Home Share your CCNA Wireless Experience

Share your CCNA Wireless Experience

Please share with us your experience after taking the CCNA Wireless 640-721 exam, your materials, the way you learned, your recommendations…

Your posts are warmly welcome!

Please don’t ask for links to download copyright materials here…

Comments (50) Comments
Comment pages
1 4 5 6 7 8 10 841
  1. openalex
    April 5th, 2012

    Pass 989
    Dumps still valid. I used this site and Cisco.Prepking.640-721.v2011-11-22.by.michu.213q.vce + Cisco.Testking.640-721.v2012-03-21.by.BawlsDeep.146q.vce.
    Six new questions ( I remember question: how many channels in 802.11a?)

  2. DD
    April 6th, 2012

    I used this site and Cisco.Testking.640-721.v2012-03-21.by.BawlsDeep.146q.vce to prepare. 79 Q + 1 D&D (First one on this site); Q @ # of 802.1a channels was how many available. NO real surprises so passing was easy

  3. WLC
    April 13th, 2012

    Passed today, 989/1000, dumps valid as described here. 80 questions overall, some (new, not listed) test questions as well but apparently were not counted.
    Great site. Thank you!

  4. eagertopass
    April 14th, 2012

    CCNP, can you share your materials for CCNP Wireless?

  5. CCNA
    April 17th, 2012

    Can you please mention the new questions if you can remember speacially when you say you passed with 1000/1000. I just need the question and will find the answer. In addition, I have seen the question above 802.11a channels, I belive the right answer would be 28 becasue it has 23 + 5 (turbos).

  6. ALI
    April 17th, 2012

    If any one have ccna wireless cisco book please send me at ali.kool@gmail.com.
    I’ll be gratefull to 2 u in advance!!!

  7. Leo
    April 20th, 2012

    Passed 1 hour ago!

    989/1000

    New Questions (7-8) and one D&D.

  8. mutaz
    April 21st, 2012

    leo do you remember the new Qt?

  9. RoOmi
    April 21st, 2012

    Leo would you mind to share new questions please?

  10. Jaime
    April 23rd, 2012

    Hi Guys, any examination recently presented ???

  11. WSL
    April 24th, 2012

    Hi all, i’m looking for a valid questions dump for CCNA Wireless, any body got it? please post the link here .. i will do the exam in May 6th …

  12. Lucky
    April 25th, 2012

    Passed
    Dumps still valid but with addition of new questions explained in this section.
    No new questions.

  13. mutaz
    April 26th, 2012

    Passed 978
    Dumps still valid
    5-4 new questions

  14. vel
    April 26th, 2012

    Hi all i cleared today with 989 marks. Most questions from
    this site but 8 to 10 new questions.

    I like to tnk wirelesstut for the great help

  15. RoOmi
    April 26th, 2012

    guy please whoever recently pass, please share some questions atleast not answers

  16. Jup Doesenbier
    April 27th, 2012

    Passed with 967 if you read the questions here and examencollection -> YOU will pass. One DD is slighty differently worded but just use your brain.

  17. DP
    April 28th, 2012

    I got 1000, some 7-9 new questions will be able to answer easily if anyone has read book and have experience

  18. BADISODA
    April 29th, 2012

    Hey Guys, Passed CCNA Wireless 640-721 today with 900+ something. Questions in this website are still valid. As previously mentioned by others there are few new questions. Some of them below.

    1. Whats the maximum devices supported in Wireless Express solution. Option were like 2wlc + 6 ap, 4 wlc + 3 ap each etc.

    2. How many Rougue APs can be contained by Wireless LAN Controllers – Options were like: 3, 6, None, All of them etc.

    3. Sorry I dont remember others.

    Note: Last day to give your 640-721 wireless exam is on 11th May 2012 and after this you need to give exam for new version i.e. 640-722.

    Logging off. Good luck Every 1.

  19. someone22
    April 30th, 2012

    any answer?

  20. RoOmi
    May 1st, 2012

    @wirelesstut….is this website getting any updates sooner or later? becasue it seems like you left this alone isnt ?

  21. WSL
    May 2nd, 2012

    @ BADISODA

    if the question was about Cisco Mobility Express Solution then the answer is 2 WLC + 6APs each or in other way can support up to 12 APs with 2 WLC

    ref. http://www.cisco.com/en/US/prod/collateral/wireless/ps7306/ps7319/ps7338/prod_qas0900aecd8060c860.html

  22. RoOmi
    May 2nd, 2012

    @WSL I agree with you as becasue it is also mention in Cisco Guide on the Mobility Express Solutions,, what about the Q2, I belive that would be 3 but question should be like how many rogue APs contained by an AP on a wireless LAN controller, isint ?

  23. m4r
    May 4th, 2012

    According to question 2 – point 1.16 -> http://www.perihel.at/wlan/wlan-wlc.html

  24. RoOmi
    May 4th, 2012

    @m4r……thats exactly the same thing as I mentioned earlier…..single AP on the WLC can contain max 3 rogue APs…

  25. WSL
    May 4th, 2012

    @m4r and RoOmi

    if one Ap can contain 3 rogue Aps and wlc can manage up to 100 Ap thats mean the wlc can contain 300 rogue Aps?

  26. WSL
    May 4th, 2012

    @all

    any body know what are the three types of alarm in WLC?

  27. RoOmi
    May 4th, 2012

    I have gathered some of the question from previous comments and from other wesbite whic apparently came into the exam.

    Q1 – The recommended load-balancing method for Catalyst switches is
    Ans – port-channel load-balance src-dest-ip.

    Q2- How many Rougue APs can be contained by an AP on Wireless LAN Controllers?
    Ans – 3 rogue APs per single AP

    Q3 – Whats the maximum devices supported in Wireless Express solution?
    Ans – 2WLC + 6 APs each (or 12 APs and 2WLCs)

    Q4 – How many channels are available in 802.11a
    Ans – 28 (23 in America and 19 in Europe)

    Q5- what is the default orientation of the antena degree in the floor plan of WCS
    Ans – 90º

    Q6 – Split MAC Design

    – transmit beacons – AP
    – client authentication – WLC
    – Encryption/decryption – AP
    – RF management – WLC
    – transmission and buffering of frames – AP
    – 802.11 association and re-association – WLC

    Note: This is bit confusing because according to Todd Lamle and Micheal J Shanon Cisco Guide, RF Monitoring is done by AP but according to RRM feature of WLC does this job. So you can have your own assumptions on it.

    This question are abosultely correct from my best of knowledgement by reading two different book and from cico press website…so anyone has any openions, please share.

    Thanks

    Roomi

  28. WSL
    May 4th, 2012

    @ RoOmi

    add these too:

    1.-. Difference in indoor and outdoor mesh:
    R: licensed bands for outdoor mesh.

    2.- Select two option that describe bridges:
    R1: WGB conect multiple clients to ethernet and and appear as single connected device to cisco AP cisco.
    R2: Universal workgroup bridges (uWGB) connect multiple client to ethernet and appear as single connected device to no AP cisco.

    3.- How does direct spread spectrum achieve more data capacity than OFDM:
    R: Increasing Amplitude

    4.- What band is affected more by multipath of solid objects:
    R: 2.4 GHZ

    and I’m looking for answer for this Q.( What are the three types of alarm in WLC)

  29. RoOmi
    May 4th, 2012

    @WSL

    thanks for this…

    There are three types of Alaram in WLC

    1. Critical ( Red color)
    2. Major ( Orange Color)
    3. Minor ( Yellow Color )

    I have an exam tomorrow…when is yours?

  30. RoOmi
    May 4th, 2012

    sorry these alarms are on the WCS not on WLC….but not sure if the question was asked in WCS or in WLC

  31. WSL
    May 4th, 2012

    @ RoOmi

    maybe WCS not WLC i’m not sure ..

    i will do my exam in the 6th of may, after you by one day :)

  32. RoOmi
    May 4th, 2012

    dont worry I will update you dude once i m done with it …spending alot of time reading a book …i dont belive on dumps…

  33. WSL
    May 5th, 2012

    @ RoOmi

    i agree we need the book then the dumps …

  34. RoOmi
    May 5th, 2012

    To All and WSL…

    I passed the exam today wit 989/1000……which should mean I have only one answer correct and I know what that would be…..Todd Lamle has got couple of answer wrong in his book, so please follow these answer including the one I had new ones…

    New Questions are mentioned as above…

    1. how many channels are available in 802.11a
    A. 28

    2. How you differentiate the outdoor mesh to indoor mesh
    A. Licensed RF frequencies

    3. Three types of alaram in WSC dashboard.
    A. Major, Minor and Critical

    4. How many Rougue APs can be contained by an AP on Wireless LAN Controllers?
    A. 3 rogue APs per single AP

    5. Whats the maximum devices supported in Wireless Express solution?
    A. 2WLC + 6 APs each (or 12 APs and 2WLCs)

    These answer are 100% correct…becasue I had 100% in all these sections…

    The contracdictory Answer for the queston….

    1. Decribe Fading
    A. Time-varrying change…………………as mentioned in this website…do not follow Mr. lamle…becasue he is some sort of the prick who mentioned the wrong answer.

    2. Primary configuration method for cisco mobilty express
    A. Cli, Gui, and CCA…………………do not answer Gui and CCA becasue I had proven this from two different books and from cisco press. even in this website is mentioned wrong.

    3. Wlan using TKIP and AES
    A. Some wlan clients will not be able to connect becasue of complexity…..do not answer that it is a normal configuration and that is bloody question where I would be definetly wrong…because I made the other choice becasue of Mr. lamle…such a useless writter.

    Besides, I have all the question from bawldeeps dump….and only one DnD which was about Interface of WLCs. as mentioned in the dumps and in this website….

    Best of luck all of you …this exam is not as hard as I tought about it..

    Best Regards,

    RoOmi

  35. WSL
    May 6th, 2012

    Passed with 989 … valid dump + the new questions from RoOmi :)

  36. Anonymous
    May 6th, 2012

    @ dear roomi & WSL
    please send me the link for valid dumps i have to clear my exam before july. please guide me

  37. RoOmi
    May 6th, 2012

    congrates WSL…@Anonymous….you cant go with the one we have done it becasue the course has been changed now and its not available yet…but you can still get the dumps on exam collection website….the code for the new ccna wireless is 640-722. here is the link
    http://www.examcollection.com/640-722.html

  38. Maverick
    May 7th, 2012

    Can anyone give the reference for the following questions on a website or Todd Lamle guide

    Q1 How you differentiate the outdoor mesh to indoor mesh

    Q2 How does direct spread spectrum achieve more data capacity than OFDM

    Q3 What band is affected more by multipath of solid objects:

  39. Maverick
    May 7th, 2012

    Kindly point me to the reference of the detailed explanation of the answers to the questions above. Appreciate an urgent reply.

  40. laltu
    May 7th, 2012

    @All

    Is the answer 100% correct ? (the first one) http://wirelesstut.com/ccwireless-iuwne-640-721/drag-and-drop. Pls. help as I am going to attend the exam before it expires

  41. RoOmi
    May 7th, 2012

    @laltu…yeah dats absolutely correct..

  42. RoOmi
    May 7th, 2012

    @marvick …..I cant give you the reference at the moment…but being an wireless engineer..I can provide this knowledge based on my experience and going through some other articles outside the book…in addition….I have full marks in all these sections which could be a best proof for you…

  43. CCNA!
    May 9th, 2012

    @Roomi
    2. Primary configuration method for cisco mobilty express
    A. Cli, Gui, and CCA…………………do not answer Gui and CCA becasue I had proven this from two different books and from cisco press. even in this website is mentioned wrong.

    http://www.cisco.com/en/US/prod/collateral/wireless/ps7306/ps7319/ps7338/prod_qas0900aecd8060c860.pdf

    Q. Can the Cisco IOS® command-line interface (CLI) be used to manage the Cisco Mobility
    Express Solution?
    A. Because the objective of the Cisco SBCS was to create a simplified management system and
    interface for SMB customers, the CLI is limited to troubleshooting (SHO/DEBUG) commands
    only and cannot be used for configuration.

  44. RoOmi
    May 9th, 2012

    @CCNA…I think this will be my last post on this forum, becasue I had enough becasue I need to start concentrating on other stuff as well….well…can you please read the pages from 282 to 287 in Brandon James Cisco Guide book and also in Todd lamle Chapter 8, Lab question 1 and read its answer…that should clear your concept about it…Also…I suggest you to get some hands on Mobility Express…which definetly proves you weather you can make some initial configuration on these controller or not…hope this will help you and others…

  45. RoOmi
    May 9th, 2012

    sorry by the way I have got 100% on this section, so cisco cant be wrong either….

  46. Affan
    May 10th, 2012

    @ Roomi
    You were right boss i got 1000/1000 marks.

    Thanks TUT.

    Any one here and guide me about CCNA service Provider ?

  47. TomTicom
    May 11th, 2012

    Prüfung bestanden; Danke wirelesstut; Oh, ihr könnt kein deutsch…? Ach, das lernt ihr schon noch. ;-)

  48. Brian
    May 11th, 2012

    Passed today, 1000/1000. I can’t thank this community enough. I’ll be looking back for future exams. God Bless

  49. Wireless engineer
    May 11th, 2012

    Passed today with 1000%, has about 15 new questions from the new WCS 7.0 over all it was easy since I have being working as a wireless Engineer for an enterprise network but for those studying for the 640-722 pay attention what Monitor, configure and Administration does in the wireless controller GUI interface and also tools menus.
    Thank you wirelesstut.
    CCNP Wireless here I come.

  50. 640-722
    May 15th, 2012

    Any Updates On the new exam , Exam questions or study materials ?


  51. Note: Please do not open any suspicious links (especially short links and links that need to remove some words to open) in the comment section above as they are usually spams and may harm your computer.
Comment pages
1 4 5 6 7 8 10 841


CAPTCHA Image
Reload Image