Share your WIDESIGN Experience

hello gays this is the link for 140 question with 7 new question
we must find the best answers for the new questions
http://www.mediafire.com/file/zcvrk0ccviayjwp/300-360.zip

Hi Guys, there another question that I was studying. the tirst one im sorry for my english.

Some DUMPS inform the BEFH and they are wrongly, because.

A. Power is necessary to turn on the AP, includind should analise how that will be do.
b. building is necessary to put on the map, if you search on the cisco’s content you will find this information
c. traffic lights is not necessary to perform a wifi mesh.
d. sattelite dishes is not necessary because you can perform with another antennas
e. line of sight is necessary cause in some cases you have calculate the azimute or find another way to build wifi mesh.
g. power line is not necessary i don’t know explain

h. mouting is necessary because if you don’t know how mouting the equipament the right way, it doesn’t work correctly.

An engineer is deploying an outdoor Mesh network. Which four major factors should be considered?
(Choose four.)

A. power (yes)

B. buildings (yes)

C. traffic lights

D. satellite dishes

E. line of sight (yes)

F. network connectivity

G. power lines

H. mounting (yes)

Hy Guys, wich is the best awnser?

You perform a initial RF plan for a site by using cisco prime infrastructure. which two actions improve the real-time handoff

A) adjust the azimut angles of the ap antenna V
b) adjust the resolution X
c) Add or move the APs on the map.
d) Change the AP type
e) Adjust the RSSI cut off value

The latest 2018 version CCNP dumps collection (300-360/300-365/300-370/300-375):

https://docs.google.com/spreadsheets/d/1Yx4MUGmaLRn-UtgVVlfEdrpnM9d0RK02xJwjPmi-jCw/

Good luck!

@ Tony
i think C and E

Thanks for your tip WIRLESS_CCNA, i was thinking A and E…

WIRLESS-CCNA do you go to do this exam too?

failed tony

I’m sorry to hear that WIRLESS-CCNA.
But the questions are very different from the dumps?

Appreciate your tips

the dumps is wrong with more 15 new qestions

Did you do it this year?

Hi WIRLESS-CCNA and Tony,

I´m studying for this exam too. I want to do it in March.
Do you study for the link you share? The questions are wrong WIRLESS?

Hi all, i have cleared my exam with 110q dumps. Thanks to this forum and thanks to all user who shared thier experiance. I failed once but yesterday i cleared my exam with 911 score. Once i failed i used some cisco docs and i bought dumps frim premdev. All i got from the dumps

in the last week

Hi Wirless-CCNA,

Did you find all answers of 7 new questions? What do you think about the question 1 ( 2 commands for autonomous AP – tx power 7 – 5Ghz)?

Thank you.

hy guyz you want to pass 300-360 exam in short time then you must need dumps or real exam questions you can get from https://www.pass4surekey.com/exam/300-360.html

Hy tom,

I think its A and E

What do you think about tony question (below)

Thanks Mazid mali for your post i passed my exam.
Guys passleader is not valid it will not cover all , i used both dumps passleader and premdev

As per my experiance i recommand premdev. Thanks

I go to exam yesterday and failed. Every question is on dump.
The problem of the 140q dumps, is that the anwsers are not correct.

As someone get in touch to see with me How can we correct the anwsers.
I appreciate.
team work, Will be the right way.

For example

What take in consideration to mesh networks (choose two)

Power
LINE of sight
Buildings
Network connectivit

Design 6 buildings with one wlc in each. What deployment is

Centralized
Autonomous

I think the deployment is centralized although the dump answers are autonomous. I was not able to find in any cisco doc about this kind of design can be autonomous. autonomous is when you do not use controllers.

you deploy a wireless network for a common area located outside of a student dorm by using patch antennas. _Students report week signal. Possible cause?

1- neighboring buildings
2- vehicules
3- trees
4- bluetooth interference

I think is 2 ou 3!!!

Yes Tammy . I think that is the correct answer too.
These are in the exam last week and i think they arent correct at the dumps

you deploy a wireless network for a common area located outside of a student dorm by using patch antennas. _Students report week signal. Possible cause?

1- neighboring buildings
2- vehicules
3- trees
4- bluetooth interference

I’m not sure what is the correct one here, they are all can be correct so I will go with the dump answer, D

Question 78: ETSI domain. I think the correct is B ( 1,5,9,13) not A (1,6,11). 1,6,11 is FCC not Europe.

Tom,
I think the dump as the correct anwser.
ETSI is Europe Telecomunication…. And in Europe the channels are 1,6,11

This leave in my exam? What do you awnser?

What take in consideration to mesh networks (choose two)
Power
LINE of sight
Buildings
Network connectivit

There was a new question about. STPEC i think.. (choose 3)
– Gold QoS
– Platinum QoS
The other 3 dont remember

Tammy do you go to exam?

Another question in exam last week?
What do you think?

You perform a initial RF plan for a site by using cisco prime infrastructure. which two actions improve the real-time handoff (choose two)
A) adjust the azimut angles of the ap antenna
b) adjust the resolution
c) Add or move the APs on the map.
d) Change the AP type
e) Adjust the RSSI cut off value

Another with doubts, is B or C

A customer has determined that aesthetics is a primary concern for their upcoming guest deployment.
Which design consideration can be leveraged to address this concern?

A. Paint the access point to cover the LED from being noticeable
B. Use enclosures to hide the wireless infrastructure in the surrounding environment
C. Deploy environmentally friendly cabling components to blend into the environment.
D. Use AIR-AP-BRACKET-1 to allow for greater mounting locations

WIRLESS-CCNA when do you go exam again? Let´s work the wrong questions ..we put then here and together we can correct some of them..
the questions that I am putting in the forum is because they are not totally correct (and i pay for that with my exam fail)

Do you think B is the correct anwser?

Refer to the exhibit. An engineer has determined that Cisco 7925 phones are roaming between 2.4 6Hz and 5 6Hz radios on the same access points, which results in poor audio performance Which action must the engineer take to mitigate this issue?

A. Enable TPCv2 to normalize the RF environment.
B. Configure EDCA parameters for Voice Optimized.
C. Configure the Cisco 7925 phone to only use 5 6Hz.
D. Enable Band Select on the WLAN

Tony, I failed my exam too and pain for dumps and the test. I’d like to work with you guys on the wrong questions.

I think C is the correct answer for [An engineer has determined that Cisco 7925 phones are roaming between…]
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7925g/firmware/1_3_1/english/release/notes/7925_131.html

here is another link
https://supportforums.cisco.com/t5/wireless-ip-voice-and-video/calls-drop-out-when-using-a-7925g-phone/td-p/2609789

Yes .. i agree Tammy.. follow-up your links i think is the correct anwser

Tammy my guest for that is E and C
What do you think?
You perform a initial RF plan for a site by using cisco prime infrastructure. which two actions improve the real-time handoff (choose two)
A) adjust the azimut angles of the ap antenna
b) adjust the resolution
c) Add or move the APs on the map.
d) Change the AP type
e) Adjust the RSSI cut off value

Like this.. i have doubts in B or C

Another with doubts, is B or C

A customer has determined that aesthetics is a primary concern for their upcoming guest deployment.
Which design consideration can be leveraged to address this concern?
A. Paint the access point to cover the LED from being noticeable
B. Use enclosures to hide the wireless infrastructure in the surrounding environment
C. Deploy environmentally friendly cabling components to blend into the environment.
D. Use AIR-AP-BRACKET-1 to allow for greater mounting locations

Tammy and WIRELESS-CCNA if you want se could talk by e-mail and change impressions!!!
Here is my nati19661966 at gmail dot com.

I Will take the exam again in two weeks

Hi Tony, do you know how many questions are wrong in 140q? I can try to help too.

Hy Tom, i dont know how many, but 25% more or less are wrong.. i say that because i follow this 140q, and i failed my exam with all anwser in the 140q. The problem is to identify what is wrong… Because of that we are trying to post here some off that to everyone help

Like this for example.. in many dumps the anwsers are different. I think LINE of sight is correct, but what is the other??

What take in consideration to mesh networks (choose two)
Power
LINE of sight
Buildings
Network connectivit

Some questions are impossible to answer. Question 44: What is a common cause for signal attenuation?
A) Cinder block wall – 4dB
B) Office Window – 3dB
C) Metal Door – 6dB
D) Glass Wall – 6dB

For me are all. Why just letter C?

Tony, I’m try to find the answer about mesh network, but cannot find yet.

My comments do not appear more. I don’t know why.

Question 51… I think is wrong.

Interferes in a Hospital. I think is related a magnetic not laboratory or emergency room. What do you think?

Tom, that is correct. Its in cisco info. Ktichen, emergency Room and laboratory

Tom, Tammy, WIRELESS-CCNA what do you think?
Another question that is ambíguos: some dumps say 80 other 225!!!!

What os the otpimal distance for AP 24MBs without considering the ambient?

a)225 feet
b) 80 feet
C) 150 feet
D) 100 feet