Share your WIDESIGN Experience

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/Enterprise-Mobility-8-5-Design-Guide/Enterprise_Mobility_8-5_Deployment_Guide/wlanrf.pdf
See pages 3-14 and 3-15.

Passed today using it
ebay.to/2nR8a03
You can reply on it to pass the exam
Good luck everyone
Thank you Maria for your help

Thank you Celine

newguy
In my opinion answer is D, because we dont know types of clients near AP, and some of them would need 2.4, and if we turn off 2.4 on some AP, client with 2.4 will be not capable to connect.

garret
I still think it is a poorly worded/not enough info question that Cisco is famous for. I also made the mistake of not reading all the answers well. Do we both agree that A and B are wrong?

I still think C.
I think having some 2.4 GHz radios would work best if this is to be a high density deployment. The 2.4 radios will have a larger cell size than the 5GHz. The 5GHz radios need to be closer to provide adequate coverage in that band than the 2.4GHz radios.

For instance I can take 4 APs running 5GHz in a small space and not have the channels be anywhere near each other. But if I do the same with the 2.4 radios at least 2 will be on the same channel (assuming US operation of channels 1,6,11 for 2.4GHz). If you’re in a zone that allows a 4th channel then lets just increase the number of APs in that small space and I can still have 5 APs running 5GHz and still be on separate channels but not true for 2.4GHz.

Am I making sense? To explain it another way. You will need more 5GHz radios to cover the same space that will be covered by fewer 2.4GHz radios. So if you do it right the 2.4 clients/devices will still see the 2.4 radio

Look at figure 3-6 in here https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/Enterprise-Mobility-8-5-Design-Guide/Enterprise_Mobility_8-5_Deployment_Guide/wlanrf.pdf
See how the 2.4 signal will travel further than the 5GHz. Looking at jsut the yellow/green area shown in each of those figures. How many of the 2.4 ones would it take to fill up that space as compared to the 5Ghz ones.

Ok. now i agree with you.
Next one.
A network installation on the site with ID 331372269 has been determined to be potentially hazardous to install. Which regulatory body must be consulted to ensure safety during the installation?
A. FCC
B. HIPPA
C. PCI
D. OSHA
Answer: A
I think its D

I passed the exam today (990/1000) using Maria’s dumps

ebay.to/2nR8a03

Thank you so much Maria

Cool. And yes I agree it should be D- OSHA, especially since there is no specific nature to this hazardous situation.

Im not sure how many legit people are here vs. Scammers selling junk. For those who dont know, OSHA = Occupational Safety and Health Administration. OSHA’s mission is to “assure safe and healthy working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance

They look like scrammers ), but Robert Andreu has given real link) But I doubt that its good link

Hello Guys
I passed the exam this morning 945/1000
I revised the dumps already posted by Maria
ebay.to/2nR8a03
You can rely on these dumps to pass the exam
Good luck

newguy
Its from CUWSS 642-732 guide about question network engineer is designing a high-density wireless network. To optimize client performance and avoid interference. Which configuration must the engineer use?
If you use omnidirectional antennas, set the AP mode to Diversity, both on the 2.4-GHz and the
5-GHz bands. Make sure to use Cisco antennas on your APs. Use dual-radio APs. Set the cell edge at –67 dBm for
VoWLAN coverage, and reduce the power level on the 2.4-GHz radio to cover that same physical area as with the 5-GHz radio.

So that would seem to indicate the answer would be D then. I won’t argue agqinst that solution but I don’t fully agree because I still think you open yourself to co channel interference. The environments Ive been working in strictly use 5GHz because we dont want to deal with all the noise in the 2.4 band.

I think this guide might be usefull to preparing.
Cisco always has his own opinion for all topics)

But yes, not all questions are clear, und depend on situation

This is cool though I wish more would get involved with this discussion.

Hello
I passed today the exam using the dumps posted by Maria on the comment above
ebay.to/2nR8a03
The VCE test simulator is awesome
Thank you so much Maria for these dumps

Hey garret. Yeah those seem right. Another poorly worded question from Cisco though.

Hello
I passed the exam today using the dumps posted by Maria above
ebay.to/2nR8a03
The VCE Test Simulator is the same as the exam

Valid ! Passed too
ebay.to/2nR8a03
Score : 985

I hope I can help you, it is the premium version of the last exam, they report if they find new questions.
Good luck for all of you.

htt ps:/ /meg a.nz /#!N UhQR IpJ

Password: !iAo4 1P Mu NW1 6F duEgoUfl4 8tx 6iP9 x0NiFN8HdN6BY8

Thanks, your the best!!

Yes i confirm that this dumps is valid
ebay.to/2nR8a03

Passed too using ebay dump

A wireless engineer is hired to design a network for six buildings with a WLC in each building to
support the access points. Which type of wireless architecture is being used?
A. distributed deployment
B. autonomous deployment
C. unified deployment
D. centralized deployment

D????

Yeah I would lean towards D. Each building is centralized right? One controller per building. I suppose an argument could be made for A, but again question is short on details…

Passed too using it Alexander
Thanks so much
Score : 985
Time spent : 40 min

Passed too using ebay dumps

Yes Newguy, D

Passed too using it
ebay.to/2nR8a03
thanks God

Guys, all the dumps provided on ebay and google drives (from Maria,etc.) are not efficient so ignore all those users.
On the last week there were 60 questions and about 50% were the new one plus some known questions were changed. Even passleader demo did not show up any of the new questions.
So I recommend you to read the book (if you have the source) or check Cisco materials recommended on the cisco web even it is not so good structured.

Passed too (985/1000)
I used those dumps
ebay.to/2nR8a03
Thanks God

Dear Dovev Peleg,
Thank you very much for your Good Heart.
I am really appreciate you!

Thank you Maria, i passed the exam this morning by using the dumps posted by Maria on the comment above
ebay.to/2nR8a03
Thanks God
Score : 975/1000
Time spent : 40 min

Hello,
I passed the exam this morning (995/1000)
I have revised the dumps posted by Maria on the comment above (PDF + VCE)
ebay.to/2nR8a03
The VCE Test Simulator is the same as the exam
All the questions were from those dumps
Good luck
Aria

Thank you Aria
The VCE Test Simulator is awesome

Hello!
Could someone share for me latest 300-365 Dump?
I have plan to take that Exam on end of Nov.
Please help me!

Thaaaaaaaanks Aria
I passed today using your dumps
I can confirm that they still valid
Thank you for your help and for everything !!

A network engineer is retrofitting an existing building wired with category 5e with AP 3800 and mGig switches. Wich cable length do the operation?

– 70 m
– 120 m
– 130 m
– 150

Thanks Aria
Awesome dumps
You can rely on them to pass the exam
All Questions were from these dumps

Hello All
I passed the exam today (995/1000) using the dumps posted by Aria on this page
ebay.to/2nR8a03
– Labs were the same
– The Questions and D&D were the same as well
You can rely on these dumps to pass the exam with a good mark
Thanks God, Thank you Aria for your help
Regards

Thank you so much Elsie
I passed today too (score : 985)
I can confirm that this dumps is 95% valid and stable
Thaaanks God
Next 300-365 exam

Awesome dumps ! ebay.to/2nR8a03

Thanks for those dumps Zoe

Passed (990/1000) !

Here is the latest dumps posted by Zoe on the comments above (October 2018 Updates)

ebay.to/2nR8a03

PDF + VCE Test Simulator

The Test Simulator is like the real exam

Regards

Thank you Modir

Awesome materials

hello

PASSED (995/1000)

PDF + VCE Test Simulator

ebay.to/2nR8a03

(Updated on October 2018)

I hope these help you out. Please look into it and work with them

Good luck

Awesome Dumps (PDF + VCE Simulator)

Passed yesterday (995/1000)

ebay.to/2nR8a03

(October 2018 Updates)

Questions, Drag and drop, Labs were the same

Good luck