Share your CCNA Wireless Experience

today passed with 985/1000. 103 q is 100%valid. One question is wrong at 103q dump (other than Q32 – meraki series question) but i dont know which one :) Maybe the antenna question(Q67)

I’ll have my exam until the end of the month so you can also count with my feedback then!

Thank you cancan, see you on CCNP Wireless!

I will also go for CCNP Wireless…. but i will do security+

Check out this website http://www.memrise.com/course/948869/ccna-wireless-wifund/

Good Luck Tester25 with your exam!!!!

Guys,
Which 103 questions dump you are using to appear in the exam?

https://drive.google.com/open?id=0B13uG2pbHt33b1Jsb2I1QXFoUXNhUnBuUTRzaXlXZTVqSlFF

@HelpmeE the test to take is the 200-355. The 640 is the old version and I don’t believe you can take the exam on it anymore. The 200-355 deals with concepts of RF and administration of a Cisco wireless network. There are many moving parts to it. The exam is 65 questions and I believe you need an 860 to pass. If you look on other links you can find dumps, however the best thing to do is really take the time to study the Cisco press, videos, and dicuss questions on forums like this. Learning wireless is not something you can fake. If you get in an interview for a wireless engineer, and the employer knows wireless you will have a tough time.

I passed ccna wireless today with 986.
103q is still 100% valid

@Xanne
Which 103 questions dump you used for your exam?

Dear Manny Thank you very much for feedback.
Bless you

@Anonymous

I used this 103q
https://drive.google.com/file/d/0B13uG2pbHt33b1Jsb2I1QXFoUXNhUnBuUTRzaXlXZTVqSlFF/view

I had the 1 drag and drop
No sim or lab questions
passing score 860

Guys I’m taking this exam on Tuesday, I will tell back at you once done.

The 103questions pdf dump is still valid though.

Hi Guys i’ve planned the exam for thursday, i will give you info after that!! god bless all!

@xanne

Thanks a lot my friend. God bless you.

Congratulations! I just passed 200-355 yesterday! Scored 960/1000!

PassLeader 200-355 dumps still valid, I learned all questions from PL 200-355 dumps (http://www.passleader.com/200-355.html)

P.S. Free 200-355 dumps: http://www.mctsbible.com/?s=200-355

Good Luck!

@Jason Goldfarb

How many total questions are there in the dump, 385 or 410 buddy? Did you purchase that from pass leader website or just use the free dump? Please let me know.

I’m going to write nxt week……

Manny,
They are failovers. Meaning if primary controller isn’t available, then they go to the second controller.

Here is some reading, start at: Assign Primary, Secondary, and Tertiary Controllers for the Lightweight AP

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/69639-wlc-failover.html

Hello @SamSmith….I believe we’re talking about question 88. I presented the question to a CCIE wireless colleague I have and he said if the AP is properly configured and primed it will reach for the primed primary controller first on an AP powder failure. If none of those during the discovery phase it will try the master controller during the join phase.

2nd on the Cisco Press chapter 11 question 4 a similar question is presented and the answer is the primed primary secondary and tertiary address before the master controller

3rd Jerome Henry makes to remarks about this his CCNA wireless 200-355 training videos in module 8.2.2 join phase time mark 3:00-3:10.

4th I posted a Cisco link post earlier discussing this.

I see all this data and it makes me wonder about that answer ya know.

I definitely welcome all this dialogue it’s really helping me understand why answer is an answer. :-)

I think SamSmith was referring to a primary controller failure, but Q88 is talking about an AP power failure so every controllers should be ok and if so, AP should associate to primary controller…

Hey hey @Conr43 what made you change your mind about the answer?

Well, after some more reading I realized that you were right :)

@Conr43 what do you think about the post from Jason earlier….Im just looking for more questions to practice on…I don’t care if they are in the test or not just really practice to get in the mode of the types of questions you see.

Unfortunately, I think there are a lot of noise in this forum, there are some people trying to make some extra bucks. My feeling is that Q103 dump is enough but Dee is taking the exam today so hopefully we’ll have some extra feedback soon. One thing is for sure, you can count with my feedback, I’ll take the exam next week!

back to question 88, The secondary controller has the Master controller mode function on. So would it not then be the controller that the APs would then associate first?

Been google-ing it and my google-fue is not helping.

@SamSmith…..you have to look at the way and AP discover and join process works….so the AP will gather a list of all controllers available through DHCP option 43, broadcasting, previous AP in memory, primary secondary… It will use all those means to find the controllers but then in the join phase it will start looking in order….and first thing up is primary secondary and tertiary config that was set on the controller for that AP…..if that doesn’t work then it will look at Master Control Mode flag from the discovery list…finally if it cant join those it will look to the least AP load on it…If you can find the Cisco Press for 200-355 look at chapter 11 Selecting a WLC…. You can use this link too…
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/70333-lap-registration.html#topic3

@Conr43….yeah I dunno whats noise or not….good luck next week man… Im shooting for next week as well…I’ll definitely give some feedback and monitor this site for a couple of weeks afterward….I wanna see others succeed too…you think there’s a difference if your taking in USA or other countries on what you see on the test?….besides the obvious stuff like country codes and stuff…

Manny I don’t know but I would say that all the exams are equal everywhere…

I am taking the exam tomorrow morning and will let everyone know. I read the OCG and have been studying the 103q guide.

Good luck Jacob, I’ve followed the same plan! Please let us know what happened on your exam… thank you

Was wanting to take it next week, need to get a day off of work.

Manny, thank you for your help/response, much appreciated.

@SamSmith no problem at all…..good luck when you take it….if you got any other questions or having a problem understanding a question/answer let us know…we all win by asking questions…

Regarding Q101, did you find any explanation why the correct answer is A? What’s the relation between DHCP option 43 and DNS here?

I took the test before I knew about the 103q file and I got an 811 (failed). I used a file called 200-355UpadatedJan2016.vce that can be found on kat.cr which has a ton of questions, nearly 400, but most, of course, are not on the current exam (many were though, like half or more the Qs on the real exam were familiar). Lets thank the person(s) who posted a link to the googledrive file because I’ve looked through the 103 questions and it has many of the unfamiliar ones that were on the real exam – I know because I took it, especially among the last third or so of the 103. Thanks to those who shared that pdf. That is gracious of you. The OCG is too long. There’s too much information you will not be tested on. I found some CBT nugget videos but the presenter has an unappealing stream-of-consciousness style. Sorry, does not prepare me for this WIFUND exam. Need the dumps. Need them now. Thanks again. Will be retesting soon.

PS: compare 103 with the larger file and check for overlapping questions that may have contradicting answers.

@Toccata any questions you might remember we can all go over. Anything you remember and confused on their answers. We can use those to go over and talk about on this forum.

@Jacob any update about the exam? Im planning to sit it this Friday or next Friday please advise if 103q dumps is enough. thank you!

I thought the drag and drop was tricky. Seemed like some of the items could go in more than one spot. It was about the behavior of RF in the environment. I thought free space path loss could apply to multiple spots. But now that I’ve seen the answers it looks like we have to think about the subtle distinction between reflection and multipath, then it should be clear that each item has one best spot.

Passed, 977/1000

103q is 100% valid.

I read OCG and only studied 103q. Everything on the test was word for word exactly from 103q.

Thank you Jacob!

@Jacob thanks for the interesting feedback….which ones do you think you missed?

Not sure, but I answered all exactly as they were on the 103q.

Thank you all for the help here.

Good luck all, I am moving on to the CCNA Collaboration exams and then to CCDA.

Hi Manny, have you seen my doubts regarding Q101?

@Jacob

Hi friend. Have you used the link of google drive provided on the thread #31 to read 103 questions? Please let me know. I have scheduled my exam on Monday next week. Just for confidence I am asking you my doubt. Thanks

@Jacob Thanks for the feedback will be taking the exam next week hope questions doesn’t change yet.

Hi can anyone explain the answer for question 73 of 103 dump
“When calculating the link budget for a wireless point-to-point bridge, the engineer notices that one antenna has its gain marked as 2.85 dBd. With a 20-mW access point and 3-dBi loss for the cable, what is the approximate EIRP?”
A:15dBm
B:18dBm
C:22dBm
D:25dBm
Answer: A