Share your CCNA Wireless Experience

Hi.

Congrats Cody.

Can someone share the last possible dump with me? Please send to godley85@ gmail.com

Any update regarding 429Q i hope someone could help me im going to take the exam this week..

:(

Guys please if somebody has updated workbook and latest dumps. i am ready to contribute fro purchase….!!!!

Sat the 200-355 today. Scored 850 out 1000. Of course the exam is 860 pass rate so I failed. Extremely disappointed with the high pass rate but I guess I just have to go again.

Just for input, I went through the entire Cert book & the CBT nugget videos, as well as various text questions including the questions in the cert book from the CD & on the Cisco wesite (which I was scoring highly 900+ on regularly)

I also have a 380q which I was scoring 100% on.

As for the exam, I’d say the 380q was about 40-50% valid, the rest were new questions. I strongly suspect the 410/429q is also invalid.

I got no WCS/CCX/PI/Meraki questions in the exam at all. No D&Ds & no SIMS – Just all multiple choice.

Absolutely gutted if I’m honest! not quite sure where to go from here. More reading I guess…

Can someone please share the 429q dump…
breeze_varna @ gmail.com

Billy, any new questions you remember in your exam today?

I’m trying to remember kitkat

One question on 2.4GHz, how many channels and so on.

Which tool would you use for x survery (I think it was passive survery, can’t remember)

A couple of command questions

One I’m pretty sure I got wrong was

Which tab on the WLC would you use to view AP connectivity

A) Management
B) WLAN
C) Wireless
D) AP Manager

I thought that answer was monitor if I’m honest!

I’m going to try and find the answers to the questions I got and hope I get the same questions again in a weeks time. Failing by 1% is painful…..

I remember one more question now

Transmitter 20DB – 2db cable loss + 4 antenna gain (69db free space path loss) +4 antenna gain = 2db = ? dbm?

Anyone know the answer to this question?

I put the answer for this as -45 which I think is right?

20 -2 + 4 = 22 – 69 = -47 + 4 -2 = -45

Is t hat correct?

Another question I got….

How much cell overlap for 2.4GHz?

A 5%
B 10%
C 15%
D 20%

Think I put 15 but come to think of it I’m sure it’s 20!

Thanks for sharing, Billing.

Cisco recommends 10–15 percent overlap for most data applications and 15–20 percent overlap for voice. So for data network, I think 15% cell overlap is correct.

Hello,

C) Wireless
-45 is right.

I think it is 15% not sure.

Another questions are:

TKIP – 3 components?

Q: Where do you can change the Power AP Level?
A: Wireless

Q: Two components of mobility anchoring?

TKIP – 3 components
– board cast key rotation
– MIC
– Per packet hashing

Please share any study material mailman23@ usa.com

Failed today with 814 points…
Studied the same material as Billy.
The questions from the 378q were present in a percentage of 20%-30%.

Cannot remember more questions right now because I am still dizzy.
As for the cell overlap question that you mentioned before, I saw it today but it was about VoWAN.

what about 429Q , did you have that ?

No, unfortunately couldn’t find it anywhere… If anyone could provide me the dump or where to get it from I would be grateful…

Guys there is below question about Syslog severity level which is configured on Error level , the question said what other severity level will be include , the Answer Said D , but I think it should be C , the explanation of the question also say it include Error and greator ,

A. syslog level errors only
B. all syslog levels
C. only the syslog severity level number of error and greater
D. only the syslog severity level number of error and less

Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Explanation:
Here the syslog level is set to errors, so it will send all logs with a severity level of errors, as well as all
other messages with a greater severity level.

what is your concern ?

Hi,
As it says level number of error, i understand it refers to table. And numbers are level and less..

Table 3 Message Logging Level Keywords
Level Keyword Level Description Syslog Definition
emergencies 0 System unstable LOG_EMERG
alerts 1 Immediate action needed LOG_ALERT
critical 2 Critical conditions LOG_CRIT
errors 3 Error conditions LOG_ERR
warnings 4 Warning conditions LOG_WARNING
notifications 5 Normal but significant condition LOG_NOTICE
informational 6 Informational messages only LOG_INFO
debugging 7 Debugging messages LOG_DEBUG

Regarding the cell overlap question, I suppose that refers to voice ( please correct me if i’m wrong).

From http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan41dg-book/vowlan_ch3.html

•The optimal VoWLAN network requires overlaps of 20 percent (2.4 GHz), and approximately 15 to 20 percent (5 GHz), where a WLAN Data design may use an AP cell overlap of 5 to 10 percent.

I think I’ve seen both questions with 2.4 and 5 ghz, so be careful ;)

Unlucky Mailman, almost as close as my 848…

If you can remember any questions then please post! I’ve found a few questions I had in the exam and what appear to be the correct answers… although I don’t know if i’ll get the same questions next time round.

Hi guys,

I took the exam but i failed too, I recommend dont use the 411 and 3.. dumps cause the exam compose of new questions i could say that 5% of questions came from 411 and that’s it.

Too many failed attempts on this exam, something needs to be done about this.
write a valid dump and compile the latest questions. I am totally new to wireless technology and I am not ready for exam. not even sure I’ll take it with so many bad news

Cisco love it when candidates fail cause you gonna go back to pay them more money.
it’ll be nice if you guys can remember the questions so you can compile new paper and go beat it.
When I read bad news here I keep thinking if you guys been studying this for a while and failing what chance do I have? is it worth studying hard for? or just study to gain the knowledge and ignore the cert.

Passed yesterday!!

no drag and drops/labs. Just single and multiple choice questions.

Both 429q and 378q are not 100% valid. I think I saw about 10%-20% questions on the exam; the rest of the questions are new. I studied with ccna wireless 200-355 study guide (david hucaby), CBT nugget 200-355 videos and jerome henry’s 200-355 videos. You can download all this stuff for free; just do a google search. I also purchased a cisco 2504 controller with 2 cisco APs for my own lab.

I remember getting a few questions about cell overlap, maximum EIRP for different regions, mobility anchor, lobby admin, RF calculation (dbi, dbd, dbm, etc), antenna patterns, (yagi, semi-directional, high directional antennas, H-plane, E-plane, MCS (modulating and coding schemes), mandatory and optional rates, etc. I’m sorry I can’t really recall the full questions. Anyways, goodluck everyone!

Hi,

I’m about to take the 200-355 exam soon. Hope somebody can have a collection of legit dumps soon.

Congrats Starfish and thank you for the update
can you please tell how long did it you take you to complete the course.
I have already completed both Jerome Henry and Keith Barker videos, just reading randomly i haven’t put my head down to go through the book yet. I can now navigate through Wlc and ISE on Vmware and planning to buy APs in the near future.
I do go through the notes from video lectures daily

Hii All..

Finally ….

Just passed Cisco 200-355 exam… got 921/1000

Study from 429 questions… it is still valid .. 70-80% questions from dumps.

One request to everyone please understand the questions becz in exam they did small changes in questions which will create trouble for you to give the answers.

N Finally Thanks to everyone who shared there experience in this Blog. Which help me a lot..

Best of Luck all of you…

swapnil, do you have the 429q as a pdf?

Congrats Swapnil and thank you for the update
I was about to ask the same thing Billy asked you, anyone with 429q please share
not ready for the exam but just need to be up to date

THANKS

Hi all,

I have recollect some question which is not available in dumps, hope this helps.

1) There is image in below link at “Verify” table which user in login on controller.

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/97073-auth-lobbyadmin-radius.html

Loby admin

2) what are the caracterstic of 2.4Ghz ? (choose 3)

.total 1 to 11 channels are available
.total 1 to 14 channels are available
.fcc allowed 1 to 11 channels
.fcc allowed 1 to 14 channels
.max 100mw power allowed on CCK
.max 100mw power allowed on OFDM

3) Three governing bodies for Wireless ? (choose 3)

.FCC
.ETSI
.ICAN
.INIA
.TELEC

4) how to upgrade controller throgh CLI from version 8.0 to 8.1 something.

. trought tftp option is there other option is not suitable.

5) what are the real time application. (please check by your own)

.voice
.browsing
.packet loss
.igtr or irtg (not remember)
.one more is there which is important but not remember

6)what is use of survery tool ?

. find the RF noise and interference.
. capture date and analsis it offline
. two more options are there.

7) what is the minimus RSSI required for voice on cell boundry.

.25
.-67
.-40
.-75

8)Transmitter 20DB – 2db cable loss + 4 antenna gain (69db free space path loss) +4 antenna gain = 2db = ?
.-45
.-46
.or two opton are there.

Please find the answers by your own and best of luck for your exam guys..

@ Billy please send E-mail on swapnilborade @ yahoo dot com.

for above question real time application need to choose two option.

please who can share the answers very soon ?

Thank you Swapnil – I sent an email entitled “CCNA Wireless 200-355”

Do you know the answers to the above questions, for it is

2) total 1 to 14 channels are available
.fcc allowed 1 to 11 channels
.max 100mw power allowed on OFDM

3) .FCC
ETSI
TELEC

4) Not sure

5) voice & another which I think was video conferencing

6) find the RF noise and interference.

7) -67

8) -45

I got all of these questions in the exam, although I’m sure I was wrong on some of them.

2) what are the caracterstic of 2.4Ghz ? (choose 3)
1.total 1 to 11 channels are available
2.total 1 to 14 channels are available
3.fcc allowed 1 to 11 channels
4.fcc allowed 1 to 14 channels
5.max 100mw power allowed on CCK
6.max 100mw power allowed on OFDM

Correct answer are 2,3,5

please share de 429q dumps, thank you

mail: milton-arq10 @ hotmail dot com

Would be so grateful if someone could send the 429q, thank you so much! :)
cisco8023 @ gmail dot com

Please share pdf file dumps, thank you
mail: {email not allowed}.

Please share pdf file dumps, thank you
mail: xuantudx1310 @ gmail com

Please share dumps email:{email not allowed}

Please share dumps email:abdelrahman_72016 @ yahoo .com

Dears,

could any one share 429 qs as long as it is still valid

Thanks

Dears,

could any one share 429 qs as long as it is still valid or send it to my mail ({email not allowed})

Thanks

Dears,

could any one share 429 qs as long as it is still valid. mohammed_ragheb2006 at yahoo dot com

Thanks

Did anyone got below question ??

When using ofdm,how many subcarriers are devoted to carrying data ?

Shab, the answer is 48.

Please share 429 questions to me, zahid0 at gmail dot com

Congratulations Swapnil and thanks for those shared new question….. If you don’t mind, may I ask please a pdf copy of the 429q. Thanks in advance and good luck to your endeavour.

Can somebody share the 429q ????..I have looked for it but i didn´t find ..
csco11238410 at gmail dot com
Thanks for advance

swapnil, do you have the 429q?
Could you share them?
rxxl01@ hotmail. com