Share your CCNA Wireless Experience

Hi all,
Please share 200-355 dumps 459q .

e-mail
hbkhite at gmail dot com..

Lets take a step back and talk about the purpose of Flex connect. FC was design for the purpose of providing wireless connectivity to remote locations, where you did not have to install a WLC each time. With that said. You have a 10 remote office with 10 FC aps in each office. You are pulling DHCP centrally. Say the link fails ..

What is not true in this situation?

A. Your wireless clients that have DHCP will work as normal or until the lease is up. New clients won’t connect.

B. Your wireless clients that have DHCP will work as normal. New clients will obtain new IP from the local Switch

C. Your wireless clients that have DHCP will stop working. New clients won’t connect.

I’m thinking that answer correct is the B, because if the client have a IP work independ if DHCP is ko.

@Wi-Fi-Guy
Pouring over this forum and you seem to be legit. Any chance you could email me your study materials or dumps that you used? o.a.k.l.a.n.e.8.7.@.g.m.a.i.l
Much appreciated!

IT is B and C.

By the way, it meine for FlexConnect to be usefull, it will need local DHCP Service. IT means a lot of Work for the admin.

Lets take a step back and talk about the purpose of Flex connect. FC was design for the purpose of providing wireless connectivity to remote locations, where you did not have to install a WLC each time. With that said. You have a 10 remote office with 10 FC aps in each office. You are pulling DHCP centrally. Say the link fails ..

What is not true in this situation?

A. Your wireless clients that have DHCP will work as normal or until the lease is up. New clients won’t connect.

B. Your wireless clients that have DHCP will work as normal. New clients will obtain new IP from the local Switch

C. Your wireless clients that have DHCP will stop working. New clients won’t connect.

Answer: B + C

By the way, it means for FlexConnect to be useful, it will need a local DHCP Service. IT means a lot of Work for the admin, if one has many branches…

And it is not only DHCP service…When disconnected from HQ, you also loose DNS service + Active Directory and Radius….

I think the only reason to configure Flexconnect on a branch is if you have Voice application with a Voice gateway in the branch that has its own Internet connection.

Even the printer story will not work, because normally, the access to the printers is controlled by the active directory service and sometimes worse, the printers are available only over a print server, that is located in the HQ.

Please correct me if I am wrong !!!

Finally, the only real benefit I can see in using Flexconnect, is the higher performance like in the converged access, since the data traffic does not need to reach the WLC, which means less processing and power needed at the wlc and the fact that local traffic does not leave the branch office.

But once disconnected from HQ, it is useless.

Please correct me if I am wrong !!!

What do you want to do with dumps if at the end, when you get a contract to build a wireless network, you only know the answers of the dumps ?

What would you say? aaahhh, sorry this was not in the dumps ?

@Anonymous there are thousands of people who know build a wireless and they not have CCNA.
What is not normal is to study a topic about CCNA wireless and then ask questions that are not on the official cisco.

Hi Raticulin, if you are referring to the questions I have posted, be aware that they are NOT from Cisco. But maybe, this will inspire cisco….who knows :-)

I don t know if the questions I have posted are in CCNA topics, anyway they have to do with the wireless network I am building in my beginners LAB and these are topics I had to understand to get it working.

Hello Nomade ,What I want to say is that the questions of the CCNA wireless exam in some occasions is impossible to correct if you have not seen the exam before, such as:
What is fading?

Please , anyone can know if that questions have sense ??

What is required from the deployment when using voice or video applications? (Choose 3)
A. RSSI cell edge of -25
B. RSSI cell edge of -16
C. SNR of
D. Pending

D

What is required from the deployment when using voice or video applications, choose 3:
1) RSSI cell edge of -25
2) RSSI cell edge of -16
3) SNR of 25
4) Cell Overlap of 20%
5) RSSI -67
Answer: 3,4,5

Thank you Grad , i´d like know if there is a dump new , someone know if the last is 437 Questions is still valid???

CCNA Wireless 200-355 Dumps
100% valid and latest

https://youtu.be/BphtGNFr_AA

Thank you Mather fuker

Which items is a deployment model that that allow to separate the Data plane from the Control plane? (choose two)
A. FlexConnect
B. Central Wireless
C. Converged Access
D. Switched Access
E. Bridge mode
F. Cloud
G. CAPWAP
F G

Can someone please explain to me how F G is the correct answer because as far as I knoe CAPWAP is not a deployment model. It’s a type of encapsulation just like you have 802.1q encapsulation for VLAN tagging. I’d appreciate it is someone explain to me.

It is A,F

“The FlexConnect wireless architecture distributes data plane (traffic forwarding) operation out at the edge, while centralizing control plane operations in a controller in the data center.”

http://www.revolutionwifi.net/revolutionwifi/2011/05/cisco-flex-7500-cloud-wireless.html

PassLeader still valid , passed 200-355 with 9XX/1000 few days ago (Sep/2X/2017).

Good Luck!

Failed today 8XX, so close.

About 50 Questions from 437q (I have noted which ones I encountered)
About 4 Questions from the Word Document in the forms.
About 8 new questions that I noticed.

I sorry grad, you have try again. What is the Word Document? Do you remember any questions new??

Hi everyone. Could someone please be kind enough to spare extra time from their busy schedules and send me valid dump 459q or anything recent. Please am pleading I have exam next week. Thanks in advance.

medkaloks06 (@) gmail.com

Sorry for you Grad…I also failed some weeks ago with 8XX…

It means 10 of your Answer were false….but which one ? Do you remember ?

There are some questions in 437q, I believe they are wrong…So it could some of them ?

@Martin Guerrero

New version of 437q should have less questions not more, as you are claiming (459q~~~NEW VERSION DUMPS)

This is because there is no WCS questions it has been replaced with Prime….I know this, because I had the exam….

So, be smart, the next time you want to distribute your spam, use a lower number in the naming of the file…so that one could think you have purged the file and updated it with some few new questions…

Here is an example of questions, I think they are wrong:

Question 437

20 dBm (Transmitter) – 2 dB (cable loss) + 4 dBi (Antenna Gain) – 69 dB path loss + 4 dBi (Antenna Gain) – 2 dB (cable loss) = ?

A. -45
B. -46

Answer: A

Ok, this is a simple addition subtraction and A is correct…BUT look here

Question 382
—————-

Refer to the exhibit…An network engeneer needs the far end of a wireless bridge at -45 dBm.

?? dBm (Transmitter) – 2 dB (cable loss) + 4 dBi (Antenna Gain) – 69 dB path loss + 4 dBi (Antenna Gain) – 2 dB (cable loss) = -45 dBm

A. -118
B. -28
C. -20
D. 20
E. 28
F. 118

Answer: E

Of course this is wrong. First on the exhibit there is no value for the path loss. But I think it is the same question as Question 437, so if it is the case, the correct would be 20.

It would be 28 only if the path loss value was 77 dB but this is not the case on the exhibit.

Here is another example:

Questions 103
—————–

An indoor 1240 AP is booting and has obtained an IP address by use of DHCP. The AP has confirmed prior controller IP addresses from a previously joined mobility group stored in NVRAM. Which action will AP take next?

A. DHCP option 43.
B. Layer 2 LWAPP discovery broadcast.
C. Layer 3 LWAPP discovery broadcast.
D. DNS resolution of CISCO-LWAPP-CONTROLLER.localdomain

Answer: A

I think this is wrong. Compare it to the next question:

Questions 237
—————–

Access points must discover a wireless LAN controller before they can become an active part of
the network. In which order does an access point try to discover a controller?

A.
Layer 3 CAPWAP or LWAPP broadcast discovery
DHCP option 43
Locally stored controller IP address discovery
DNS controller name resolution

B.
Layer 3 CAPWAP or LWAPP broadcast discovery
Locally stored controller IP address discovery
DNS controller name resolution
DHCP option 43

C.
Layer 3 CAPWAP or LWAPP broadcast discovery
Locally stored controller IP address discovery
DHCP option 43
DNS controller name resolution

D.
DNS controller name resolution
DHCP option 43
Layer 3 CAPWAP or LWAPP broadcast discovery
Locally stored controller IP address discovery

Answer: C

So we have here the same question with different answers.

And here again:

Question 356
—————

An AP using version 7.0 MR1 broadcasts a Layer 3 CAPWAP discovery message on the local IP subnet. Which step does the AP take next?

A.Determine if the controller responses include the primary controller.

B.Determine if the controller responses include the master controller.

C.Send a discovery request using DHCP option 43.

D.Send a discovery request using DNS.

E.Send a discovery request using locally stored information on the AP.

F.Send a discovery request using OTAP.

Answer: E (that means primary, secondary and tertiary that are set in the AP)

@Highlander
On questions 437/382, you are right. They’re doing the math wrong.

On 103/237, both are correctly answered.

Starting with the 2nd question, C is correct. That is the right process for Discovery. (Official Cert Guide pages 270 – 271).

The first question is simply asking what process comes after the WLC uses the locally stored address for Discovery.
B. is deprecated and no longer used
C. already happened according to the question
A. is next. Even though the AP has gotten an IP by DHCP, it doesn’t use the Option 43 info it received until this part of the Discovery process.
D. is always last. Even on newer AP’s, it will try to resolve CISCO-LWAPP-CONTROLLER after CISCO-CAPWAP-CONTROLLER.

Thanks Foxx!

Then the question 103 is the D?

@Highlander
On questions 382 ,

you have to look the date of the question , because say that cable with 4 dB loss and antenna with 2 dBi gain then :

“28” dBm (Transmitter) – 4 dB (cable loss) + 2 dBi (Antenna Gain) – 69 dB path loss + 2 dBi (Antenna Gain) – 4 dB (cable loss) = -45

QUESTION 210
What is max power for an AP for all regulatory bodies?
A. 10
B. 8
C. 1
D. X
Correct Answer: B

But is wrong correct is C

Man it is super hard to post here. Every time I try and put something relevant in it never posts…..

Hi everyone. Could someone please be kind enough to spare extra time from their busy schedules and send me valid dump 459q or 70q oranything recent. Please am pleading I have exam next week. Thanks in advance. Please please i beg.

medkaloks06 (@) gmail.com

Will start easy I guess. Once we have a answer we will move on. BTW Q103 and Q382 we on the test.

Can we review Q268 (I chose 2) and Q422 (I chose Predictive)

New Questions 1
What is the path of the packet from Client A to Client B in local mode:

WLC—>Switch->AP2->Client B
|
—>AP1->Client A

I remember my answer, Note that all answers had WLC in the answer.

Did not display properly:

Client A
..|..
AP1
..|..
Switch–AP2–Client B
..|..
WLC

Provide details on the path and proof and I will post a new Q.

Someone please help me please. I need to pass this exam. Please. Any latest dump will help.

It’s amazing how people ignore your cry for help in the forum. And so interesting seeing others trying to dumps to fellow student. Too bad

@Foxx, @Raticulin

Questions 103

This question is mal formed and old anyway because LWAPP does not exist in the Exam. Mal formed because the AP has just obtained an IP from the DHCP. The DHCP broadcast has nothing to do with LWAPP or CAPWAP discovery broadcast.

It means that the AP has not yet sent any of such a broadcast. At this stage, the AP should first send an LWAPP or CAPWAP discovery broadcast, then the other methods…

The order never changes, the algorithm is fixed to this order and does not evaluate the response of the WLC nor stops the running algorithm to start something else.

It is for me strange, that this is supposed to be a question for an exam, then it is not clear for me, what does the knowledge of the order in which an algorithm runs brings to the student? Nothing.

So for me the answer should be for

Question 103 (the LWAPP version) –> C. Layer 3 LWAPP discovery broadcast.
Question 237 (the CAPWAP version) –> C. Layer 3 CAPWAP / Locally stored info / DHCP / DNS
Question 356 (after broadcast) –> E.Send a discovery request using locally stored information on the AP.

The logic of the algorithm is quite simple to remember for the exam.

The AP first try on its own and by its means. So first he uses the cable and blast a L3 broadcast in its subnet. Then it looks in its memory if he does remember anything from the past.

The AP then ask others to work for him and provide him with the needed info. First DHCP, because already obtained the option if available then at the end the DNS.

@Raticulin

Ah ok I see, I made a mistake while copying the Question 382

It is 4 db loss and 2 db gain. and i have inversed. Thanks!

@Raticulin

Question 210. You are right, the answer is wrong and yours is correct.

You see, you confirm that you may trust the questions of the dumps but do not trust the answer. The question may be a real exam question but not the answers, they are from students or worse.

@Grad

>>>Provide details on the path and proof and I will post a new Q.

Ok grad, this is a simple question, local is Probably the most common and well-known mode a LAP operates in mainly because this is the default mode a LAP will operate in (Unless you are running Flex controllers). In local mode, the LAP maintains a CAPWAP (or LWAPP depending on your IOS version) tunnel to its associated controller. All client traffic is centrally switched by the controller which why LAPs have been referred to as ‘dumb’ APs, primarily due to the fact it does very little thinking on its own. As a matter of fact, if a LAP operating in local mode loses its connection to the WLC, the LAP will stop forwarding and begin looking for the controller. Until the LAP (operating in local mode) joins another WLC it will not forward any user traffic.

So the path should be in local mode:

Client A >> AP >> SWITCH >> WLC >> SWITCH >> AP >> Client B

So the path should be in Flexconnect mode:

sub-mode connected central switching / central authentication
Client A >> AP >> SWITCH >> WLC >> SWITCH >> AP >> Client B

sub-mode connected local switching / central authentication
Client A >> AP >> SWITCH >> AP >> Client B

sub-mode standalone central switching / central authentication
Client A >> AP >> SWITCH >> STOP

sub-mode standalone local switching / central authentication
Client A >> AP >> SWITCH >> AP >> Client B

@Grad
>>>Can we review Q268 (I chose 2) and Q422 (I chose Predictive)

Questions 268

How many types of control frames are only used in PCF mode?

A. 0
B. 1
C. 2
D. 3
E. 4
F. 5

Answer: D

The answer is wrong, because:

The control frames that are used in PCF mode are as follows:

Contention Free End (CF+End)
Contention Free End Ack (CF +end_ack_)
CF-Ack
CF Ack+CF Poll
CF-Poll

http://www.ciscopress.com/articles/article.asp?p=1271797&seqNum=2

So correct is Answer: F

Posting is difficult here…

@Grad
Please do you remein more new questions ? Yoy told about 4 Questions from the Word Document in the forms. What is that??

When AP in its default configuration mode connects to a Cisco WLC, which methods are available for remote management access to an AP?
a) SSL and SSH are avilable only after configuration by a Cisco WLC v7.0
b) SSH only
c) HTTPS and SSH
d) SSH and Telnet
e) SSH and Telnet are avilable only after configuration by a Cisco WLC v7.0
Answer: d
Eh? How is this possible? I am working with CUWN for ages and as far as I am aware, without configuring SSH/Telnet access on the WLC there’s no other way to manage LWAP, except Console! So, correct answer should be E

QUESTION 102
When using multiple SSIDs on a lightweight AP, how does the traffic of each SSID reach the 802.3
network?
A. provide routing between them at the core so that the SSIDs can reach the internet
B. configure 802.11q trunking on the Ethernet switch port that is connected to the AP
C. configure ACLs at the switch port that will allow all desired SSIDs to pass traffic
D. configure the SSIDs on the WLC and it will regulate the traffic based on traffic type

Correct Answer: B

If the B say configured the port of lightweight AP like trunk , the LAP are connect with access port to switch .
I think that nothing question are correct .