Share your CCNA Wireless Experience

@Gerhard, congratulations on passing! Do you remember which questions came from Phyllis? I understand questions 228-272 came from JohnJacobs file.

Thanks

@JohnJacobs please grant me access to ur pdf so I can provide a feedback

greg, do you have the new exam?
The following are from phyllis
qn 228, qn 227, 226,223,218,217,216,214,207,196,183

@sammy I do not have access I tried the link but it is set to private. Do you have access?

no, set to private as well.

If someone has the pdf of JohJacobs file, please send to me
ttham4706@gmail.com

@Patric thanks alot for making me understand,but the problem is JohnJacobs link is private, he should accept my request. @JohnJacobs please accept it. or @Patric can u email me the necessary things I want, i rele appreciate if anyone can send the dumps and the details I want because have to do this exam soon. email – indula93@gmail.com
thank you. and wish you Good luck..! :D

me too please, JohJacobs link is still private, if anyone could send the files would be greatly appreciated :)
rockchek619@yahoo.com

Hi guys,

Can someone explain to me this questions Q220

Which change can correct inband access to the WLC?
A. change the switch FastEthernetO/1 duplex setting
B. change the switch FastEthernetO/1 speed setting
C. enable the switch FastEthernetO/1 spanning-tree port-fast trunk
D. change the switch FastEthernetO/1 trunk encapsulation
E. change the WLC management interface to use DHCP
F. change the WLC management interface VLAN
G. change the WLC configuration of NTP
H. browse to WLC via http://10.10.10.10

Apparently the answer is D, which I don’t understand why.
Thanks

I would have said F. wlc —-trunk—- switch
wlc has management vlan 1 which will be tagged. If this is changed to interface vlan 0, the frame will be untagged

This is the explanation on the dump, but I dont understand it
Explanation:
All of the other ports in the network are using the default VLAN (VLAN 1) but port 0/1, which connects to the WLC, is configured as a trunk, so VLAN 1 is not
operationsl

I tried emailing you, but your email doesn’t work! nyon1260@yahoo.com. Keeps bouncing back

I have the JohnJacobs PDF and will email it to the individual who will share it for a minimum of a week.

@Guilotte
I think if the LAP is in Local Mode the WLC conducts the traffic, if it is in Flex or Autonomous
the switchport must be set to trunk.

Hi, @james please send me the PDF, I will share it. ernesto_sg20@hotmail.com

Hi James,
Please send to ttham4706@gmail.com

Also, you are right. Flexconnect mode, link must be trunk. But it doesn’t zay whether it is flexconnect or local mode. Some of these questions are very badly worded!

I will share it asap on mediafire or rapidshare

@ernesto
I sent it.
One Hand washes the other !

Hi James,
Can you send to me also. I will upload it now asap.
I have exam in 2 days

@sammy
You have it.

thank you James! As promised, going online now… Stay tuned

ok all download from link below.
http://www.mediafire.com/download/42nc2i311irnl3y/640-722.pdf

Very Important: Don’t just memorise braindump questions and do the test. Study and understand! Braindump should be used as one of your final study material along with cbt nuggets, offical cert guide etc.
All the best and help others as you have been helped.

thanks also to JohnJacobs the original uploader

Ones and Zeroes !

thank you sammy and james!

I just took the test and didn’t have any drag-n-drop questions. Did anyone recently take the exam and have them?

Just passed my exam.
Thanks to JJacobs for the pdf. Thanks Sammy for trying to send the email, though I realized I entered a wrong email. Thanks to JP for the question numbers, which were correct. No drag & drops.

Can anyone explain this question:

An installation uses a 21dBi parabolic dish. It is connected to the 802.11n radio via low loss
antenna coax rated at 4dB loss/100 feet. After testing, it has been determined that 2mW of power
will be lost in the cable. An EIRP producing 200mW is desired. What should the transmit power be
set to?
A. 8mW
B. 3dBm
C. 3.16mW
D. 5mW
Answer: C

200mw=23DB
2mw=3DB

EIRP = Power + Gain – Loss

23=P+21-3
23=P+18

P=5 ?

@Stider correct, though you need to change the 5DBm to mw which is ~3mW, so C is correct

Yes, just realised – oops!

@Chris
Did you pass ?

@Guillote how did u prepare?

Q265, would’nt it be the monitor – APs?

@Patric

You are right.

@Chris
A word to the Wise.
Read the comments from this
Forum & Success is
practically guaranteed.

@AA That’s right.

To all new comrades, dump has changed since last month philly’s isn’t valid anymore, new JohnJacobs dump here:

http://www.mediafire.com/download/42nc2i311irnl3y/640-722.pdf

It is legit, I take the exam and dump is valid. As I posted previously, the whole new set mix is included on the exam and some of the phylli’s too, NO SIMS NO DRAG AND DROP.

(39,46,47,67,79,84,86,87,106,108,109,134,136,141,144,148,151,179,189,197,195,218,227,228 trough 272) from the JohnJacobs pdf to be exact.

And quoting @Sammy:

Don’t just memorise braindump questions and do the test. Study and understand! Braindump should be used as one of your final study material along with cbt nuggets, offical cert guide etc.

Good luck.

@JP great post! Thanks alot.

Passed !
Ones & Zerows

@AA congratulations!!! Did you see anything different then JP’s question numbers above?

I have been studying the book hard. Should be ready for the exam next week.

Passed 1000/1000 JP is right

I am writing my exam on the 13th of June, 2015. Are the Dumps still valid or updated? Please let me know. Thanks

@Greg
JP was 100% correct .
Happy Hunting !

@AA – thanks!

For study ccna please refer the site below commendable

site I clear my ccna exam thanks

ccnageeks@b l o g s p o t@c o m

I just found that PassLeader has updated 640-722 exam dumps:
http://www.passleader.com/640-722.html
304 Q&As, updated on Jun 11, 2015
Did this exam just updated? Anyone confirm please?

I found that JohnJacobs’ pdf dumps have total 272q and PassLeader 640-722 dumps have 304q here: http://www.passleader.com/640-722.html

Passed today!! 930/1000. Its all in the pdf. Thanks everyone, and good luck too you who are taking it!

I have produced a vce file from JohnJacobs pdf file, all questions.

Cisco.Actualtests.640-722v2.2015-06-12.by.Erine

linked here: https://www.mediafire.com/?cy184bamvp4439b

Hope this helps you guys out.

Question: Do we need to study all questions on JohnJacobs pdf or just the numbers JP listed???

Excellent contribution @Stryder

I would recommend study all questions, just in case. And study harder the new set.

Passed Exam Today With PassLeader 640-722 Exam Dumps(304q vce file):
http://www.passleader.com/640-722.html

stop posting spam please passleader