the setting to the desired configuration under Control Panel > Network > Wireless Network and export to the other machines.
2) Create a new network profile with the desired setting using the Apple iPhone configuration utility or profile manager and upload to all mac os x machines.
3) set de authentication configuration to use the desired setting under the system preferences network > advanced menu
4) Delete the ssid and have the users go through the authentication process again, this time selectin the setting during authentication. **This is the correct one, here is where you choose the 802.1x profile (I have a Mac with El Capitan)

#7%Log-3-Q_IND: apf_site override. Cannot find apgroup CISCO
1) An access point has been removed from a AP Group and assigend to a FlexConnect AP Group
2) An access point has been assiged to an AP group that has reached maximum capacity
3) An access point has been removed from an AP groupand assigned to the default AP group
4) A access point has been assigned to an AP Group that has been deleted. ** CORRECT

Error Message %APF-3-SITE_FAILURE: Cannot find apgroup [chars]
Explanation Cannot find database for the AP group.
Recommended Action Delete and re-create the AP group.

#8 Question about Cisco Prime licensing 97 APs and 4 Controllers
Answer: 500 Licenses, See why below (you have to buy 50, 100 or 500)
Now, here’s the tricky part, what if a customer buys a set of 100 and a set of 50 lifecycle licences? the total would be 150, I don’t remember if that was a choice in the exam, if yes, please respond.

Select LIFECYCLE license part number(s): L-PI2X-LF-N-xx
(xx = 50/100/500/1000 .. 15,000) QTY depends on the number of network devices
(access points, switches, routers)

The VCE file from CBTNUggets at V A L I D D U M P S . W O R D P R E S S . C O M is bad… any suggestion, please?

Checked today the IPv6 feature on an interface:
1) AP-Manager (obsolete)
2) service-port (You can get an IPv6 only through SLAAC)
3) virtual (NO)
4) management (NATIVE IPV6 SUPPORT)
5) dynamic (NO)

So, to keep it short, the answer would be “Management”

Hi,

@ Persona
following cisco prime 2.0 ordering guide: Cisco Wireless LAN Controllers (WLCs), autonomous access points, and third-party devices are not counted against the license count. So we need 100 licences for 97 AP, and no licences for WLC.

You are correct Zigi, your feedback is appreciated :)

Also, another question I remember was:

Refer to the exhibit:
Which type of antenna is represented by the given radiation pattern.

Patch
Dish
Yagi
Omni
Dipole

The answer was Yagi

pleas if anyone have exam contain same these Question ( i took 200-355 exam and took me same Questions)

hi joe
please if you have 200-355 exam and it contain (Q1.Do you remember this scenario?.
Antenna X ——4db loss—-2dbi gain——————-2dbi gain—-4db loss = -45dbm, Q2.In version 8.0 code for CUWN, what interface can be assigned an ipv6 address……)on myemalil :{email not allowed}
thank you

Hi guys could anyone confirm me pls that 375q PL is valid or not. Thanks

It is not, you will get like 65-70% questions from there

70% is better than 0% :D
can you please share the 375q dump?

Ale, you can find it at http://www.examcollection.com/200-355.html. It is almost the same as 375q. I just passed the exam, and I can confirm: this dump and questions from this forum are enough to pass successfully.

Hi Evgeniy,

Congrats on passing your exam.

Would you be so kind to send the dumps you used to my email olaolu1111 @ yahoo . com

I have checked exam collections website but i can’t get the dumps that contains 375questions.

Thanks in advance.

I’ld really appreciate it.

evgeniy can you share it on mega or other hosting ?

i’ve a q342 and a q349 but not a 375q

Evgeniy, Please share you materials.

Hello Evgeniy.
Please also send dump with which you suceeded to brano.seman @gmail.com.

Thanks so much

Is anyone sharing the dump?

200-355 q375 dump: https://yadi.sk/d/G9IpP42Gqg7N4

The questions found on this link https://yadi.sk/d/G9IpP42Gqg7N4, They are valid in order to pass the exam Cisco 200-355 ? How can I do to get all the questions of the new examination ccna cisco – wireless ?
Dear Evgeniy , the questions that are in the dump , are those that you find on the exam for certification?
I hope you answer my questions .
In the meantime , I wish you a good day .

Guys, the questions from 200-355 q375 dump – about 70% of real exam. Also ~8 questions from real exam you can find on this forum (page 14-15). And I had about 10 new uncovered questions.

Passed today… questions from this forum and the guide are about 90% of the exam. good luck

@Pharos

Congrats on passing!

When you say “… and the guide…”… are you referring to the q375?