Share your IUWVN Experience

I suggest Dumps4download is the best site for prepare your exam. They provide latest and actual Cisco 642-742 dumps pdf question and answers. For more info: http://www.dumps4download.com/642-742-dumps.html

I just failed my 300-365. There were 53 questions most of them were different than the dumps.

I regret that you keep being rude, Wire-less.

Now, to all community, I suggest you to browse this link and download a file with screenshots of new questions:

http://certcollection.org/forum/topic/290085-300-208-232q-pl-dump/page__st__224

Cheers

all avaible dumps for 300-365 are not valid.
and also passleader dump has a lot of WRONG answer.

FCS32 Don’t feed the trolls, just ignore their negativity.
It looks like the link you posted is to a forum for 300-208 which is a security exam, not 300-365.

Yup, and maybe you’ll call trolls people finding out you don’t know shit when they’ll ask you questions at a technical interview !
This is beyond being irresponsible to provide people with cheating materials which by the way can get you revoked of all your certification and banned from Cisco’s certification program for life !
Spending all the $$$ to “earn” a certification for which you’re unable to accomplish tasks ? Isn’t that a waste of money ? Then people wonder why recruiters are now looking for CCIE, because whenever they get CCNA/CCNP onboard for a technical interview they find out they don’t even knows the basics…
This only has to do with logic, there is no trolling when it comes to cheating your way into exams, that tells everything about “how far” your thinking process is going… Seriously, what is the purpose of becoming CCNP if you don’t know your stuffs ? Spending the money to go get a job you won’t be able to accomplish ? There are plenty of people using braindump and yet being kicked in the face at a job interview or in the field for not knowing the basics, then they simply wish to be wiser and actually studied their stuff … THAT is the reality !

Q AP 3600 with AC module observed high channel utilization. Configuring a RX-SOP policy the behavior is the same:
3rd RF pluggable module in 3600 (802.11ac) does not support RX-SOP policy

Q Which certificate is needed to support locally switch WLAN on Cisco AP Flexconnect for local certificate based EAP authentication?
Download vendor certificate to WLC (Note: WLC will then push it to AP)

Q CAPWAP UDP ports:
CTL 5246
Data 5247

Q Flexconnect ACLs roaming client between APs in different Flexconnect groups are the ACLs in the new AP. ACLs in AP Flexconnect group 1: In FLEXACL / out FLEXACL. ACLs in AP Flexconnect group 2: In FLEXACLIN / out FLEXACL. The VLAN 100 is the same on both APs / Flexconnect groups.
Not sure: In FLEXACLIN / out FLEXACL.

Q AP 600 Office Extend WLAN connected user access to local printer
Split Tunneling

Q Settings and design to support secure Guest WLAN Mobility Anchor:
Firewall ACL permit ports UDP 16666 and Protocol 97 (Note: Mobility and EoIP)
Mobility group with a WLC mobility anchor in a Firewall secure network (DMZ)

Q The number of Guest WLAN clients create excessive load. Reduce load to save resources for HDX WLAN clients deployment.
Maximum allowed clients in Guest WLAN
Note: I guess this alternate option is not correct: QoS Bronze on Guest WLAN

Q mDNS client context attributes:
role
location
user-id

Q MESH indoor recommended maximum hop count for data traffic:
4

Q MSE calibration is not possible to, using the linear point collection:
RFID tags (only with Aeroscout proprietary engine installed in MSE)

Q MSE to CPI communication protocols:
HTTPS
SOAP

Q MSE installation script mandatory lease once parameters:
Hostname
Network interface

Q Multicast from network to any host address:
224.0.0.1
Note: I guess these alternate options are not correct: 224.0.1.1 (NTP address) 225.0.0.1 (N/D) 225.0.1.1 (N/D)

Q Cisco mDNS port
UDP 5353 port

Q Configure RX-SOP threshold value -82dBm in 802.11a:
CLI_command: config 802.11a rx-sop threshold -82
Note: I guess these alternate options are not correct: HIGH (-76 dBm) MEDIUM (-78 dBm) LOW (-80 dBm)

Q RX-SOP configured AP is rejecting clients on 802.11a band with RSSI of -77 dBm. Reason:
High (-76 dBm) option is configured

Q Which social connector can be used to collect demographics from users in CMX:
Facebook
Note: I guess these alternate options are not correct: G+, Google and Myspace.

Q Workgroup Bridge connection to WLC LWAP – mandatory parameter configuration:
Aironet IE

Q Workgroup Bridge security feature not supported in competitor WGB.
Not sure: MAC filtering
Features NOT supported with a WGB:
– Idle timeout
– Web authentication
Features NOT supported for wired clients connected to WGB:
– MAC filtering
– Host visibility

Q Sporting venue clients are not associating to the nearest AP. Which feature will reduce AP visibility of channel utilization?
RX-SOP

Q Netflow architecture components:
Collector
Exporter

Q WLAN Netflow configuration
The screenshot shows a WLAN >QoS tab and a monitor list with a monitor configured without Name (None), IP address (0.0.0.0) and Port (0).
Create an exporter
Associate the exporter to a Monitor (it’s already created)
Associate the Monitor to the WLAN
Note: I guess this alternate option is not correct: Add WLC IP address to the exporter

Q Which IEEE standard completes client handshake before roaming?
IEEE 802.11r

Q How is selected the Master AP for AP firmware download procedure?
For each model the AP with the lowest MAC address, per Flexconnect group

Q WLAN users are exhausting IP addresses of its VLAN. Which feature allows to extend WLAN address space?
Create a new interface, add it to a interface group and map it to the WLAN.

Q How is the MSE recovery password procedure?
Interrupt MSE boot and edit GRUB bootloader.

Q A deployment spreads across several different buildings with different construction (materials) and client density. Which technique allows a proper WLAN behavior for each of these RF environments?
Creating RF-profiles and associate them to AP groups.

Q Which configuration preserves QOS marking for a centrally-switched WLAN?
Trust CoS
Note: I guess these alternate options are not correct: Trust DSCP, Nothing needs to be done, It’s not possible.
Note 2: I guess the required configuration is to be made on switches connected to WLC and AP.

Q In a mesh network a premium of 20% is given to the selected parent. Which is the function of this feature?
To prevent flopping of the link.

Passleader
1 D B
2 C B WRONG?
3 D
4 B D
5 D A
6 C
7 D
8 LAB
N/A A
9 B
10 A
11 AE BD WRONG?
12 C A WRONG?
13 A D
14 B C
15 BDE
16 B
17 C
18 A
19 D B
20 BD AE
21 AC CG
22 D
23 C
24 DGCFBEA
25 DE BD IS WRONG
26 B
27 A D IS WRONG
28 A
29 ABEF ADEF
30 D
31 ABF ABE
32 D C WRONG?
33 D
34 DE AD IS WRONG
35 A C
36 ADG
37 DE
38 B
39 BC CD WRONG?
40 B A
41 A
42 D B
43 BD
44 CD AB WRONG?
45 A C
46 CD CE
47 B
48 B
49 A
50 CDG ADE IS WRONG
51 A SAME Q7
52 BC
53 A D
54 C B
55 B
56 B
57 LAB DFGH
58 BE
59 B C
60 B
61 BE AC WRONG?
62 CE DE IS WRONG

Hi Wireless: agree with you completely.
Hi all: Posted my suggestions for PassLeader dump corrections and supposed new QAs I’ve found.
Waiting for your comments.

Hi community: Please ignore the my correction grid I’ve posted since it’s not the correct one.

I’ll post ASAP my up to date correction grid for PL 300-365 70Q (although I’ve not yet corrected the last 9 questions), that includes, for each question 3 columns: first: my suggested answer, second: the PassLeader provided answer when different from my answer and third: my comment when both answers differ.

Now, my correct up-to-date PassLeader 300-365 70Q (no correction from Q62 onwards) correction grid:

1 B CORRECT
2 C A WRONG
3 B CORRECT
4 AB AE WRONG
5 CG CORRECT
6 DGCFBEA CORRECT
7 D CORRECT
8 C CORRECT
9 DE BD WRONG
10 B CORRECT
11 D CORRECT
12 A CORRECT
13 ADEF CORRECT
14 D CORRECT
15 ABF ABE WRONG
16 D C WRONG
17 D CORRECT
18 D B WRONG
19 BD DE WRONG
20 BD AB WRONG
21 C CORRECT
22 CE CORRECT
23 B CORRECT
24 B CORRECT
25 A CORRECT
26 BCG ABE WRONG
27 D CORRECT
27 A CORRECT
28 BC CORRECT
29 D CORRECT
30 B CORRECT
31 B CORRECT
32 B CORRECT
33 ACFG/FH/GH DFGH WRONG.
34 BE CORRECT
35 C CORRECT
36 B CORRECT
37 AB AC MAYBE WRONG
38 B CORRECT
39 C B WRONG
40 D MAYBE CORRECT
41 D CORRECT
42 A CORRECT
43 C CORRECT
44 LAB N/A
45 B A WRONG
46 DE AD WRONG
46 CE DE WRONG
47 C CORRECT
48 ADG MAYBE CORRECT
49 DE CORRECT
50 B CORRECT
51 CD CORRECT
52 A CORRECT
53 A CORRECT
54 A CORRECT
55 AE BD MAYBE WRONG
56 C A WRONG
57 C D WRONG
58 C CORRECT
59 BDE CORRECT
60 B CORRECT
61 C CORRECT

Hi community: I hope that with the updated PL correction grid I’ve just posted for your comments, plus the 29 supposed new questions and your comments about the last 9 questions of PL dump I still don’t have, we can succeed to be prepared to take and pass this exam. Cheers.

Hi CRC32,
thank you very much for the comments. Could you share a download link for the 70Q?

QUESTION 1
What devices can be tracked with the Cisco Context Aware Services?
A. Only wired devices.
B. Both wired and wireless devices.
C. Only Cisco certified wireless devices.
D. Only wireless devices.
Answer: B
QUESTION 2
After implementing mDNS gateway, a school’s network administrator notices that mDNS wireless
printers are available over the whole network. Which feature can the admin use to restrict the
printer mDNS advertisements to the AP that the printer is joined to and adjacent APs?
A. mDNS-AP
B. SSO
C. LSS
D. Priority MAC
Answer: A
QUESTION 3
A network engineer has installed 802.11ac access points with 80 MHz enabled; however, in the
conference rooms, co-channel interference is being noticed. Under which tab in the RF profiles
configuration can the engineer find the settings to tune the channel width for a group of APs?
A. 802.11
B. RRM
C. High Density
D. General
Answer: B
QUESTION 4
A customer has “quiet” wireless clients that use static IP addresses.
Which two WLAN configurations are required for these wireless clients to connect properly?
(Choose two.)
A. Disable DHCP address assignment required.
B. Enable passive client.
C. Disable allow AAA override.
D. Enable static IP tunneling.
E. Disable DHCP server override.
Answer: AE
QUESTION 5
An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server.
Which two options override the interface group configuration on the SSID? (Choose two.)
A. static VLAN on client
B. ACL
C. AP group
D. static IP on client
E. MAC filtering
F. RF group
G. AAA override
Answer: CG
QUESTION 6
Drag and Drop Question
Drag the QoS values from the left and drop them in the correct descending order of priority on the
right.
Answer:
D CS6 (110 00 0 = 48)
G EF (101 11 0 = 46)
C CS4 (100 00 0 = 32)
F AF31 (011 01 0 = 26)
B CS3 (011 00 0 = 24)
E AF11 (001 01 0 = 10)
A CS1 (001 00 0 = 8)

QUESTION 7
A customer requires that the remote site be able to utilize local servers when the AP is in WAN-
down (standalone mode). Which AP mode must be configured on the wireless controller?
A. SE-Connect
B. Monitor
C. Local
D. FlexConnect
E. Sniffer
F. Rogue Detector
Answer: D
QUESTION 8
A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC
and is experiencing excessive channel utilization regardless of occupancy.
Which action reduces channel utilization without removing SSIDs?
A. Disable MCS data rates 0 through 11.
B. Disable MCS data rates used by 40 MHz channels.
C. Disable data rates that use CCK.
D. Disable VHT data rates.
Answer: C
QUESTION 9
CMX Facebook WiFi can allow access to the network before authentication. Which two of the following options are available? (Choose two)
A. Allow all the traffic before authentication and intercept HTTPs only.
B. Allow HTTP traffic only before authentication and block all the traffic.
C. Allow SNMP traffic only before authentication and block all the traffic.
D. Allow all the traffic before authentication and intercept HTTP only.
E. Allow HTTPs traffic only before authentication and block all other traffic.
Answer: BD
QUESTION 10
You have set up FlexConnect APs. For which scenario is Fast Roaming supported, providing the
WLAN is mapped to the same VLAN and the client is roaming to an AP on the same Cisco WLC?
A. central switching with PMK (OKC) between different FlexConnect groups
B. local switching with Cisco Centralized Key Management within the same FlexConnect group
C. central switching with Cisco Centralized Key Management between different FlexConnect groups
D. local switching with PMKID within the same FlexConnect group
Answer: B
QUESTION 11
What address do PIM routers listen to in order to automatically discover the best RP for each
multicast group?
A. 224.0.0.13
B. 224.0.1.39
C. 224.0.0.14
D. 224.0.140
Answer: D

QUESTION 22
When a Vocera badge performs a broadcast call in a properly configured VoWLAN using WLC
v7.0, which two choices indicate how the QoS is marked? (Choose two.)
A. Upstream marked as Best Effort.
B. Upstream marked as ToS CS4.
C. Upstream marked as DSCP EF.
D. Downstream marked as DSCP EF.
E. Downstream marked as Best Effort.
F. Downstream marked as Silver.
Answer: CE
QUESTION 23
A network engineer is debugging issues with the mDNS gateway. Which type of reply should be
seen in the Wireshark capture when querying for a mDNS service in the Bonjour Cache?
A. unicast from Prime Infrastructure
B. unicast from controller
C. multicast from devices
D. multicast from controller
E. unicast from devices
F. multicast from Prime Infrastructure
Answer: B
QUESTION 24
An engineer would like to capture NetFlowdata on PI. Which resource is required to allow this?
A. Cisco MSE as NetFlow exporter
B. Prime Infrastructure 1.0 or later
C. Cisco NAC as NetFlow exporter
D. Cisco ISE as NetFlow exporter
Answer: B
QUESTION 25
Which statement about when you configure FlexConnect APs and you want to set up Cisco
Centralized Key Management fast roaming is true?
A. FlexConnect groups are required for Cisco Centralized Key Management fast roaming to work
with FlexConnect access points.
B. APs that are in the same FlexConnect group but associated to different WLCs support Cisco
Centralized Key Management.
C. Cisco Centralized Key Management fast roaming among FlexConnect and non- FlexConnect
access points is supported.
D. The FlexConnect access point must be in standalone mode to support Cisco Centralized Key
Management.
Answer: A
QUESTION 26
Refer to Exhibit.
A wireless client is connecting to FlexAPI which is currently working standalone mode.
The AAA authentication process is returning the following AVPs:
Tunnel-Private-Group-ld(81): 15
Tunnel-Medium-Type(65):IEEE-802(6)
Tunnel-Type(64): VLAN(13)
Which three behaviors will the client experience? (Choose three.)
A. While the AP is in standalone mode, the client will be placed in VLAN 15.
B. While the AP is in standalone mode, the client will be placed in VLAN 10.
C. When the AP transitions to connected mode, the client will be de-authenticated.
D. While the AP is in standalone mode, the client will be placed in VLAN 13.
E. When the AP is in connected mode, the client will be placed in VLAN 13.
F. When the AP transitions to connected mode the client will remain associated.
G. When the AP is in connected mode, the client will be placed in VLAN 15.
H. When the AP is in connected mode, the client will be placed in VLAN 10.
Answer: ADE
QUESTION 27
The customer has deployed C7960 phones with clients connected to them.
What switch feature could be enabled to distinguish IP voice traffic from client data traffic?
A. VoiceVLAN
B. QoS routing
C. WME
D. Weighted Queuing
E. QBSS
Answer: A
QUESTION 28
An engineer wants to configure Call Admission Control and ensure that AC is based on the
capacity of the AP and considering the possible impact of other APs in the area.
Which two configuration options are required? (Choose two.)
A. StaticCAC
B. Admission Control
C. Load-Based AC
D. Add Traffic Stream
E. Reserved Roaming Bandwidth
F. Expedited Bandwidth
Answer: BC
QUESTION 29
A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs
outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is
leveraged, but no FlexConnect Master AP has been configured.
How many image transfers between the WLC and APs will occur?
A. 7
B. 1
C. 5
D. 2
Answer: D
QUESTION 30
What is the default NMSP echo interval between a Mobility Services Engine and Wireless LAN
Controller?
A. 30Seconds
B. 15 Seconds
C. 10 Seconds
D. 60 Seconds
Answer: B
QUESTION 31
Which show command will show whether a WLAN is locally or centrally switched on a Cisco
Wireless Lan Controller?
A. show ap config general Cisco_AP
B. show wlan wlan_id
C. show flexconnect summary
D. show flexconnect group detail

Answer: B
QUESTION 32
You have a VoWLAN configured for platinum QoS, WMM, and CAC. IP phones for this VoWLAN
include the Nokia and Cisco Unified Wireless IP Phones 7920G (pre-v2.0 firmware), 7921G, and
7925G. The Wireless IP Phones 7921G and 7925G work properly, but the Nokia and the
Wireless IP Phones 7920G associate with the WLAN but cannot place calls. What is the issue?
A. The lowest mandatory speed in the WLAN is too high and needs to be reduced.
B. The Cisco Unified Wireless IP Phones 7920G and Nokia IP phones do not support TSPEC.
C. EDCA needs to be enabled on the WLAN.
D. HCCA needs to be enabled on the WLAN.
E. The reserved roaming bandwidth setting is set too low.
F. The expedited bandwidth setting needs to be enabled.
Answer: B
QUESTION 33
Scenario
There is a problem with the East-WLC-2504A. When configuration changes are made to the
Employees-East-Wing AP Group that covers the East-Wing, none of the APs receive the
updates. Refer to the exhibits to determine where the problems are.
What needs to be changed in the configuration of the East-WLC-2504A controller to restore
functionality to the Employees-East-Wing AP Group? (Choose four.)
A. Change the AP in the Employees-East-Wing AP Group.
B. Change the IP Address in the east-wing interface.
C. Change the VLAN Identifier in the east-wing interface.
D. Enable Dynamic AP Management in the east-wing interface.
E. Change the Port Number to 2 in the east-wing interface.
F. Add the Primary Controller and IP address to the 3700-East-Wing AP.
G. Change the SSID in the Employees-East-Wing AP Group.
H. Change the Interface/Interface Group In the Employees-East-Wing AP Group.
Answer: DF
QUESTION 34
A network engineer must ensure that corporate wireless users have a better experience than
guest wireless users. Which two configurations fulfil requirement? (Choose two.)
A. Override per-SSID bandwidth contracts on the corporate WLAN to reserve bandwidth.
B. Modify the corporate WLAN to the Platinum QoS policy.
C. Enable 802.1ptag on the Gold QoS pofccyto honor prioritized traffic.
D. Adjust the guest WLAN radio policy to 80211 b/g only.
E. Change the guest WLAN to the Bronze QoS policy.
Answer: BE
QUESTION 35
A customer requires wireless traffic from the branch to be routed through the firewall at corporate
headquarters. There is a RADIUS server in each branch location. Which FlexConnect state
should be used in this scenario?
A. local authentication and local switching
B. local authentication and central switching
C. central authentication and central switching
D. central authentication and local switching
Answer: C
QUESTION 36
Which of the following is not a Cisco RF fingerprinting key advantage over Location Tracking?
A. Uses existing LWAPP-enabled Cisco Unified Networking components.
B. Proprietary client hardware or software is required.
C. Better accuracy and precision.
D. Reduced calibration effort.
Answer: B
QUESTION 37
A customer has implemented a N+1 high availability plan in a multistory building. All APs on odd
numbered floors are set as primary to WLC-A and all APs on even numbered floors are set as
primary to WLC-8. Which two problems are likely to arise from this design? (Choose two)
A. inconsistent CleanAir data due to multiple WLCs
B. floor-to-floor bleed-through that causes intercontroller roaming delays
C. AVC inconsistency due to multiple mobility group members
D. legacy device compatibility with multiple WLC configuration that causes disconnects
E. unpredictable AP loading during a WLC failure
Answer: AC
QUESTION 38
VoWLAN implementation plans for a current mix of existing Cisco Unified Wireless IP Phones
7920G and 7921G to a final migration of Wireless IP Phones 7925G in a single WLAN.
What would be the most appropriate WLC WLAN configuration to end with Wireless IP Phones
7925G?
A. 7920 Client CAC = enabled only; Radio Policy = All; WMM = Disabled
B. 7920 AP CAC = enabled only; Radio Policy = All; WMM = Allowed
C. 7920 Client CAC = enabled only; Radio Policy = 802.11a only; WMM = Disabled
D. 7920 AP CAC = enabled only; Radio Policy = 802.11a only; WMM = Allowed
E. 7920 Client CAC = enabled only; Radio Policy = 802.11b/g only; WMM = Disabled
F. 7920 AP CAC = enabled only; Radio Policy = 802.11b/g only; WMM = Allowed
Answer: B
QUESTION 39
After a wireless deployment, users report that wireless voice clients are experiencing an
unacceptable amount of delay while roaming during a call on the Cisco Unified 7925 Series phones. The customer environment consists of multiple controllers, all running 7.4.121.0 code,
operating in a centralized deployment.
What configuration issue is most likely contributing to the problem?
A. The authentication should be set to WPA2-PSK to allow for 802.11n speeds for the Cisco Unified
7925 phones.
B. The access points on that floor are all on one controller and should be load balanced evenly
across multiple controllers.
C. The access points for that floor are salt and peppered across multiple controllers and should be
moved to the primary controller.
D. The wireless phones are operating in the 2 4 GHz band and should be configured for the 5 GHz
band.
Answer: B
QUESTION 40
A wireless engineer at a convention center has been asked to provision an SSID that can
accommodate 4,000 users during a conference.
Which interface group configuration should be used?
A. One interface with /20 mask
B. Two interfaces with /21 mask
C. Four interfaces with /22 mask
D. Eight interfaces with /23 mask
Answer: D

QUESTION 41
A customer is implementing a massively scaled guest wireless network to support approximately
32,000 clients. For ease of administration, they have required implementing multiple interfaces
defined on the WLC and mapped to a single interface group.
Which configuration meets this need?
A. 264 interfaces of/25 sized networks
B. 132 interfaces of/24 sized networks
C. 66 interfaces of/23 sized networks
D. 33 interfaces of /22 sized networks
Answer: D
QUESTION 42
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on
the WLAN. Which configuration is needed to complete this task?
A. Change the AVC application WebEx-app-sharing to mark
B. Create an ACL for WebEx.
C. Change the WLAN reserved bandwidth for WebEx.
D. Create an AVC profile for WebEx marked with a lower DSCP value
Answer: A
QUESTION 43
A network engineer is configuring QoS and sees a DSCP value of 40. To which CoS value will
this be mapped?
A. 4
B. 3
C. 5
D. 2
E. 1
Answer: C
QUESTION 44
Scenario
One of your colleagues has setup a test network in the lab to simulate a new building atone of
your regional offices. Your team is testing AP failover. Your colleague has requested you to
configure the WLCs so that in the event of a loss of one of the WLCsthe other wings APs will fail
over to the remaining WLC.
The APs on the East-WLC-2504A should fail over to the West-WLC2-2504A, and the APs on the
West-WLC2-2504A should fail over to the East-WLC-2504A.
Set the priority of the APs so the backup controller recognizes the join request from the higher-
priority AP and if necessary disassociates a lower-priority AP to provide access to an available
port.
Not all menus, tabs and features are supported.
Topology
Answer: Pending
QUESTION 45
A WLAN engineer has been asked to upgrade the software on a MSE 3365 Appliance.
The engineer cannot access the system using the root password and the Grub password as the
details had never been documented. How should the engineer perform the password recovery?
A. Use a console cable.
B. Contact Cisco TAC and arrange an RMA of the MSE.
C. Boot the MSE using the software installation DVD.
D. The Password can be reset using Prime Infrastructure.
Answer: A
QUESTION 46
A wireless engineer wants to enable optimized roaming for their 5GHz wireless network with
these settings: -72dBm RSSI value, 25% coverage exception level percentage, and a minimum of
50 packets received.
Which two commands achieve these settings? (Choose two.)
A. config advanced 802.11a coverage data fail-percentage 25
B. config advanced 802.11b optimized-roaming enable
C. config advanced 802.11b coverage data rssi-threshold -72
D. config advanced 802.11a optimized-roaming enable
E. config advanced 802.11a coverage data rssi-threshold -72
Answer: AD
QUESTION 47
A network engineer for a college dormitory notices that student devices are filling up the SP-DB
and are not allowing the shared wireless printers to be discovered.
Which feature can be used to reserve space in the SP-DB for the printers?
A. mDNS-AP
B. LSS
C. Priority MAC
D. sso
Answer: C
QUESTION 48
You are deploying a combination of Cisco Unified Wireless IP Phones 7921G and 7925G at your
branch offices in a centralized call processing environment that requires high availability at
branch locations. Which three components need to be verified before the wireless IP phones can
be deployed? (Choose three.)
A. Sufficient SRST license support at each branch location
B. Support for local voice mail
C. Branch gateways support MoH
D. Properly configured QoS over the IP WAN links
E. Support for single number reach
F. Support for E.164 dialing
G. Sufficient IP phone licenses in the Cisco Unified Communications Manager cluster
Answer: ADG
QUESTION 49
A network engineer is viewing the QBSS information in a packet sniff. Which two QBSS
characteristics are crucial for successful troubleshooting? (Choose two.)
A. When only WMM is enabled, information element number 1 QBSS Load information element is
sent out in the beacons and probe responses.
B. When only WMM is enabled, information element number 3 QBSS Load information element is
sent out in the beacons and probe responses.
C. When the client CAC limit is supported, information element number 2 is sent out in the beacons
and probe responses on the bg radios.
D. When the client CAC limit is supported, information element number 1 is sent out in the beacons
and probe responses on the bg radios.
E. When only WMM is enabled, information element number 2 QBSS Load information element is
sent out in the beacons and probe responses.
Answer: DE

QUESTION 50
A network engineer must configure a 5 GHz network to allow for the greatest density of radios
possible with the least amount of co-channel interference. Which configuration best fulfills this
requirement?
A. Set 802.11 h Local Power constraint to 25 dBm.
B. Set DCA to 20 MHz channels and enable Extended UNII-2 channels.
C. Enable Event Driven RRM in 5 GHz with a sensitivity of High, n
D. Configure TPC Power Threshold to -80 dBm and set interference Optimal Mode (TPCv2).
Answer: B
QUESTION 51
Refer to Exhibit. What two items need to be supported on the VoWLAN phones in order to take
full advantage of this WLAN configuration? (Choose two.)
A. APSD
B. 802.11a
C. 802.11e
D. WMM
E. 802.11r
F. SIFS
Answer: CD
QUESTION 52
What is the best practice for setting the WLC v7.0 use of WLAN QoS settings to support SIP
phones on a VoWLAN?
A. Configure SIP with static CAC only with SIP call snooping.
B. Configure SIP with static CAC only without SIP call snooping.
C. Configure SIP with load-based CAC only with SIP call snooping.
D. Configure SIP with load-based CAC only without SIP call snooping.
E. Configure SIP with load-based CAC and TSPEC only with SIP call snooping.
Answer: A
QUESTION 53
A corporation has a Cisco Unified Wireless Network that has been deployed for voice coverage.
The wireless data rates have been tuned to mandatory rates of 18 Mbps and 36 Mbps. Some
wireless clients have been experiencing drops streaming multicast video while moving throughout the building. What is the cause of the drop in video?
A. Clients are roaming at lower data rates and are not maintaining 36Mbps connectivity.
B. Clients are not roaming due to coverage. This is causing the multicast data to drop due to the
client re-associating often.
C. Clients are connected at 18Mbps; however, other clients are connecting at 12Mbps and are
causing the multicast video to degrade.
D. Clients are maintaining a 12Mbps rate and cannot receive the stream at 18Mbps.
Answer: A
QUESTION 54
Which network is connected by default when connecting to the unused Ethernet port of a MAP?
A. the native VLAN that the MAP is connected to
B. the VLAN that is associated with WLAN number 1 in the WLC
C. the native VLAN that the WLC is connected to
D. the VLAN that is associated with the SSID that the MAPs are communicating on
Answer: A
QUESTION 55
What are two functions of the RAP in a mesh network? (Choose two.)
A. It provides a wired connection for the wireless mesh APs.
B. It adds capacity and resilience to a mesh area.
C. it creates a centralized management location for the mesh network.
D. it reduces the hop count to the wireless network that is connected to the edge.
E. it routes traffic from the wireless mesh to the wired network.
Answer: BD
QUESTION 56
A customer has limited staff to manage a wireless network. The customer wants a solution that
requires minimum hardware. Which type of architecture do you propose?
A. centralized
B. distributed
C. cloud-based
D. unified
Answer: A
QUESTION 57
A customer called into the support center with a problem ticket that involves wireless clients
having to reauthenticate when they are walking around their office. After further investigation, it
was discovered that the customer has two controllers in an N+1 deployment.
Which action must the engineer take to troubleshoot the issue?
A. Verify that the wireless controllers are in the same mobility group and that the access points are
all on the primary controller.
B. Under the SSID, make sure that 802.1 Iris configured and running for the clients.
C. Make sure that the SSID has the authentication set to 802.1x with Cisco Centralized Key
Management so the data clients can roam seamlessly.
D. Verify the access points are spread out between the primary and secondary controller and that
the controllers are in the same mobility group.
Answer: D
QUESTION 58
A customer has implemented a wireless network that requires tuning for High Density
applications utilizing the RX-SOP feature. They are experiencing a high noise floor (average of –
65 dBm) and expect that to decrease significantly. A sampling of radios determine that most
Access Points have neighbors on the same channel at a power level of -75 dBm.
Which value should the customer use to start tuning RX-SOP?
A. -60 dBm
B. -65dBm
C. -70 dBm
D. -75 dBm
E. -80 dBm
Answer: C
QUESTION 59
A client reports that video is not streaming. The administrator determines the client is connecting
at a data rate of 12 Mbps and is trying to stream to a valid multicast address on the network.
What three items should the administrator check next to troubleshoot the issue? (Choose three)
A. IGMP snooping is turned off because the client cannot request to join a group, only access points
can.
B. Video-stream for the multicast video is configured in the controller.
C. WLAN has been set for a QoS value of Platinum.
D. WLAN has been configured to allow multicast-direct to work correctly and multicast- direct has
been enabled globally.
E. WLAN has been set for a QoS value of Gold.
F. RTSP is used to stream the video due to wireless multicast not using acknowledgements.
Answer: BDE

QUESTION 60
On which AP radio or radios is Cisco WGB association supported?
A. 2.4 GHz only
B. 2.4 or 5 GHz only
C. 2.4, 5, or 4.9 GHz
D. 5 GHz only
Answer: B
QUESTION 61
A downstream packet containing a DSCP value arrives at the WLC Ethernet interface from the
wired source network. The WLC is configured for QoS WLAN 802.1p mapping.
How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the
respective AP and final wireless client destination?
A. No outer CAPWAP or inner QoS tagging is applied.
B. No outer CAPWAP QoS tag is applied, but the original DSCP is maintained inside CAPWAP.
C. The outer CAPWAP CoS is marked and capped while the inner DSCP maintains the original
marking.
D. The outer CAPWAP DHCP is marked and capped without any inner DSCP value.
Answer: C
QUESTION 62
Which three security features can be gained by installing a Cisco NAC Appliance into the
network? (Choose three.)
A. in-band or out-of-band deployment options
B. intrusion detection
C. bandwidth and traffic filtering controls
D. posture assessment
E. accurate identification, classification, and stopping of malicious traffic
F. detection and containment of rogue clients
Answer: ACD
QUESTION 63
Clients are failing EAP authentication. A debug shows that an EAPOL start is sent and the clients
are then de-authenticated. Which two issues can cause this problem? (Choose two.)
A. The WLC certificate has changed.
B. The WLAN is not configured for the correct EAP supplicant type.
C. The shared secret of the WLC and RADIUS server do not match.
D. The WLC has not been added to the RADIUS server as a client.
E. The clients are configured for machine authentication, but the RADIUS server is configured for
user authentication.
Answer: CD
QUESTION 64
An engineer has configured an anchor controller in the DMZ for guest traffic, but the traffic is
failing at the firewall. Which two ports must be opened on the firewall? (Choose two.)
A. IP protocol 43
B. IP protocol 97
C. TCP port 23
D. TCP port 443
E. UDP port 123
F. UDP port 16666
Answer: BF
QUESTION 65
An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which
option must be enabled to ensure that client devices can connect to the wireless, even when
WLC cannot communicate with the RADIUS?
A. local EAP
B. Cisco Centralized Key Management
C. authentication caching
D. pre-authentication
Answer: A
QUESTION 66
An engineer wants to configure guest access to redirect to a webpage and log in with provided
credentials. Which configuration option on the WLAN is selected?
A. authentication
B. passthrough
C. conditional web redirect
D. splash page web redirect
E. preauthentication ACL
Answer: A
QUESTION 67
An engineer is deploying a Cisco NAC appliance in a highly routed environment and requires it to
act as a DHCP server. What deployment model should be used?
A. Layer 3 Virtual Gateway OOB Real-IP Gateway
B. Layer 2 Virtual Gateway
C. Layer 2 Real IP
D. Layer 3 Real IP
Answer: A
QUESTION 68
Which feature should an engineer select to implement the use of VLAN tagging, QoS, and ACLs
to clients based on RADIUS attributes?
A. per-WLAN RADIUS source support
B. client profiling
C. AAA override
D. captive bypassing
E. identity-based networking
Answer: C
QUESTION 69
A client wants to put wireless users on different VLANs while using one SSID.
Which two methods accomplish this goal? (Choose two.)
A. Use ACS as the RADIUS server.
B. Configure aaa override on Cisco WLC WLAN.
C. Configure similar SSIDs with different VLANs.
D. Configure the same WLAN on ID 1 and 17.
E. Configure the Cisco WLC internal RADIUS server.
Answer: AB
QUESTION 70
An engineer must segment traffic into separate WLANs.
Which three factors should be used to determine traffic segmentation? (Choose three.)
A. QoS policy
B. subnet requirements
C. application requirements
D. security capabilities
E. access control policies for voice
F. enterprise resource planning
Answer: ACD

Hi Community:
I’ve just posted the original (without my suggested corrections) PL 300-365 70Q dump (without screenshots you may get from this link: https://drive.google.com/open?id=0B-ob6L_QjGLpR3dFYkJubjFZaDQ#sthash.A5Zqy1sJ.dpuf)

Please waiting your comments, especially about the last 9 questions of PL dump I have not (yet) corrected.

Thank you very much CRC32! … Do you have the material for the other exams as well? 360, 370, 375?

Hi CRC 32, did you pass the 300-360Exam?

@CRC 32, those dumps are the latest? or they are old? and the other question, the corrections you posted on February 28th, 2017 at 11:51 | #23, are those corrections the final and correct answers?. Thanks in advance.

From the PL 300-365 70Q @CRC you posted. Does it contains the correct answers or we must review what you published February 28th, 2017 at 11:51 | #2 3?

i guys, do you know any dumps’s webpage which be accurate with the answers?. Thanks

Hi CRC,
Q 68 is correct
AAA Override
Information About AAA Override
The AAA Override option of a WLAN enables you to configure the WLAN for identity networking. It enables you to apply VLAN tagging, Quality of Service (QoS), and Access Control Lists (ACLs) to individual clients based on the returned RADIUS attributes from the AAA server.

AAA Override for IPv6 ACLs

q64 is correct
Mobility communication between controllers occurs using their management interfaces, and uses the following protocols:

UDP 16,666 is used for Mobility control traffic between peers (Control Path)
IP Protocol 97 is used for Ethernet-in-IP traffic tunneling of client traffic (Data Path)

@Donald: no, no more 300-xxx materisls. this is the only new ccnp wireless exam I need to pass.

@Ronald V: please ignore my previous posts and consider only these I’ve posted yesterday and today:

29 new questions and answers.

Second correction grid for PL300-365 70 questions (although only 61 answers were corrected).

PL 309-365 70 questions with original answers (not corrected).

@LANMAN: many thanks for your valuable contribution.

I guess q62 and q67 are not related to this exam, but to a security exam instead.

@CRC to be clear, I just need to consider posts #26-33 and #41-42, right?

No Ronald. You need to consider a but more:

Post 19: 29 new questions and answers.
Post 23: Second correction grid for PL300-365 70 questions (although only 61 answers were corrected).
Posts 26-33: PL 309-365 70 questions with original answers (not corrected).
Posts 39-40: q64 and q68 corrections LANMAN kindly shared
Posts 41-42: my additional comments excluding q62 and q67

Note: definitely ignore post 20 since that correction grid is not correct.

Ok guys: now just waiting comments about questions 63,64,65,66,69 and 70 (and sny oyher since I’m not sure about several answers)!

Thank you @CRC32, question, in the correction grid, p.e:
2 C A WRONG
the correct answer is C, A is the worng answer. Right?

I think 62 through 70 are correct, except 67. I don’t know about that one but I think it is correct also.
Also best to understand RX-SOP and memorize the high, med, and low values for 5GHz and 2.4GHz.

@ Ronald V: yes you’re right. C is right (my suggestion) and C is wrong (dump proposed).
@ Wireless: I guess that question does not belong to this exam since it’s exclusively about security NAC architecture. Many thanks for your comments.

I guess that I’ll schedule my exam ASAP before Cisco changes / adds more questions.

Cheers.

Hi guys, I will take the exam on Monday 6th, so I´m studying accordingly your suggestions. Thanks in advance.

Hi Ronald V. I wish you the best!
This is the yime to pass this damn exam.
I’ll take mine on 8th Wednesday.
Since you’ll take the exam before me, may I ask you to try to memorize the answers available and any missing detail about the new question of the Work Group Bridge security feature? That would be great since I have serious doubts about that question because the answers were not provided.
A possible important detail that may be missing in the dump is if the clients would be only wired not wireless. That would exclude features related to wireless clients.

CRC32 of course, do you have an email?, please share it

When I asked you Ronald V, the idea was to have it posted here, only if possible, of course. :)

I will post a document consolidated I prepared based on you guys shared, the idea is to know if it is okay.

@CRC32, Please confirm if the material I prepared it is correct:
https://drive.google.com/file/d/0BxXxnlkIbN4DMmdRX1ZBUVR6TTg/view?usp=sharing

Thanks in advance

Clarification regarding the 29 new questions:

Q4 Flexconnect ACLs roaming client between APs in different Flexconnect groups are the ACLs in the new AP.
ACLs in AP Flexconnect group 1: In FLEXACL / out FLEXACL.
ACLs in AP Flexconnect group 2: In FLEXACLIN / out FLEXACL.
The VLAN 100 is the same on both APs / Flexconnect groups.

The question, that was not explicitly mentioned, should be, I think, something about which ACLs are applied to the client after roaming from the AP in flexconnect group 1 not anther AP in flexconnect group 2.
Answer:
In: FLEXACLIN
Out: FLEXACL
Comment: Not sure whether this answer is correct.

Q10 MSE calibration is not possible to, using the linear point collection:
Answer: RFID tags
Note: I guess calibration would be possible with RFID tags only with Aeroscout proprietary engine installed in MSE.

Q19 Workgroup Bridge security feature not supported in competitor WGB.
Answer: MAC filtering
Note: I’m not sure whether this answer is correct.
Features NOT supported with a WGB:
– Idle timeout
– Web authentication
Features NOT supported for wired clients connected to WGB:
– MAC filtering
– Host visibility

Clarifications regarding the answer grid:

19. 19 BD DE WRONG

Please correct my correction grid, since the correct answer is:
DE.

Due to a typo error I’ve inverted the answers, wrote first the dump proposed answer and after my suggestion.

Correct answer:
D. There is a limit of 20 wired client devices.
E. Multiple VLANs are not supported for wireless clients.

There is a limitation of 20 clients in the WGB. The 20-client limitation includes both wired and wireless clients.
Multiple VLANs for wireless clients associated to WGB are not supported.
http://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/7-0/design/guide/MeshAP_70.html#wp1962965

27. 27 D CORRECT
27 A CORRECT

Definitely the correct answer is A, Voice VLAN.

Sorry, my second suggestion, D, was a typo error I’ve not figured out until now, and should be ignored.

33. 33 ACFG/FH/GH DFGH WRONG.

I don’t know what’s the correct answer.
It can be ACFG, or ACFH or ACGH, but definitely is not DFGH.

40. 40 D MAYBE CORRECT.
I think the proposed answer maybe correct accordingly with my knowledge about Cisco IP networks design, despite not being able to find a Cisco document that mentioned this exact scenario with these exact proposed answers.

46. 46 DE AD WRONG
46 CE DE WRONG

Definitely the correct answer is DE since the question is related to the 5GHz channels, so the 802.11b is excluded.
By other hand there are 2 commands needed to enable the feature:
a. enable the feature for the 5GHz channels:config advanced 802.11a optimized-roaming enable
b. configure the feature as needed: config advanced 802.11a coverage data rssi-threshold -72

Sorry, my second suggestion, CE, was a typo error I’ve not figured out until now, and should be ignored.

48. 48 ADG MAYBE CORRECT
I think the proposed answer maybe correct accordingly with my knowledge about Cisco VoIP networks, despite not being able to find a Cisco document that mentioned this exact scenario with these exact proposed answers.

Clarifications about the QAs.

Please consider the corrections I’ve mentioned in the correction grid comments.

Regarding the lab please see below:

4. 44 LAB N/A
Since the dumps answer is pending I’ve suggested and posted (answering t jimmy bones) several weeks ago a possible correct procedure in a previous post based on the available (incomplete) information.

The question seems to me not clear since I may infer they want the APs get configured with the Highest priority but by other hand I may also infer they want the APs to be configured with the lowest Priority in order to allow a new AP to takeover if needed. I’m really confused about this.

Failover priority configuration encompasses a previous step,enabling Global AP Failover Priority feature, before set APs Failover priority as mentioned in Cisco Wireless LAN Controller Configuration Guide, Release 7.5:
Configuring Failover Priority for Access Points (GUI)
Step 1 Choose Wireless > Access Points > Global Configuration to open the Global Configuration page.
Step 2 From the Global AP Failover Priority drop-down list, choose Enable to enable access point failover priority or choose
Disable to disable this feature and turn off any access point priority assignments. The default value is Disable.
Step 3 Click Apply to commit your changes.
Step 4 Click Save Configuration to save your changes.
Step 5 Choose Wireless > Access Points > All APs to open the All APs page.
Step 6 Click the name of the access point for which you want to configure failover priority.
Step 7 Choose the High Availability tab. The All APs > Details for (High Availability) page appears.
Step 8 From the AP Failover Priority drop-down list, choose one of the following options to specify the priority of the access
point:
Low—Assigns the access point to the level 1 priority, which is the lowest priority level. This is the default value.
Medium—Assigns the access point to the level 2 priority.
High—Assigns the access point to the level 3 priority.
Critical—Assigns the access point to the level 4 priority, which is the highest priority level.
Step 9 Click Apply to commit your changes.
Step 10 Click Save Configuration to save your changes.
Link:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration-guide/b_cg75/b_cg75_chapter_01110000.html
Since the The default value is Disable, it’s mandatory to configure it!
Have you done that?
Do you remember the state of that configuration?
HTH

55. I’m really confused about this answer as stated in the correction grid.
This is what I’ve found:

The mesh network consists of Root APs (RAPs) and Mesh APs (MAPs). The RAP is the wired connection to the WLC for the MAPs which use their 802.11a radios as a backhaul to communicate with the WLC through the RAP.
Link: http://www.cisco.com/web/services/news/ts_newsletter/tech/chalktalk/archives/200911.html

The addition of RAPs into an area adds capacity and resilience to that area.
This wireless mesh cell has similar properties to the cells used to create a cellular phone network; that is, although the technology might define the maximum size of the cell, smaller cells can be created to cover the same physical area, providing greater availability or capacity. This is done by adding RAPs to the cell.

Link: http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/WiMesh.html

Link 2: Link: http://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/7-0/design/guide/MeshAP_70.html

@ Ronald V: I wish you the best for today!

@ Anonymous: Great and very useful effort. Many thanks.

For Lab
Wireless-> Access Points -> Global Configuration enable
1. enable global AP failover priorty (if possible within test sim, PL states it isn’t changable within sim)
2. insert IP address and name of backup primary controller
Wireless-> Access Points -> All APs -> each individual AP
1. Go to High Availability and insert IP address and name of primary and backup controller
2. Priority: default is Low. Scenario info for this part seems incomplete. Which AP needs higher priority?, we don’t know/not stated. Maybe they both need to be set to high.

15. I believe it is AEF.
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/82463-wlc-config-best-practice.html
It is advisable to configure multicast mode for mobility. This allows the client to announce messages to be sent on multicast between mobility peers, instead of unicast sent to each controller, with benefits on time, CPU usage, and network utilization.
This is something I always do on my WLC configs.

46. normally you would need all three 802.11a commands but 25% is default, so you only need the other two.