Share your ENWLSD Experience

Today I passed the exam with 96% !
Finally, I made it after all these times. I have been waiting for this moment. Took me 9 weeks of self-studies to pull this off.

i recommend Emma dumps above all the questions i found on the exam are from this dumps

what are the question formats on the exam? Are they all multiple choices?

@Issam Congrats, its a great feeling. Please share link to the Emma dumps

@KT, muitiple choice and drag and drop.

get actual all ccna exam from – dumpsspot

Hey guys , I want to share that I finally passed of the exam. Emma practice test helped me prepare by providing a lot of useful information and reel questions.

I mainly just wanted to share my perspective on the exam and I personally think that the exam is harder without practice test . It’s not enough to know the exam topics . You have to know the material and be able to interpret topologies and CLI statements FAST + memozire practice test questions and answers for 100% pass.

Emma is fake.
Anyone took exam recently?

Hello Anonymous,
This is the practice test i used to pass today
examsuccess.gq

exam completely changed i did exam few days ago from dumb 114 Q ,

@no valid dumb, do you recall any questions that you got in the exam?

Pass out there were 4 new question in my exam which are not exist here in file but 3 of them were very easy if you understand all the explanation for all the question here

I got a Lap which requires to configure HSRP over VLAN100 between two distribution switches

rmov #
glid.#tk

Hello everyone
Please share latest dumps.

Hello , I studied 2-3 hours a day and I passed the exam today. Some chapters may take you longer than others but some you will breeze though.
All the questions on the exam are from Rachid dump above, it helped me a lot to pass the exam.

Took exam yesterday lots of new questions Failed , 60% .Only

@Anonymous83
Do you remember some questions?

what tools , dumps did you use?

Hi all! Any updates on the exam? Which dumps are valid, please share

Passed on first attempt yesterday: 85/70/92/80/80/60

already have a post here if you are curious! exam was harder than Boson for me (in case of wording). Had to read multiple times to understand what they actually want from me.

All the questions come from Rachid shared on this page.

I took the exam last week, but i failed, available dumps ( 114 ) not valid at all, 90% of the questions are new.
people who confirmed that Rachid dump is valid, could you please paste here 4 questions from the dump, and i will confirm if they were in the exam or not? specially the 3 questions about WLC licenses

Thank you Mahmoud for your feedback. I have been saying for months that the exam is totally different from the dumps available that are out there. But many people said the dumps were good.
Now those who have valid dumps with the questions described by Mahmoud can show them in this thread. Thanks.

who can answer this

A company has two divisions Healthcare and semiconductor manufacturing. The healthcare division is on the main campus and is broken in two large Subnet based on Manufacturing and business. The manucafturing side is a large segment and require 4 controller to support the Aps and clients in a redundant fashion. the business network is half the size and only two controllers are needed. Healthcare sites entirely behind a firewall and connects from the outside of the firewall through an internal Network to another firewall that encompasses the one subnet that is used by the semiconductor division. That division required only two controllers to support redundancy the approach must:
• cause the least amount of work from the security team
• create the smallest number of groups on the controller
• provide the best level of high availability in case of controller failure
Which design approach must be taken during the mobility group design?
A – two Mobility groups (Health Care semiconductor) and a mobility list for each controller to include controllers from each Mobility group
B – two mobility groups (Health Care semiconductor) and a mobility list for each controller to only include controllers from that mobility group
C – three mobility group (healthcare manufacturing, Healthcare business, semiconductor) and a mobility list for each controller to include controllers from each mobility Group
D – three mobility group (healthcare manufacturing, Healthcare business, semiconductor) and a mobility list for each controller to have all the controllers from only that mobility Group

A wireless network engineer working for manufactoring company must create design using Cisco 9800 wireless controller the new netwok must provide network redundancy and availability. the existed Network consists of two Cisco switches that are both on the core and distribution layer these witches have 10G port and 1G. the design criteria must include
• the most available bandwidth at any one time in primary and failover modes
• the least time for Network failover in case of link failure
• maximize up time for AP access to the controller
which designs solution must be used for the wlc?
A – vPC to both Core switches with 4x10G in the same vPC
B – RSTP using 2x10G and 2x1G port on each core switch
C – LACP to both core switches with 4x10G ports in a private vPC
D – LAG using two LAG connections of 2x10G one to each core switch

I agree with @Mahmoud
I took the exam, theres a lot of new questions

@Ram0nAya1a Did you pass? or do you remember the new drag and drop question?

Allhamdolilah I passed since few minutes ! the test is the same as Rachid practice test, all the questions are identical!!

@Hafeez.
congrats.

could u please share some questions

@Mahmoud I didn’t pass.
Also I did not get the new drag and drop question.

I passed yesterday, this was my 3rd attempt at the exam. Test was not any less easier.

Learning material this time around was Dedier practice test : bahamod.ml, all the questions are the same, cisco guide for the course.

what are the answers to the questions mahmoud posted?

A❤lhamdollilah, Passed on first attempt yesterday: 95%
All the questions and drag & drop were from this dump.
laboratories.gq
You can rely to this dump to pass the exam with a good mark.
Good luck on the exam
Regards,

Has anyone currently approved?

How many questions does the exam have?

Some dump5 pages? What material do I use to approve?

Passed my exam Friday at 5am. Received virtual badge the next day.
All the questions come from the materials shared by the person called Emma in page 4.
This is the the most valid materials to use actually for the exam.
bestqanda.cf

@David

if you don’t mind me asking you. how many drag and drops did you get in the exam?

@David
how many drag and drops did you see in the exam?

does any1 know how many drag and drops are in the exam?

any1? LOL

I passed today

I am afraid that 114q is not valid.
For me the dump was useful to learn and find out some weakness, but not expect the same questions in the exam, only around 10 of 61 in the exam (and be careful because some question in this dump are not correct)

So cisco press certificate guide 300-425 & 300-430, video learning platforms and study!!

Good luck and study hard and you will get your 300-425

Hi Guys
I recently purchased pass leader… Has anyone used this and is it accurate 129 question
Regards
Experiment for me

ju

I passed today!

no labs.
6 drag&drop and questions the scoring now is per topic

cancl G
vyzp.Gtk

HelloΠ all,
I passed my exam today with a good mark (980/1000)
All the questions and drag & drop were from this dump.
remave Π to download
laboratories.gΠq
You can rely to this dump to pass the exam with a good mark.
Good luck on the exam
Regards,

Fadil is fake,.

What questions are on the exam?

what do you think of pa55leader?

Has anyone attempted this exam recently ? How was your experience ?

I want to team up for this exam to pass it asap , share some costs, email me at c i s c o at h o t m a i l c o m

c i s c o 2022 at h o t m a i l c o m

c i s c o 2022 at h o t m a i l c o m

Thanks David, I used the same practice test to pass A++
Almost 95% of the questions were there !
exam passed on 15 October
time spent : 1h30

A wireless network engineer working for manufactoring company must create design using Cisco 9800 wireless controller the new netwok must provide network redundancy and availability. the existed Network consists of two Cisco switches that are both on the core and distribution layer these witches have 10G port and 1G. the design criteria must include
• the most available bandwidth at any one time in primary and failover modes
• the least time for Network failover in case of link failure
• maximize up time for AP access to the controller
which designs solution must be used for the wlc?
Answer is D – LAG using two LAG connections of 2x10G one to each core switch.

A company has two divisions Healthcare and semiconductor manufacturing. The healthcare division is on the main campus and is broken in two large Subnet based on Manufacturing and business. The manucafturing side is a large segment and require 4 controller to support the Aps and clients in a redundant fashion. the business network is half the size and only two controllers are needed. Healthcare sites entirely behind a firewall and connects from the outside of the firewall through an internal Network to another firewall that encompasses the one subnet that is used by the semiconductor division. That division required only two controllers to support redundancy the approach must:
• cause the least amount of work from the security team
• create the smallest number of groups on the controller
• provide the best level of high availability in case of controller failure
Which design approach must be taken during the mobility group design?
Answer is B – two mobility groups (Health Care, semiconductor) and a mobility list for each controller to only include controllers from that mobility group.

Hi guys

Soon, I will have my exam. Could someone please send me the currently dump?

Thx a lot

mr.brook086ATgmailcom