Share your WIDESIGN Experience

Please share 140q full version

Good day Respected Members, please visit our website to check our latest CCNA-CCNP Wireless Pass rates.
https://www.591lab.com/nanp

latest ccie dumps
http://cciedump.spoto.net/rs-ccie.php
good luck all guys

And, Part of free PassLeader 300-365 dumps are available here:

http://www.ciscobraindump.com/?s=300-365

(71q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

And, Part of free PassLeader 300-370 dumps are available here:

Good Luck!!!

And, Part of free PassLeader 300-375 dumps are available here:

Good Luck!!!

2018 spoto latest ccna dumps
http://cciedump.spoto.net/ccna-wireless.php

Donald December 18th, 2017
A wireless engineer is hired to design a network for six buildings with a WLC in each building to support the access points. Which type of wireless architecture is being used?

A. distributed deployment
B. autonomous deployment
C. unified deployment
D. centralized deployment

Answer: B

–> this is false. I think the right answer is D.

Donald, in this case the correctly answer is A, cause has wlc in the all buldings without a wlc centralized.

https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob73dg/emob73/ch2_Arch.html

In the Design Considerations shows this it.

follow the book that i ve studied.

https://books.google.com.br/books?id=LN1xako6zIwC&printsec=frontcover&hl=pt-BR#v=onepage&q=yagi&f=false

Guys more one question

I ve looking for a explanation about this question bellow, and I found this it:

This C is correctly why when you enable DCA and TPC on the both bands, causes on the legacy 802.11b/g a reduces of power, and how they don’t know some frequency because are legacy, so they are affects by low power.

TPCv2: Interference-optimal—For scenarios where voice calls are extensively used. Tx power is dynamically adjusted with the goal of minimum interference. It is suitable for dense networks. In this mode, there can be higher roaming delays and coverage hole incidents.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-4/config-guide/b_cg84/radio_resource_management.html

A hospital environment was designed to guarantee RF coverage at or better than -67 dBm in the 5 GHz spectrum. The customer mandates that RRM be used
for DCA and TPC in both bands. After deployment, why do many of the legacy 802.11b/g devices have difficulty maintaining connectivity?

A.

Excessive co-channel interference in the 2.4 GHz band exists.

B.

Excessive overlapping channels in the 2.4 GHz band exists.

C.

TPC drastically reduces Tx power in the 2.4 GHz band.

D.

TPC drastically increases Tx power in the 2.4 GHz band.

Hi Guys, there another question that I was studying. the tirst one im sorry for my english.

Some DUMPS inform the BEFH and they are wrongly, because.

A. Power is necessary to turn on the AP, includind should analise how that will be do.
b. building is necessary to put on the map, if you search on the cisco’s content you will find this information
c. traffic lights is not necessary to perform a wifi mesh.
d. sattelite dishes is not necessary because you can perform with another antennas
e. line of sight is necessary cause in some cases you have calculate the azimute or find another way to build wifi mesh.
g. power line is not necessary i don’t know explain

h. mouting is necessary because if you don’t know how mouting the equipament the right way, it doesn’t work correctly.

An engineer is deploying an outdoor Mesh network. Which four major factors should be considered?
(Choose four.)

A. power (yes)

B. buildings (yes)

C. traffic lights

D. satellite dishes

E. line of sight (yes)

F. network connectivity

G. power lines

H. mounting (yes)

Hi guys I had last time a really confusing question in my test:

… acceptable cell overlap for voice and data services?

a) 7 MHz
b) 12 MHz
c) 15 MHz
d) 17 MHz
e) 20 MHz
f) 30 MHz

Have anybody an idea what is the correct answer?
I am still surprised how can be “cell overlapping” in MHz.

please 300-360 can you share the dumps of the exam
thnx

Thanks all for sharing your experiance i cleared my exam yesterday, i got all questions from premdev material , i cleared my exam. This forum is very helpful to me

Hi,

I´m going to do the exam in the next few weeks. I´m stuying througt the cisco site and other material.
Does anyone go to do the exam too? Or anyone do the exam recently?
Any tips?

Thanks

Omi,

How many questions have premdev material?

Thanks

Bali,

60 questions.

Hi guys I had last time a really confusing question in my test:

… acceptable cell overlap for voice and data services?

a) 7 MHz
b) 12 MHz
c) 15 MHz
d) 17 MHz
e) 20 MHz
f) 30 MHz

Have anybody an idea what is the correct answer?
I am still surprised how can be “cell overlapping” in MHz.

e) 20 Mhz
For voice deployments, it is recommended that the cell edge should be at −67 dBm with 20 percent overlap.

Im sorry 300-360.

I don’t know how many MHz, but in the cisco’s material, it is recommended 20 percent overlap.

@ Omi…how many times did you gave exam. On 19th Oct 2017 you posted comment that you passed exam using Premdev’s questions and again on 10 by using Premdev’s question….

OMI CAN YOU POST FEW QUESTION PLEASE. IT WILL HELP ALL OF US. THANKS IN ADVANCE

CCNP 300-360,

It´s not many questions 60. If the exam as 60q, how can it´s enough to pass, if the probability of leaving the same questions is very low??

Suzan,

Do you go doing the exam? Can we share same info, if so?

Thanks

Sam,
How many questions as your share?

Are there labs/simulations in this exam?

How can I find “premdev” dumps?

I passed the 300-360 exam but I prepared Testcollection 300-360 test questions. 92% questions in the exam from his practice test. So download free 300-360 questions and answer and prepare it and pass the 300-360 exam on the first attempt. For other information visit us: https://testcollection.us/300-360-vce-download.html

An engineer is deploying an outdoor Mesh network. Which four major factors should be considered?
(Choose four.)

A. power (yes)

B. buildings (yes)

C. traffic lights

D. satellite dishes

E. line of sight (yes)

F. network connectivity

G. power lines

H. mounting (yes)

for me the correct answer is : AEFH

A hospital environment was designed to guarantee RF coverage at or better than -67 dBm in the 5 GHz spectrum. The customer mandates that RRM be used
for DCA and TPC in both bands. After deployment, why do many of the legacy 802.11b/g devices have difficulty maintaining connectivity?

A.

Excessive co-channel interference in the 2.4 GHz band exists.

B.

Excessive overlapping channels in the 2.4 GHz band exists.

C.

TPC drastically reduces Tx power in the 2.4 GHz band.

D.

TPC drastically increases Tx power in the 2.4 GHz band.

C is right

Hello Guyz!
today i pass my 300-360 exam by learning pass4surekey study material, 90% exam questions comes from dumps i get from pass4surekey. https://www.pass4surekey.com/exam/300-360.html

Thank You

@reen , send us the .pdf please

Question: Are there labs/simulations in this exam?

2018 latest CCIE Dumps
freeciscodumps.com/rs-ccie.php

I think on dumpsgator Q&As are very good for the people who do not have much time for their exam preparation. You can easily pass the exam only by memorize their questions and answers.
Click and download your 300-360 Question Answers Dumps: https://dumpsgator.com/download-300-360-braindumps-questions.html

You have best opportunity to Pass Designing Cisco Wireless Enterprise Networks (WIDESIGN) Exam by learning dumps from pass4surekey. Huge number of peoples pass 300-360 exam in first try by learn pass4surekey study material. I will recommend you this https://www.pass4surekey.com/exam/300-360.html for you better future

Good Luck

Does anyone knows how is the question drag and drop that sometimes leaves in the exam?
Is about IPV6?????

dear anthony
can you share please the dump please

Can someone share the IPv6 drag and drop question please? I

I downloaded from here:
http://www.freebraindump.com/?s=300-360

fake dumps of freebraindumps Dont go there

I did not find the question in that website and it is not for free for all questions. agree with Anonymous

latest ccnp dumps
http://www.dumpspro.com/ccnp-dumps

I just passed 300-360 on 25/Jan/2018 by learning PassLeader 300-360 dumps (140q), still valid for passing!

Part of that PassLeader 300-360 dumps (140q) are available here:

http://www.ciscobraindump.com/?s=300-360

Good Luck!!!

Hello hamz,

From where are you studying? What material?
I found some questions with worng anwser too!!

Fail the Ryan today … passleader & co is NOT valid!

passed the exam today with prem dev material

there are some active passive concept based questionnaire

and also drag and drop

exam has 60 number of qs and material has 110 qs.. fair enough to prepare in time.

ahmed munir please can you share the dumps please