Share your ENWLSD Experience
The new ENWLSD 300-425 is going to come to replace the old CCNP exams (the last day to take CCNP exams is February 23, 2020) so we create the “Share your ENWLSD Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new ENWLSD 300-425 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Your posts are warmly welcome! Hope you will find useful information here!
Mee too thanks Harry
Hey guys,
It will be possible to get valid dumps on my email please?
dabrowski_pawel[@]ymail.com
Appreciate your help. Thank you.
Hi guys,
Any news from valid dumps?
Thank you
I passed my Exam on my first try today. All the questions on the same are the same ones i revised in Emma dumps shared in this forum (page 4), thanks Emma ! Next Fortinet exams
Thank you Emma,
Passed since few minutes.
First of all i want to thank YOU! I passed the exam easly with your dumps.
Now, time to take some rest! then prepare for another certification.
Ciao
I got (97%) drag and dros ae same except 4 qs
????????????????.????????
PLS @Fadil @Hafeez @Anonymous, can you share the link of valid dumps?
Thank you for your efforts!
Get authentic the same real exam questions answers from D U M P S S P O T COM and also get a 30% discount. h t t ps :/ / www. dumpsspot . com / c isco / 300-425 – dumps > html
I think this site is not as reliable as you….
Every time I refresh the page via the F5 button, the counters on the page like Reviews, Clients passed Cisco today, Passing score in Real Cisco change randomly.
Please could you explain why this is happening?
Thanks
Thank you Emma, i passed too this morning, i can say now that Dedier dumps from page 4 is valid and stable
Pls Jonathan, can you share the valid Emma dumps?
Hello!
Wrote my 300-425 exam online at home yesterday and passed it luckily!
NO NUMERIC SCORE IS GIVEN! JUST ONLY PASS OR FAIL!!
A lot of new questions.
PassLeader
Yes, I used PassLeader.
PassLeader 300-425 (125q+)
Good luck!
Thanks Jonathan, passed me too with it. 113 Q dumps is valid.
Hello everyone,
I shall put updated files on tomorrow… with 30% discount
Comment your email
A wireless engineer must design mobility between two buildings at a campus site. The engineer has one controller at each site. The engineer is investigating inter-controller CAPWAP data and control traffic. Which two ports must be open? (Choose two.)
A – 5246
B – 5247
C – 8443
D – 16666
E – 16667
Refer to the exhibit.
An engineer determined that during a recent controller failure, some APs did not failover to their secondary controller based on the network design, which has sufficient licenses for all APs. The controllers are not in a mobility group but have A records for their hostnames in DNS. Which setting needs to be addressed?
A – The controllers must be in the same mobility group
B – The secondary controller IP address is incorrect.
C – DNS hostnames are required to be FQDN.
D – The AP failover priority was not set high enough.
A wireless network engineer working for manufactoring company must create design using Cisco 9800 wireless controller the new netwok must provide network redundancy and availability. the existed Network consists of two Cisco switches that are both on the core and distribution layer these witches have 10G port and 1G. the design criteria must include
• the most available bandwidth at any one time in primary and failover modes
• the least time for Network failover in case of link failure
• maximize up time for AP access to the controller
which designs solution must be used for the wlc?
A – vPC to both Core switches with 4x10G in the same vPC
B – RSTP using 2x10G and 2x1G port on each core switch
C – LACP to both core switches with 4x10G ports in a private vPC
D – LAG using two LAG connections of 2x10G one to each core switch
A company has two divisions Healthcare and semiconductor manufacturing. The healthcare division is on the main campus and is broken in two large Subnet based on Manufacturing and business. The manucafturing side is a large segment and require 4 controller to support the Aps and clients in a redundant fashion. the business network is half the size and only two controllers are needed. Healthcare sites entirely behind a firewall and connects from the outside of the firewall through an internal Network to another firewall that encompasses the one subnet that is used by the semiconductor division. That division required only two controllers to support redundancy the approach must:
• cause the least amount of work from the security team
• create the smallest number of groups on the controller
• provide the best level of high availability in case of controller failure
Which design approach must be taken during the mobility group design?
A – two Mobility groups (Health Care semiconductor) and a mobility list for each controller to include controllers from each Mobility group
B – two mobility groups (Health Care semiconductor) and a mobility list for each controller to only include controllers from that mobility group
C – three mobility group (healthcare manufacturing, Healthcare business, semiconductor) and a mobility list for each controller to include controllers from each mobility Group
D – three mobility group (healthcare manufacturing, Healthcare business, semiconductor) and a mobility list for each controller to have all the controllers from only that mobility Group
An engineer is designing a new wireless network, based on the design officeExtend access point functionality must be used. Which type of license must the wlc 5520 v8.3 have?
A – Wplus license
B – officeExtend AP license
C – plus license
D – base license
What is the wireless signal loss of a large cases of liquid materials being stored in a warehouse environement?
A – It is higher than dry goods
B – It is impactful but overall negligible to the RF design
C – It is less than dry goods
D – It is not impactful to the RF design
An engineer is upgrading the legacy access point to the 802.11ac wave 2 capable access point. The existing gigabite uplinked switches provide 802.3at. which switch limitation is a concern?
A – Collision domain
B – Interface throughput
C – High availability
D – Output power
A WLC SSO pair is set up. Which failure scenario causes a split-brain scenario?
A – RP is down.
B – Two distribution ports on the active WLC are down.
C – VSL is down.
D – One distribution port on the active WLC is down.
A network engineer is troubleshooting connectivity issues between two WLCs running 8.x code in SSO mode and finds that the redundancy management heartbeat is failing. Which packet type must be filtered for heartbeats when taking a capture to verify communication?
A – RSTP
B – UDP
C – TCP
D – ICMP
Refer to the exihibit
AireOS 5520:
Config mobility group domain CCNP
Config mobility group member add 00:1e:14:08:fb:ff 10.0.109.4 CCNP encrypt enable
Config mobility group member has 10.0.109.4 dc0582ed7748ecfdb543ced82caafa34b705a39
Config mobility group member data-dtls 00:1e:14:08:fb:ff enable
IOS-XE 9800-CL
Wireless mobility group name CCNP
Wireless mobility mac-address 001E.E63D.CDFF
Wireless mobility group member mac-address a493.4cb1.15e0 ip 10.0.100.2 public-ip 10.0.100.2 group CCNP
An engineer is about to establish a mobility peer connection between a Cisco Catalyst 9800-CL version 16.10.1e and Cisco AireOS 5520 version 8.8.120.0. The data path between the 9800-CL and AireOS 5520 is down, but its control path is up. Based on the configuration, what is the cause of the issue?
A. The certificate hash key is incorrect leading to data path down.
B. The data-link-encryption configuration is missing from the 9800-CL configuration.
C. Encrypted mobility is being used in the 5520 configuration leading to data path down.
D. CAPS is used to key in MAC address in the IOS_XE configuration leading to data path down.
These are all that i remember, if anyone has these answers, feel free to share.
During a wireless design all APs are mapped to designated controllers in case of a failure. The controllers are located in the same data center but in different racks. An AP failed over to a controller that was not defined on its High Availability tab. The customer does not want the AP to move back to its defined Cisco WLCs until they manually intervene. What needs to be addressed in the design?
A – Set AP fallback to enabled.
B – Set AP fallback to disabled.
C – Change the HA SKU secondary unit option.
D – Change the default mobility domain.
Hi guys
passed today by using this pdf only
result 85-96% in 6 sections pdf is still valid
????????????????.????????
I confirm dump from page 4 shared by Emma is valid, i passed my exam today and all the questions were there.
Your money is fully secured by DumpsSpot.com (300-425)
Money Back Guarantee, if you fail your test.
Hurry up as the offer ends this week! Get started today to get certified this week!
ENWLSD passed
Today was the first day, where you could write the exam. In the end I scored 95%, which was not bad overall.
I really liked the exam, even though there were some obvious typos.
It has 100+ questions and you have 120min to complete. I would say you feel really tired after 60+ questions.
ALL THE QUESTIONS ARE IN EMMA DUMPS
Feel free to ask if you have any questions!
I success in the exam today as well, i used Emma dumps and some courses to study in udeemmy.
every questions i found in the exam was from Emma dump, thanks to everyone here
@Raul @Orido, pls can you share with me Emma dump files?
does anyone have the answers for the questions that were posted. i failed the test once and i know those questions are on the test and arent in any dumps ive seen so far
@help I agree. Even if many write differently, the current pdf is no longer valid (I also failed a month ago)
@help i also failed the exam and can confirm that the questions were not the ones in the dumps I saw. Pls share valid dump files. thank you.
Passed today. It was very tough! Questions were really deep.
I thought I will fail but thanks God. Passed it! with the help of Emma materials. All the questions are identical.
Failed today. used Certkiller and ExamTopics to prepare. All their questions are not valid, they were new questions. The questions posted by Fail are all in the exam.
Stay away from Certkiller
Dumps only will not aid you in passing. Go through the study material and know all the topics before you book the exam.
I passed my exam on my first try the other day after studying on/off for the past 6 months. I’ve been in mainly telecommunications for the past 10 years with a little IT mixed in along the way. I will say that when I started studying I found out pretty quickly how little I knew coming into it.
I used same dump shared by EMMA page 4: docs.google.com/forms/d/e/1FAIpQLSdVtwPy7Jl23qG_S1PqA_3NuOt1KN1XILBfDxlmqg7vRCyM6w/viewform?usp=sf_link
@Hajar Please share sample of questions?
hb
Done my exam de minutes ag0 I got 98%
Crassh 9
vedb.9tk
A wireless engineer must design mobility between two buildings at a campus site. The engineer has one controller at each site. The engineer is investigating inter-controller CAPWAP data and control traffic. Which two ports must be open? (Choose two.)
A – 5246
B – 5247
C – 8443
D – 16666
E – 16667
Answer; D,E
During a wireless design all APs are mapped to designated controllers in case of a failure. The controllers are located in the same data center but in different racks. An AP failed over to a controller that was not defined on its High Availability tab. The customer does not want the AP to move back to its defined Cisco WLCs until they manually intervene. What needs to be addressed in the design?
A – Set AP fallback to enabled.
B – Set AP fallback to disabled.
C – Change the HA SKU secondary unit option.
D – Change the default mobility domain.
Answer; B
AireOS 5520:
Config mobility group domain CCNP
Config mobility group member add 00:1e:14:08:fb:ff 10.0.109.4 CCNP encrypt enable
Config mobility group member has 10.0.109.4 dc0582ed7748ecfdb543ced82caafa34b705a39
Config mobility group member data-dtls 00:1e:14:08:fb:ff enable
IOS-XE 9800-CL
Wireless mobility group name CCNP
Wireless mobility mac-address 001E.E63D.CDFF
Wireless mobility group member mac-address a493.4cb1.15e0 ip 10.0.100.2 public-ip 10.0.100.2 group CCNP
An engineer is about to establish a mobility peer connection between a Cisco Catalyst 9800-CL version 16.10.1e and Cisco AireOS 5520 version 8.8.120.0. The data path between the 9800-CL and AireOS 5520 is down, but its control path is up. Based on the configuration, what is the cause of the issue?
A. The certificate hash key is incorrect leading to data path down.
B. The data-link-encryption configuration is missing from the 9800-CL configuration.
C. Encrypted mobility is being used in the 5520 configuration leading to data path down.
D. CAPS is used to key in MAC address in the IOS_XE configuration leading to data path down.
Answer; B
A network engineer is troubleshooting connectivity issues between two WLCs running 8.x code in SSO mode and finds that the redundancy management heartbeat is failing. Which packet type must be filtered for heartbeats when taking a capture to verify communication?
A – RSTP
B – UDP
C – TCP
D – ICMP
Answer; B
Who has the latest dumps? need them like yesterday. writing exam on Thursday.