Share your CCNA Wireless Experience

@topper : I had some basic knowledge, so I first read Official certification Guide. Then carefully studied questions from dumps found here ( IMM doc and 437Q) and questions found on previous 20 pages. During this , basiclly I read OCG once more and for some questions I found explanation on Cisco site.I used Cisco site little , just to understand topic from question. If you do not find mentioned dumps here, leve mail and I wil send to you. I have WLC in my company and I just click through it , i couldn’t anything configure.

@DN could you share those questions with me to balloutbro123 @ gmail . com

Just finished the book and i plan on taking test in 2 weeks.
Any other tips would be appreciated as well .

thanks for the help and material DN.
Could you confirm if there are any labs in this exam?

tomskinger at gmail dot com

Hey DN, regarding the questions that you have posted (not the latest ones from your exam). I have done a research and some reproduction in my Lab and here are the results for everyone:

1. Which three items do you need to establish a wireless connection to an enterprise wireless network? (Choose three.)
A.SSID name
B.RF channel
C.RF signal
D.802.1X/EAP credentials
E.pre-shared key
F.web page
G.WPA/WPA2 settings
Answers: A, C and D
To my perspective this are the correct answers since the question is not asking how to enable the 802.1x on our Windows device for example but what we need to establish an Enterprise wireless network.

2. Which three statements must be true for Cisco WLC to support roaming? (Choose three.)
A. Controllers are in the same mobility group.
B. Controllers operate in different LWAPP modes.
C. ACLs are the same.
D. Virtual interface IP addresses are the same.
E. Controllers have different versions of code.
F. Controllers need to have the same hostname.
Answers: A, D, F this is the answer that we get on all dumps and web sites regarding 200-355

3. What does the current European Telecommunications Standards Institute rule state is the 2.4-GHz maximum transmitter output power for point-to-point installations?
A. 16 dBm
B. 17 dBm
C. 20 dBm
D. 30 dBm
E. 36 dBm
Answer: B. I have verified that with the official Video training from Cisco Press and Pearson

4. What is not an option in FlexConnect mode? (choose two)
A. Local authentication, local switching
B. Local authentication, central switching
C. Local switching, central authentication
D. Central authentication, central switching
E. Central authentication, local switching
F. Central switching, local authentication
Answers: B, F
Explanation: according to the Cisco documentation there are some modes on Flex connect. These are A, D and E. C is the same like E so the correct answers are B & F
https://www.cisco.com/c/en/us/td/docs/wireless/ncs/1-1/configuration/guide/NCS11cg/hreap.pdf

5. A customer has completed the installation of an 802.11ac greenfield deployment at their corporate headquarters. They would like to leverage 802.11ac enhanced speeds on the trusted employee WLAN. In order to configure the employee WLAN, what Layer 2 security policies are valid
A. WPA2(TKIP)
B. WPA(AES)
C. OPEN
D. WEP
Answer: C
Explanation: 802.11n and 802.11ac require WMM support, and either Open (no authentication, no encryption) or WPA2/AES-CCMP. WPA2 with TKIP is deprecated, and not supported for 802.11n or 802.11ac. WPA1/AES is allowed for backward compatibility, but is not allowed for 802.11n or 802.11ac.

6. Which three items are allowed on an Ethernet trunk port? (Choose three.)
A. autonomous AP
B. FlexConnect AP
C. local AP
D. monitor AP
E. rogue detector AP
F. sniffer AP
G. SE-Connect AP
H. Cisco WLC
Answer: A, B, E
Explanation: The Rogue Detector is something that you plug into your Switch. Typically put the AP on trunk so that it gets traffic from all the VLANs and if ever a rogue AP, connects to that Switch and is sending traffic out, the Rogue Detector on the Trunk, it is going to see traffic coming from that MAC address. And what it is going to do then as it detects this traffic, it’s going to send that MAC address information to the WLC…

7. A WLAN deployment uses a combination of Cisco Aironet 1260 APs and multiple Cisco 5500 Wireless LAN Controllers to provide wireless LAN access to end- users. The network administrator has decided to use DHCP Option 43 to enable the APs to discover the wireless LAN controllers. When configuring the DHCP scope, which format should be used for the Cisco WLC addresses?
A. a comma-separated ASCII string of Cisco WLC AP-manager addresses
B. a comma-separated ASCII string of Cisco WLC management addresses
C. a comma-separated ASCII string of Cisco WLC virtual IP addresses
D. a hexadecimal string of Cisco WLC AP-manager addresses
E. a hexadecimal string of Cisco WLC management addresses
F. a hexadecimal string of Cisco WLC virtual IP addresses
Answer: E
Explanation: According to Cisco documentation in every server we have to set up the management IP address of the WLC with option 43. In an environment where only Cisco APs are present we can use the hex string of the WLC. In an environment where we have several vendors’ APs we set up the comma-separated ASCII string of the WLC management IP address.

8.Which three WLC debug commands are appropriate to troubleshoot a wireless client that is associated to an AP? (Choose three.)
A. debug capwap
B. debug mac addr
C. debug dot11
D. debug dhcp
E. debug ap
F. debug dtls
Answer: B,C & D

I would also like to ask DN if he has the answers for the latest questions that he had on the exam. Can you please share with us mate? And if you could please provide me the dumps that you have on my email I would be happy to see them as well. My email address is ioannis dot ezwvalis AT gmail dot com

@DN
can you send dump to muhammedeg@gmail-com

latest ccie dumps
http://cciedump.spoto.net/rs-ccie.php
good luck all guys

Finally passed the exam with 95x. I am going to celebrate with some drinks and gonna post the new questions. I got them in full details ;)

@yannis, @centinal, @topper I send you email.

Yannis do you gor drag and drop in your exám and please what are the figure ?

@DN can you share please the dumps with a google drive link
thnx

@DN
Thankyou so much

@Yannis,….can you please share the new questions please…

could any one share me cisco wireless 200-355

ryan5603@gmail(dot)com

please

thank you.

2018 spoto latest ccna dumps
http://cciedump.spoto.net/ccna-wireless.php

Cisco 640-722 Dumps
Cico 200-355 Question Answers
Cisco 300-360 Braindumps
Cisco 300-375 Pdf

Get Cisco certification Dumps at one place. https://www.pass4surekey.com/

Please send me some vce or pdf question regarding 210-255 exam, cyberops.
tai12242010(@)gmail.com

14. Which option describes the major capability of mobility groups?
A. Helping to discover rogue APs
B. Allowing for seamless client roaming only
C. Allowing for seamless client roaming and WLC redundancy
D. Helping to restrict clients to a specific subnet
Answer: I gave C
15. dot11 ssid Guest-01
vlan 10
authentication open
guest mode
A customer has setup an autonomous AP with a single broadcast SSID, on the 2.4GHz radio, and requested that the engineer add an additional SSID to the 2.4 GHz radio. Given the output what should be configured to implement the new SSID.
A. guest-mode under the new SSID
B. dot11mbssid globally and mbssid mode under the SSIDs
C. guest-mode on the dot11 radio interface
D. the new SSID on the 5 GHz radio
16. Which two AP modes support infrastructure MFP? (choose two)
A. Flex Connect
B. Sniffer
C. Local
D. Bridge
Answer: A & C
17. You are testing a new autonomous Cisco Aironet 1260 AP, that has booted for the first time on the existing corporate network, which includes voice, data, and location services. How do you reach the GUI of the AP?
A. HTTPS to 10.0.0.1
B. HTTP to 10.0.0.1
C. HTTP to the DHCP address
D. HTTPS to the DHCP address
Answer: C
Explanation: When a Cisco Aironet 1260 boots for the first time it has by default enabled HTTP but not HTTPS. So answers A and D are not correct. By default, he device will try to get IP settings via DHCP and then default to the 10.0.0.1 /26 address. Since there is an existing infrastructure with voice, data and location services we should be able to get IP settings via DHCP and HTTP to that DHCP address.
18. A customer is concerned about ease of wireless management. Which deployment model requires the highest admin overhead to deploy and manage?
A. Cloud
B. Converged
C. Autonomous
D. Local mode
Answer: C
19. Which statement about a Wireless client connectivity to a network with a hidden SSID is true?
A. The SSID needs to be entered manually and is case sensitive
B. The client must install the 802.1x certificate with encrypted SSID
C. The client will be unable to connect
D. The SSID needs to be entered manually and it is not case sensitive
Answer: A
20. Drag and Drop Question

trunk Connects to access port on an infrastructure Switch
AP Physical connections to the Switched network infrastructure
LAG Used by controller to bundle distribution system ports together
WLC Distribution system ports are usually configured as unconditional 802.1Q ports

Trunk goes to Distribution ports are usually configured as unconditional 802.1Q ports
AP goes to Connects to access port on an infrastructure Switch
LAG goes to Used by controller to bundle distribution system ports together
WLC goes to Physical connections to the Switched network infrastructure

21. Referring to the diagram what is the hope order of the data packets when travelling from client A to B if the APs are in local mode.
Topology
Client A  AP01  Switch  WLC  Switch  AP02  Client B
The correct answer is AP01  WLC  AP02

Hey guys, this are the latest new or changed questions for the exam. Wish you good luck

@ DN got the email thanks again.

@Yannis: Congrats mate!! well done.
was the email info gratefully shared by DN enough to get by the test or extra info needed?

thanks

@ Yannis
what was your answer for No:15 above?

Hey mate my answer for question 15 was B but I haven’t had the time to verify if that’s the correct one

@Yaniss you saved my life, thank you so much!

@Yaniss, Can you please send dump questions, chi_126 AT Hotmail.com

Can anyone confirm if there is a LAB or Drag and Drop on exam?

I passed the exam with 9xx/1000, theres 10 new questions include new d&d

Can you remember what they were about?

Will be taking test Sunday if anyone can provide last minute tips it would be appreciated, ive read the book and whatched videos understand concepts. Th

@Yannis and @DN thanks for the information provided in previous page. I wil be sure to update this post sunday after test so that I can share my experience weather i pass or fail.

Thanks to all who share their experience on here

@centinal good luck for the exam.
@wireless: did you have only 1 DND?
were there any labs?

Why can’t I join your group?

Hello everyone, found this usefull website that has alot of the questions on dumps. Dont know if its fully free but so far ive been going through some question

http://vceguide.com/which-two-pieces-of-information-are-needed-for-the-wireless-client-to-connect-to-the-wireless-network-2/

Looks this on is more recent 2017.. Guys dont pay for dumps people here post but its a scam! half of the time they are no accurate

http://vceguide.com/which-three-items-do-you-need-to-establish-a-wireless-connection-to-an-enterprise-wireless-network-4/

Just one d&d but 10 new question, I can remember one about dipole dish diagram and new convertion from dB

@wireless
was the dnd similar to yannis and DN posted on page 76:
20. Drag and Drop Question

trunk Connects to access port on an infrastructure Switch
AP Physical connections to the Switched network infrastructure
LAG Used by controller to bundle distribution system ports together
WLC Distribution system ports are usually configured as unconditional 802.1Q ports

Trunk goes to Distribution ports are usually configured as unconditional 802.1Q ports
AP goes to Connects to access port on an infrastructure Switch
LAG goes to Used by controller to bundle distribution system ports together
WLC goes to Physical connections to the Switched network infrastructure

21. Referring to the diagram what is the hope order of the data packets when travelling from client A to B if the APs are in local mode.
Topology
Client A  AP01  Switch  WLC  Switch  AP02  Client B
The correct answer is AP01  WLC  AP02

CRTJ,
Congrats, can you send me the 411Q and pdf? ctugrad08 @ gmail.

or tell me where I can find it? Is it on this forum?

thanks!

Anybody have recent dumps?
Thanks!

Dumps can be found on page 65ish
I will test out this weekend and share questions and dumps with eveyone

Hi Centinal. Link is not valid on page 65. So Please can you share it again if you have.

Help!!!

When using multiple SSIDs on a Lightweight AP, how does the traffic of each SSID reach the 802.3 network?
A- porvide routing between them at the core so that the SSIDs can reach the network
B- Configure 802.11 trunking on the ethernet switch por thtat is connected to the AP
C-configure ACLs at the switch port that will allow all desired SSIds to pass traffic
D- configure the SSID on the WLc and it will regulate the traffic based on traffic type

Dump says answer is B, however i think its A because LAPs dont need a trunk port since bc they user their management vlan to create a CAPWAP tunnel to the WC and that is used to send user traffic right? there fore there is no need for a trunk bc the AP will no actually use any other vlan to talk back to the controller

Hi all, passed my exam today

Saw new question about

What ap would do if it connects to a 802.11af PoE switch
A.go into disable mode capwap
B.x
C.
D.x

Cant remeber the rest of the choices. All questions within 15 pages are valid on exam

well done centinal, congrats.

did you have a DND, is the same as the above post?
no labs i presume?

No labs and yes same DnD

Also had questions on radiation pictures it was a yaggi and parabolic dish

Hi can any one give me a link or study material book? plz reply on {email not allowed}

I am very thankful to pass4surekey to help in ccna 640-722 exa.His 640-722 dumps are really helps me to pass my certification exam, i wish you guyz take advantage from pass4surekey. https://www.pass4surekey.com/exam/200-355.html

Thanks for that centinal,
I’m a little confused about the organization of the DND.
can you help me understand the layout?

20. Drag and Drop Question

trunk Connects to access port on an infrastructure Switch
AP Physical connections to the Switched network infrastructure
LAG Used by controller to bundle distribution system ports together
WLC Distribution system ports are usually configured as unconditional 802.1Q ports

Trunk goes to Distribution ports are usually configured as unconditional 802.1Q ports
AP goes to Connects to access port on an infrastructure Switch
LAG goes to Used by controller to bundle distribution system ports together
WLC goes to Physical connections to the Switched network infrastructure

2018 latest CCIE Dumps
freeciscodumps.com/rs-ccie.php

dumpsgator provides the most updated Implementing Cisco Wireless Network Fundamentals 200-355 exam question answers dumps here: https://dumpsgator.com/download-200-355-braindumps-questions.html

@Topper

The answers are

Trunk ————- Distribution ports are usually configured as unconditio 802.1Q ports
AP ——————Connects to access port on an infrastructure Switch
LAG —————- Used by controller to bundle distribution system ports together
WLC ————- Physical connections to the Switched network infrastructure

This is the defenition that u must match thw word with