Share your CCNA Wireless Experience

@Anthony Monostra
you meaning that only 291q dump is enough for passing the exam ???? where 103q&411q and stephen link ??

@Seag

I think it’s yet another one of those questions where you have to ask, “What does Cisco want as an answer?”. Honestly, A,B,D,E are all correct.

When you add a mobility member in Controller > Mobility Management > Mobility Groups, you have to put in the Management IP, MAC, Mobility Group Name, and the hash (if any). You’ve already set the virtual IP when you set up the controller. In that case, A,D,E is correct.

The question and the available answers are poorly chosen.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010010010.html

Hi everyone,

I am preparing for my exam in WIFUND. I noticed that there are two dumps shared in this forum: 411q and 103q. There are takers who said that they passed using 103q that is still valid (at the time they took the exam).

My question is should I focus on reviewing 103q or the 411q is still necessary?

Let’s continue collaborating here. Thank you!

@PrenchPries
411Q IS APPROXIMATELY INCLUDING ALL 103Q
PrenchPries WHEN YOU WILL TAKE THE EXAM 200-355 ?
THANKS

@all here,

I just passed my exam on Saturday.
You can use 411q and the question that IMM share, but it’s not exactly same and there are some new question. As long as you know the wifi basic (I learn using CBT nugget’s video) you should be able to pass this exam..

Good luck guys.

@JustFinished
Congratulation
WHAT’S YOUR MEANING IMM SHARE ?
HOW MANY QUESTIONS ARE OUTSIDE THE DUMPS 411Q&103QAND291Q?
THANKS

@netoker

seems that the link already vanished should be https://docs.google.com/document/d/1w9p9vrPsx_WIrFnptOpWHJ8AFfFg1Sx_jBiGWyAABps/edit?usp=sharing
before, sorry I didn’t make any back-up back then.
But Learn about SNR, RSSI and some related with WLC GUI, I can’t really remember due to too nervous during the exam.

I think I just blessed to be able to pass this exam

@netorker: I am planning to take my exam by the end of november. We need to collect these info from our fellow exam takers and consolidate for everybody’s reference.

@All: IMM’s link no longer work. Did anybody manage to make a back-up of the file? Any info/file about the the latest set of CCNA-W questions is very much appreciated. Let’s do this!!

@PrenchPries
my dear i don’t think that i’ll wait for end the November
i’m planning to take the exam by the end of octoberr

@all
i’m calling with PrenchPries
IMM’s link no longer work. Did anybody manage to make a back-up of the file?

Link for @IMM file:

https://drive.google.com/file/d/0Bx1YGbI8lbwQa25pQl80WnU4UFE/view?usp=drive_web

@Guilherme1846
more thanksssssssss

the last updated file from IMM:

https://drive.google.com/open?id=0BzQDRVInAZVCaWJSZ0oxUnlUOTg

QUESTION 223
In a network with a deployed Cisco WLC, which two entities must be configured with the shared secret key
for 802.1X authentication? (Choose two.)
A. WLC
B. RADIUS server
C. AP
D. supplicant
E. wireless client
Answer: AB

Shouldn’t the answer be B,D. Doesn’t the supplicant need to “supply” the shared secret in order to enter the network? This can mean either…The RADIUS server needs a shared secret key with the AS. But the supplicant/wireless client needs a matching secret key with the RADIUS server.

Actually kind of strange how they would have “supplicant” and “wireless client” as two choices when they mean the same thing. So after reading again A,B was correct? They are specifically asking for the communication between the Authenticator and the Authentication Server??

QUESTION 11

An engineer has been asked to upgrade the FUS on the Wireless LAN controller. How can they monitor the status of the upgrade?

A. WLC GUI
B. WLC CLI
C. WLC Console
D. WLC Management in Prime Infrastructure

Correct Answer: C

I don’t get this answer. What’s the difference between the CLI and the Console?

I would assume in this question is referring to CLI as an application/software logging in through console would be wired in/admin privileges

VOICE – RSSI -67 (no higher) SNR 25 (no lower)

DATA – RSSI – 73ish (no higher) SNT 20ish (no lower)

hi guys,
i cleared the exam. Only single and multiple choice questions(no drag
n drop). i prepared from 411 questions. I got almost same questions as given in the word doc last updated by IMM. So study all the questions from 1st till last question in that doc.

Order of options in exam is different so make sure you know the exact answer to avoid any confusion, especially for multiple choice questions. learn from cbt nuggets to manage any unknown questions.

ALL THE BEST

@noddy
Congratulations
How many the questions are outside the 411&291&103 dumps and imm file
More thanks

@noddy

What was your score out of curiosity. Was it in the 900+ or 860+

@Guilherme1846 @leno:
Thank you!!

@Seag:
Yes the answer is WLC and RADIUS server. Also the right one is via WLC console. CLI can be accessed via ssh/telnet which is not advisable when upgrading.

@noddy:
congratulations! no lab sim on the exam?

hey guys this is a really good read for cell coverage overlap and snr

looks like the overlap should be 20% for 2.4Ghz and 15% for 5Ghz

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan41dg-book/vowlan_ch3.html

@cisco man – i only studied 411 as the other 2 are its subset. Almost all the questions where from IMM file.

@Mike – i got 925+

@PrenchPries – i didnot got any lab sim or drag/drop.

Hello Guys,

can anyone help me with the question
Refer to the exhibit. A network engineer needs the far end of a wireless bridge to receive at -45dBM.

i dont get it, how can 28 dbm be the right answer? Can somebody tell me the steps?

THX

Assuming 69dB free space loss.
Tx – cable loss + antenna gain – FSL + antenna gain – cable loss = Rx
TX = Rx + cable loss – antenna gain + FSL – antenna gain + cable loss
Tx = -45 + 4 -2 +69 – 2 + 4 = +28dBm
John Smith September 15th, 2016

from where do you assume 69dB free space loss? There is nothing written in the exhibit??!!
thx for your help

I have a vague memory about one new question that no one have mention here. It was regarding EAP-FAST and PAC process. Can someone who also did the test, remeber what they were specifically asking for? Some of the answers were server and client key.

All,

Passed the exam yesterday with 950+ using the word doc and studying from the 411Qs…

@Steven
Congratulation
not questions outside word doc and studying from the 411Q ??
and what about drop and drag ??
thanks

@Steven
Congratulation
not questions outside word doc and the 411Q ??
and what about drop and drag ??
thanks

No drag and drop most of them came from the doc answers where in different order tho so understand the questions and answers…..

Like they said before know the DFS Channels

there was probably 2-5 questions that weren’t in the doc nor dumps but if you study 411 and doc you will be fine.

thanks steven

but some questions the doc without its answers ? help please

From the DOC

NEW 6:
What is required from the deployment when using voice or video applications, choose 3: (Something like that)

SNR 25
RSSI -67
Cell Overlap of 20%

NEW 6:
What are the sources of interference you will find when conducting a site survery before deployment(Something like that)?

1-Bluetooth Headset
2-Microwave Ovens
3-Analog Wireless Camera
4-AdHoc Wireless Camera
5-AdHoc Hotspot

Answer: 2,3,5
NEW 7:
what are reqs for VoWLAN:
A) RSSI -67
B) SNR 25
C) 20% overlapping cells
Answer: Answers are correct
NEW 8:
what is SNR needed for 54 Mbps
SNR 25

NEW 9:
what is max level in Cisco WLC TPC for all regulatory domain
Answer: ? I selected 1

If you have any questions or concerns on specific questions just post and ill let you know how i answered

Remember 2.4Ghz needs 20% cell overlap 5Ghz needs 15%

Also take not i didnt get 100% on the test so i know some of my answers were wrong I am confident tho if you study the dump and doc you will pass.

Good luck to all!!!

soooo thanks Steven

Can someone explain if channel wide of 20MHz or 22MHz is correct answer to this questions? I’ve seen both.

Which four options are the characteristics of the original 802.11 protocol? (Choose four.)

A. Defined DSSS and FHSS as possiblemethods for modulation
B. Designed to operate in the 5 GHz ISM frequency spectrum
C. The most common deployment is three non-overlapping channels that are 20 MHz wide
D. The protocol sets the maximumthroughput at 1 Mb/s or 2 Mb/s
E. Defined FHSS and OFDM aspossible methods for modulation
F. The most common deployment is three non-overlapping channels that are 22 MHz wide
G. Designed to operate in the2.4 GHz ISM frequency spectrum
H. The protocol sets the maximum throughput at1 Mb/s

Hello Guys,

can anyone help me with the question:
Refer to the exhibit. A network engineer needs the far end of a wireless bridge to receive at -45dBM.

i dont get it, how can 28 dbm be the right answer? Can somebody tell me the steps?

Someone wrote here that he assumes 69dBm Free Loss, from where is this information?

THX

-Overlapping Channels
Each channel on the 2.4 GHz spectrum is 20 MHz wide. The channel centers are separated by 5 MHz, and the entire spectrum is only 100 MHz wide total. This means that the 11 channels have to squeeze into the 100 MHz available, and in the end, overlap.

http://www.metageek.com/training/resources/why-channels-1-6-11.html

About snr for 54mbs. I have Google-search and some says 19, other 21/22 and one Cisco-site says 25db.
Another of the “good” question in this exam

steven
Why do you not select Bluetooth headset in q6

@Micke that did only confuse me more. According to the official cert guide. DSSS is using 22MHz wide channels. And the correct answer is atleast A and D. Anyone else can help me understand this.

Thanks for sharing premium PassLeader 200-355 dumps!!!

I have passed my 200-355 exam yesterday by only learning PassLeader 200-355 dumps (http://www.passleader.com/200-355.html) [410q VCE and PDF]

100% valid now!!!

P.S.

Free PassLeader 200-355 dumps on Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpcXZkRGszbGJmUkE

103q is still valid?
please somebody confirm.

where can i found this “DOC”?

Hello Guys, i just upload the new ‘DOC’ with steven’s feedback.

https://drive.google.com/open?id=0Bx1YGbI8lbwQa25pQl80WnU4UFE

If you can can double check the answers according certification guide it will be helpful.

thanks

@Steven, did you studied 410Q? or just 103q + Doc? I know 410q has a lot of old questions like WCS and etc.

What do you recommend me? Study all 410q questions?

103 it is not valid only 5 question from this dump,no labs,no drag and drop.
410Q,+291+103q + Doc? it is the better choice.

to be honest you should be good with the doc alone and some basic Wireless Knowledge…… I dont remember seeing any other questions other that already in the doc.