Share your IUWMS Experience

Hi… Unknown123

Please share 70q dumps so that it will help everyone

hi.. guys

here are some of the correct answers , Please correct if they are still wrong

3) An engineer has run the debug dhcp packet enable command on the wireless LAN
controller CLI. Which field contacts the IP address offered to the client?
A. siaddr
B. ciaddr
C. chaddr
D. yiaddr
E. giaddr

ANS:D
http://www.cisco.com/c/en/us/support/docs/ip/dynamic-address-allocation-resolution/27470-100.html

12) An engineer is concerned about rogue-on-wire and wants to enable port security. Which
guideline must the engineer follow?

A. Configure Switched Port Analyzer destination ports as secure.
B. Use 802 1x with port security to prevent MAC spoofing.
C. Enable port security on dynamic access ports.
D. Employ static MAC address configuration for APs with port security.

D

21) Clients are failing EAP authentication A debug shows that an EAP handshake started and
the clients are then de-authenticated. Which two issues can cause this problem’? (Choose
two.)

A. The clients are configured for machine authentication, but the RADIUS server is
configured for user authentication.
B. The WLC has not been added to the RADIUS server as a client.
C. The WLC certificate has changed.
D. The shared secret of the WLC and RADIUS server do not match.
E. The WLAN is not configured for the correct EAP supplicant type.

BE

17) A wireless engineer has completed the configuration of a new WLAN on the existing Cisco
wireless infrastructure. During testing he found that the wireless client’s authenticate and
received the correct ip address from the switch, but they were not able to access any of the
internal or external resources. Which action will resolve the issue?

A. Configure static ip addresses for the wireless clients.
B. Configure the default-router on the switch DHCP pool.
C. Configure option 82 on the switch DHCP pool.
D. Configure a dns-server on the switch DHCP pool.

B

21) Clients are failing EAP authentication A debug shows that an EAP handshake started and
the clients are then de-authenticated. Which two issues can cause this problem’? (Choose
two.)

A. The clients are configured for machine authentication, but the RADIUS server is
configured for user authentication.
B. The WLC has not been added to the RADIUS server as a client.
C. The WLC certificate has changed.
D. The shared secret of the WLC and RADIUS server do not match.
E. The WLAN is not configured for the correct EAP supplicant type.

BE

22) Which two statements about the WLAN are true? (Choose two)

A. The client has a 5 GHz connection.
B. The client has authenticated.
C. The client is 802.11n capable.
D. The Cisco device is a 3600 series AP.
E. 802 11b data rates are disabled in this WLAN

AB

A — since the client is under channel 136 it should be 5 Gz
B — as in the capture we can see that there are encryted data messages ,
so should be authenticated

C— the client is not 802.11n capable becuase client is already operating the in 6,24 rates
802.11n should be Minimum of 54mbps
D — since there is no 3600 AP
E — Since client is operating in 5ghz , 802.11b doesnt come into picture.

24) A wireless engineer is unable to join lightweight access points to the Cisco Wireless
Controller. The access points receive ip addresses from a DHCP pool configured on the
core switch. Which action must be taken to resolve the issue?

A. Upgrade the Wireless Controller to a newer IOS release.
B. Configure option 43 on the DHCP pool.
C. Configure option 82 on the Wireless controller.
D. Change the management ip address on the Wireless Controller.

B

30) Two 5508 Wireless Lan Controllers are managing all Access Points throughout the network
The WLCs are located in different locations to provide geographical redundancy A Mobility
Group has been configured on both WLCs and has a UP status on both Controllers The
APs m location A are statically configured to use Controller A as the Primary and Controller
B as the Secondary If the WLC in location A goes offline, the APs successfully join the
WLC m location B but they do not failover to their Primary configured Controller What
configuration task will fix this issue’

A. Change the AP Failover Priority to critical.
B. Enable AP Fallback globally on the WLC.
C. Configure the WLC in location A as Primary using the CAPWAP AP Controller IP
Address command on all the location A Access Points.
D. Use DHCP Option 43 and specify WLC in location A as Primary.

B

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/69639-wlc-failover.html#c5

34)A network engineer is troubleshooting why EAP authentication with a client is failing. Which
two commands should be used to resolve the issue? (Choose two)

A. debug dot1x notifications enable
B. debug dot1x events enable
C. debug arp
D. debug aaa detail enable
E. debug aaa events detail enable

BD

38) An engineer is creating a custom rogue classification rule directly on a controller. Which
two conditions are possible when adding a custom rule to a controller? (Choose two.)

A. internal
B. ad hoc
C. client-count
D. duration
E. WLAN
F. open authentication

CD

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110263-rogue-based-rogue-classification.html

39) A VoWLAN has been deployed at a customer site. and users report that audio is choppy in
some areas The exhibit captures a voice exchange between one phone that is associated
to the AP at the end of the corridor (172.31 255 101) and another phone that is positioned
in a conference room nearby. Which action enhances the voice application quality of
experience?

A. Change the basic rate configuration on the WLC to include 54 Mbps.
B. Change the WLAN QoS profile to platinum.
C. Decrease the AP power level.
D. Disable higher data rates on the controller.

B

Keep the right answers coming. I too as Scoot failed the exam. All the 70q dump questions is indeed valid but the answers wrong.

43) A mobile station in a factory contains an AP configured as a work group bridge that
authenticates to a root AP using EAP-FAST. To be able to use the mobile station in further
parts of the factory, another root AP is installed and also configured for EAP-FAST When
the mobile station is attempting to roam to the other AP, it loses connection yet can still
authenticate to the first one. What is the cause for the failed authentication on RAP2?

A. RAP1 is using a different authentication protocol than RAP2.
B. RAP2 has a different SSID than RAP1.
C. RAP1 is using a different encryption than RAP2.
D. The authentication usemame and password is different.

A – check for right answers

44)

AP join request sent
WLAN controller validates AP certificate
WLAN controller sends Join response
AP validates WLAN controller
AP downloads Configuration

53) An AP will be deployed to an area where DHCP Option 43 is unavailable and the WLAN
engineer is unable to have DNS modifications made to support this AP. Which two actions
can enable the AP to join the WLC? (Choose two)

A. Issue the clear capwap private-config command in the AP console.
B. Pre-stage or prime the AP on the same Layer 2 VLAN as the WLC.
C. Issue the capwap ap ip default-gateway WLC IP address command in the AP console.
D. Issue the capwap ap ip address WLC IP address command in the AP console.
E. Issue the capwap ap controller ip address WLC IP address command in the AP console.

AE

I found Below question numbers had wrong answers and I have tried to answer them
Please comment if my answers are wrong

1,3,11,12,17,20, 22,24,30,34,38, 43-check correct anwers, 44, 47- check answer,53, 55, 56

Also passed 642-747 exam yesterday by learning that passleader 642-747 dumps (http://www.passleader.com/642-747.html, 179q), all questions were 100% same & 100% valid.

P.S. Last day to test 642-747: September 21, 2016

hi guys

have anyone who made comment on this forum passed it the new exam. does anyone have study material for the new exam. kindly share if u do have. thanks

You have successfully configured HA and SSO using two Cisco 5508 Wireless LAN Controllers.
You are able to access the Active Primary WLC but are unable to access the Secondary Standby
WLC. Which two methods will allow you to access the standby unit? (Choose two.)

A. Via SSH to the Redundancy Management Interface.
B. Via Service Port Interface.
C. Via SSH to the Management Interface.
D. Via console connection.

Answer: CD (PassLeader)

According Haneen , the answer to is:

A. Via SSH to the Redundancy Management Interface Primary.

Incorrect.

B. Via Service Port Interface.

Incorrect too:

After you enable SSO, you must access both the standby and active controller using:
The console connection
SSH facility on the service port
SSH facility on the redundant management interface

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01110100.html

C and D would be correct.

B appears to be an incomplete answer (lack SSH):

“Via Service Port Interface” vs “SSH facility on the service port”

C appears to be an incomplete answer (lack Redundant):

“Via SSH to the Management Interface” vs “SSH facility on the redundant management interface”

I think is: E. Critical

QUESTION 3

While reviewing CleanAir data in Cisco Prime Infrastructure, an engineer notices that a wideband
jammer is not sending its Interferer Security Trap correctly. The engineer determines that the
default seventy level has been changed.
Which value does the engineer select to reset the seventy level to its factory setting?

A. informational
B. major
C. minor
D. warning
E. critical

Answer: D

http://www.cisco.com/c/en/us/td/docs/wireless/technology/wips/deployment/guide/WiPS_deployment_guide.html

Severity
The severity of aWIPS alarms is set based on its security threat level and operation impact on a wireless production network. For example, for most DoS attacks, they may have an operational impact on the wireless infrastructure. Thus, their severities are set to Critical by default. It is not necessary to change the default severity level, but it can be changed on case-by-case basis as long as thorough investigation and review have been done with InfoSec and Security Monitoring teams internally for customers.

DoS: RF jamming

Hi… Pipe

Thanks for your effort
But for HA and Sso , as described in question primary accessible but secondary not
So this means that secondary can’t be accessible via SSH, so need to think for non remote option

As console is used for cli
Service port is used for GUI access

@Jay
How about this one ?

Which statement best describes how the band select works ?

A. The access point uses the load balancing feature to move the clients to 5 Ghz
B. The access point changes the DTIM period on the 2.4Ghz band
C. The access point recommends the band in the association response to the client
D. The access point ignores and delays the probe request of the client on the 2.4Ghz

Answer = C

I am thinking D is more correct ?

https://supportforums.cisco.com/document/81896/load-balancing-and-band-select-cisco-wireless-lan-controller
(nd selection works by regulating/suppressing probe responses from the clients? 2.4 GHz radio. It makes 5-GHz channels more attractive to clients by delaying probe responses on the 2.4-GHz channels)

@Fleming
it should be C because one of our friend score came high after selecting option as C

@jay is D

@Jay

An AP will be deployed ti and area where DHCP Option 43 is unavailable and the WLAN engineer is unable to have DNS modifications made to support this AP. Which two actions can enable the AP to join the WLC ?

A. Issue the clear capwap private-config command in the AP console
B. Pre-stage or prime the AP on the same layer 2 VLAN as the WLC
C. Issue the capwap ap ip default-gateway WLC IP address command in the AP console
D. Issue the capwap ap ip address WLC IP address command in the AP console
E. Issue the capwap ap controller ip address WLC IP address command in the AP console

Answer A.D

I am thinking all an AP needs is a default gateway and to know the IP of the management interface of the WLC it will join.
and ofcourse an IP address assignet to the AP itself (that is not an option)
I am thinking C & E

Correct me if I am wrong

Send it and I will review it. {email not allowed}

@Flemming

B. Pre-stage or prime the AP on the same layer 2 VLAN as the WLC

E. Issue the capwap ap controller ip address WLC IP address command in the AP console

The capwap ap ip default-gateway is not valid command, only work in hidden menu.

@LL Boo the file demo has wrong answer too.

Guys I have reviewed the material, all these suppliers have wrong answers on the 300-370 60/or70q file. My suggestion is to gather all the corrections that Pipe/Jay &Flemming has done and let us go and write this exam and become CCNP-WL certified once and for all, theres no time to waste time look ccie wireless is waiting for us. Look I also attempted the 300-370 exam last week and failed now I’m going to try it again next week based on the information and the corrections I have made and also got from you.

@ pipe thanks for your reply.

@Jay & @Pipe

Which option indicates poor access point placement ?

A. Excessive number og bytes sent compared to bytes received
B. high signal-to-noise ratio
C. excessive number of data retries
D. low ratio signal strenght indicator
E. duplicate received packets
F. poor statistics for the last 90 seconds

Passleader : C & D

In real test you can only choose 1. Which one is it ?

A mobile station in a factory contains an AP configured as a work group bridge that
authenticates to a root AP using EAP-FAST. To be able to use the mobile station in further
parts of the factory, another root AP is installed and also configured for EAP-FAST When
the mobile station is attempting to roam to the other AP, it loses connection yet can still
authenticate to the first one. What is the cause for the failed authentication on RAP2?

A. RAP1 is using a different authentication protocol than RAP2.
B. RAP2 has a different SSID than RAP1.
C. RAP1 is using a different encryption than RAP2.
D. The authentication usemame and password is different.

Question A is not an option in the real test and the two AP outputs are identical.

Access points ate deployed in an office building and users report that the
real-time communications quality of experience is poor when users walk between the elevators
The elevators are a heavy metallic obstacle, and AP 3 was installed to cover the elevator area,
which AP t and AP 2 signal does not reach Communications are captured for a user walking from
point A to point C. and it is observed that the user iPhone device suddenly scans all bands and
then roams from AP I to AP 3 somewhere between points B and C WLAN is set to 5 GHz only.
Open, default rate configuration.
Which action improves the real-time application quality of experience in this area?

A. Enable 802 11v on the WLAN
B. Enable 802 11r on the WLAN
C. Enable 802 11k on the WLAN
D. Move AP 2 to point B

Passleader Answer: B

The new Access Point by the elvevator cant be reached by AP1 and AP2 meaning no roaming. Another protocol is needed to mitigate this.
From what i found on Apples site I am tending to beleive that C is the right answer.
Please check with me

https://support.apple.com/en-us/HT203068

“For example, if a user is on a call and walks to the other side of the building, the device crosses the -70 dBm threshold and looks for roam targets. Using the neighbor report provided by 802.11k, it knows there are APs supporting the current ESSID on channels 36, 44 and 11. It immediately scans those channels, finds the AP on channel 44 has the appropriate signal strength, and roams. However, without 802.11k the client must scan all of the various channels on each band to find a roam target, adding several seconds to the process.”

Get Download Latest Dumps at below Dumps site Link

https://docs.google.com/uc?authuser=0&id=0BwepsouMuqCjMTV3X2VVd19jZE0&export=download

@ all

Finally, I have created a new vce file for 300-370 exam, with these answers: (A friend passed it with score 871)
https://mega.nz/#!s91SAKAD!I_O6OLjWVkpbwgUxXHLXK8y8D0J6KkslfmkZWYwOcPw

Q1 BC
Q2 E
Q3 D
Q4 C
Q5 D
Q6
239.0.0.0 through 239.255.x.y/16 – Limited Scope
224.0.0.0 through 224.0.0.255 – Reserved link local
224.0.1.0 through 238.255.255.255 – Globally scoped
Q7 B
Q8 A
Q9 A
Q10 A
Q11 BD
Q12 D
Q13 A
Q14 A
Q15 A
Q16 D
Q17 B
Q18 C
Q19 D
Q20 A
Q21 AE
Q22 AB
Q23 D
Q24 B
Q25 E
Q26 B
Q27 D
Q28 B
Q29 AB
Q30 B
Q31 C
Q32 D
Q33 BE
Q34 BD
Q35 A
Q36 B
Q37 ACDF
Q38 CD
Q39 D
Q40 A
Q41 C
Q42 E
Q43 D
Q44
AP join request sent – 1
WLAN controller validates AP certificate – 2
WLAN controller sends join response – 3
AP validates WLAN controller – 4
AP download configuration – 5
Q45 B
Q46 C
Q47 E
Q48 B
Q49 C
Q50 B
Q51 A
Q52 B
Q53 BE
Q54 E
Q55 ABD
Q56 D
Q57 E
Q58 B
Q59 A
Q60 A

Please, share your thoughts.
Best regards,
David SS

Is this passleaders questions ?

Thank you for your effort David

Ops! The Q25 is E and the file vce is wrong.
I will upload a new vce file corrected.
Sorry for the mistake.

David SS

Re David SS,
Really thanks for your hard effort to create the vce file for these wireless tests.
Hope I can take it as practice and pass the exam.
Cheers!

OK. You can download vce or pdf in this link with the Q25 corrected:
pdf: https://mega.nz/#!tstynYSY!VYkmCUsvJ9zO1aG0QIeClItiu6SMjzwCjLu1QeUAjOk
Regards,
David SS

OK. You can download vce or pdf in this link with the Q25 corrected:
vce: https://mega.nz/#!wsVGzSZA!rcIO667EFVATwGBym2GI4Uh6hvSK7urJWnumj3WrSlo
Regards,
David SS

@ all,

Several same questions exist in exam 642-737 and 300-370. The answers are the same except 2:

Question: Refer to the exhibit. A client reports being unable to log into the wireless network. According to the output, which network information should be verified?
300-370 Q45: Answer: that the AP has IP connectivity to the authentication server
642-737 Q231: Answer: the Failed Attempts log on the authentication server

I think the answer is: “the Failed Attempts log on the authentication server”

Question: Clients are failing EAP authentication. A debug shows that an EAPOL start is sent and the clients are then de-authenticated. Which two issues can cause this problem? (Choose two.)
300-370 Q21: Answers:
– The clients are configured for machine authentication, but the RADIUS server is configured for user authentication.
– The WLAN is not configured for the correct EAP supplicant type.
642-737 Q234: Answers:
– The shared secret of the WLC and RADIUS server do not match.
– The WLC has not been added to the RADIUS server as a client.

I think the answers are:
– The shared secret of the WLC and RADIUS server do not match.
– The WLC has not been added to the RADIUS server as a client.

Please, share your thoughts.
Best regards,
David SS

Hi All,

Is that answer of Q11 is A and D?
Because Via Service Port Interface will not be available for 5508?

Thanks.

@NPWirelessL
Only Console and Service Port is available to connect to Standby WLC. (See Cisco Live Presentation BRKEWN-3014)
Correct Answer: BD

Passed 642-747 exam!

Learning all questions from 179q passleader 642-747 dumps (http://www.passleader.com/642-747.html), still 100% valid now!

Good Luck To All!

@David SS
Question: Clients are failing EAP authentication A debug shows that an EAP handshake started and the clients are then de-authenticated. Which two issues can cause this problem’? (Choose
two.)
A. The clients are configured for machine authentication, but the RADIUS server is
configured for user authentication.
B. The WLC has not been added to the RADIUS server as a client.
C. The WLC certificate has changed.
D. The shared secret of the WLC and RADIUS server do not match.
E. The WLAN is not configured for the correct EAP supplicant type.

https://supportforums.cisco.com/document/12572956/8021xeap-troubleshooting
Under troubleshooting 5 and 6
This is from the Radius server, not debug:
If there are failures on the server, the reasons are normally: EAP method not defined or not properly configured on the server or the client, wrong credentials, request is not matching the security policy defined, RADIUS Server has an issue with the external database (if used), RADIUS Server doesn´t know the WLC/AP trying to talk to it (it should be configured as AAA client -NAS- with a valid shared secret), the EAP method defined requires certificates from a CA (at least on the Server) and this is not properly setup… The server logs should normally be clear on the specific reason.

I think it is B&E as you will see both from the debug. Thoughts?

@ all
Today, I passed the 300-370 exam with 895 points.
Questions 57.
Score Pass: 818

My questions and personal answers for studying were:

Q1 BC
Q2 E
Q3 D
Q4 C
Q5 D
Q6
239.0.0.0 through 239.255.x.y/16 – Limited Scope
224.0.0.0 through 224.0.0.255 – Reserved link local
224.0.1.0 through 238.255.255.255 – Globally scoped
Q7 B
Q8 A
Q9 A
Q10 A
Q11 BD. — This question has one option more about SSH via Primary Controller.
Q12 D
Q13 A
Q14 A
Q15 A
Q16 D
Q17 B
Q18 C
Q19 D
Q20 A
Q21 BD
Q22 AB
Q23 D
Q24 B
Q25 E
Q26 B
Q27 D
Q28 B
Q29 AB
Q30 B
Q31 C
Q32 D
Q33 BE
Q34 BD
Q35 A
Q36 B
Q37 ACDF
Q38 CD
Q39 D
Q40 A
Q41 C
Q42 E
Q43 D
Q44
AP join request sent – 1
WLAN controller validates AP certificate – 2
WLAN controller sends join response – 3
AP validates WLAN controller – 4
AP download configuration – 5
Q45 A
Q46 C
Q47 E
Q48 B
Q49 C
Q50 B
Q51 A
Q52 B
Q53 BE
Q54 E
Q55 ABD
Q56 D
Q57 E
Q58 B
Q59 A
Q60 A

It’s not perfect but now I have Certified CCNP Wireless

Best regards,
David SS

@David SS – no worries about score… I was told that nobody cares about that, just the certification. Great job! I hope to be there soon too, have 2 more to go.

Thank you David.
I just took it today, 57Q, 818 pass score.
Finally passed with 895 and certified for CCNP Wireless.

Moreover, Q11, it is now changed to:
A. SSH to virtual interface of secondary controller
B. SSH to redundancy interface of secondary controller
C. via console port
D. via service port
E. SSH to primary controller management interface

@ David SS and team. thanks for all your help.

Could someone please link to the pdf for the 179q dump? Thanks!

I passed and certifacte ccnp ….

The exam 642-747
Prepair CMX and Location basic concepts.

Prepair MSE CLI command and concepts, version 7.6 o higher
Implementation, locate and context-aware
Licensing services.

Some concepts WLC 8.0, 7.0 and 7.2
Techincal mesh implementación.
WLC:
Mobility, rrm, dca, tpc, Hreap , HA Ap sso, N+1, mesh and bridge
Some deploys and tipical case “Cisco style”

WCS Final version technical concepts from Cisco.com

I prepared one strategy with positive result now ccie in comming

According to this document, the answer to the Q26 should be D.
http://www.cisco.com/c/en/us/td/docs/routers/access/wireless/software/guide/RolesWGB.html

QUESTION 26
A mobile workstation in a factory contains an AP that is configured as a workgroup bridge. When the
workstation moves, it loses connectivity and disrupts operation. What can the engineer implement to
minimize roaming problems?
A. Use 802.1X authentication.
B. Use Cisco Centralized Key Management for fast roaming.
C. Use AES for encryption.
D. Use the mobile station command.

Passed 642-747 exam yesterday, 972/1000 marks!

Learned all questions from 179q PassLeader 642-747 dumps: http://www.passleader.com/642-747.html, 100% valid!

p.s. The 642-747 exam will be retired on September 21, 2016, then the exam 300-370, some free 300-370 dumps collection: https://drive.google.com/open?id=0B-ob6L_QjGLpM3ZXaF9TdmZSeUU

Anyone can tell me David SS’s dump still valid? Many thanks!

yes, valid. i passed (918).
https://mega.nz/#!JkND1TZJ!mZuOOW8KlH4AhPP_h7ilH8KAg74Cc45XtUF2aOy1_O0
I changed 2 answers:
26D ( wgb do not support CCKM)
37ACDE (CSE APs were in the CSE-WLANs AP-Group and CSE-WLAN AP Group had only one wrong SSID)

Hi al, when you take the exam?

hi, child,
one day ago