Share your CCNA Wireless Experience

Hi guys,

Can someone kindly send me the latest dumps of the new exam as well?
anishtain.h2006@gmail.com

I will pass the favor by forwarding it to the new people.

Thanks a lot in advance.

Guys, old dumps are not valid anymore.
I got new valid February 2016 dumps from here: http://cutt.us/e4z4u

Can someone kindly send me the latest dumps of the new exam as well?
send a link here afarsoldier21@hotmail.com
Thank you in advance

my dear friends please do not wast of time by giving invalid URL to download dumps

@dumpnew23 why you are wasting time ? by giving invalid URL,

@sikorka
Can you please send me the latest dumps?
Gunner9312@yahoo.com

sikorka
Could you please send me the latest dumps? Thanks
dsg337@gmail.com

Could please any one share 200 – 355 dumps to examwirless@gmail.com

Could please any one share 200 – 355 dumps to examwireless@gmail.com

Guys, passleader 375 dump IS NOT VALID. Exam has more then half of new questions, some I remember: which 5GHz range give you permission for highest power. Question about Cisco Prime licensing (4AP, 98 clients, how many base licenses and how many additional), question about 802.3af PoE for some specific AP model and how it will behave on it, there was also question about absorption, scattering, reflection and examples of each, then, which radio is 802.11b on AP 12XX. Radio0 or Radio1. Anyhow millions of new questions.

Passleader has updated dump. Anybody knows if there are some new questions? I would buy it if there are.

Passleader doesn’t have any new questions, do not buy it. I have subscription, when I see updated dump I’ll update. Current dump is not valid.

Misha do you have answers to those questions, I have taken exam and failed those were the questions that stumped me. the last radio question , if you want to disable 802.11b what do you do – you shutdown the radio0 interface as this is for the 802.11b/g/n 2.4 ghz

I also flunked it…

I had question about link budged. TransmitterX >> -4dBm (cable) >> +2dBi (antenna) ————- +2dBi (antenna) >> -4dBm (cable) = RRSI – 48dBi. I think something like that.

One was about OSI level and 802.11.

anyone tried the dump from pass4sureexam – they got a dump which was updated on 15th february –

I do not believe anyone has them at this point as they would relatively fast get to other providers, even though question is valid. If someone can confirm status of pass4sure that would be gr8.

Hi Sikorka
Could you please send the latest dumps of 200-355 dumps to {email not allowed}.

Thanks in advance

Hi Sikorka
Could you please send the latest dumps of 200-355 dumps to {email not allowed}

Thanks in advance

Hi Sikorka
Could you please send the latest dumps of 200-355 dumps to {email not allowed}
Thanks in advance

Hi guys, can you please share the 200-355 dump with me too at {email not allowed}

thanks and regards

Hi guys, can you please share the questions with me too at {email not allowed}

thanks and regards

Can someone kindly send me the latest dumps of the new exam as well?
{email not allowed}

Could please any one share 200 – 355 dumps to {email not allowed}

Don’t you read? There are no valid dumps. To all others, post your questions you still remember.

If anyone has the dump from Sikorka, please sent to {email not allowed}

Hi,
Can someone please send me the latest dumps of 200-355 to {email not allowed}?
Thanks

I took my 200-355 exam yesterday and failed. I came across an question reg license, something like how many license needed for 97 AP’s and 4 WLC.

Guys, anybody knows to which interface on the AP and on the WLC IPv6 can be applied. I would say management and Service. What is the state of the AP?

I would say like this: Absorption – walls (taking power out of the wave); Reflection – Metal (multipath), Scattering or diffusion – should be when passing trough uneven materials (leafs, moving water, surface roughness, dusty or humid air), Refraction – from two materials different density (hot – cold air, air – water)

Controller Configuration for IPv6 Support

Controller configuration for the native IPv6 support is similar to that of the IPv4 controller with the exception of the few interfaces accepting the IPv6 addresses as demonstrated in the following examples:

■Management solution supports one IPv6 address (+ LLA address).

■Dynamic interfaces support only IPv4 addresses.

■Dynamic AP manager supports only IPv4 addresses.

■Redundancy management/Redundancy port (HA interfaces support IPv4 only) supports only IPv4 addresses.

■Service-port can get an IPv6 address statically or using SLAAC (Only SLAAC interface is supported on the WLC).

■LAG is required for IPv6 AP load balancing.

DHCPv6 Proxy is not supported on dynamic interfaces (Only IPv6 DHCP bridging is supported- like 7.6 legacy).

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/IPV6_DG.html

Please can someone send the 200-355 dumps?

Are there New Dumps? Please update or send, “{email not allowed}”

I got new valid dumps from www(dot)dumps(dot)dx(dot)am
Lots of new questions there.

Jester, like what? Well, I know the answer, you have no idea but…

@Sikorka please share the 200-355 dump at {email not allowed}
anyone who has the dump please share.

Guys, one note about multipath. MRC in 802.11n is mainly on the inbound path and is here to make some good out off shity signal while beamforming will use multipath in a way to form upfade on the receiving side.

A lot new question updated in 200-355:
– how many data subcarriers OFDM
– license for Cisco Prime Infrastructure if you have 4 controllers & 97 APs
– 20Gbps uplink requirement and choose controller such as: 5710 ….
– IEEE 802.11 operating in which two OSI layer
– Connect controller to switch. Which two option must be done: interface/cable type
Others new question as above comments.

Please send me new dump if you have latest dump via scoutceline@ gmail

Thanks,

Scout THNX for the update.

48 data sub carriers in OFDM
Licensing: 1 base 125 lifecycle (I think)
5520 has 20Gbps troughtput, 5760 60Gbps. Also 8500 40 Gbps.
Data and Physical
Interface and cable, I’m lost in this one

Scout, as soon as I receive something new I’ll forward to you.

Looks like my email got removed by the board.

If anyone has valid dumps, please send to emerica37@ yahoo

Has anyone tried the Actualtests dump? They only have 65 questions, no sim and no drag and drop.

LUKE,

Lifecycle licenses are available in bundle sizes of 25, 50, 100, 500, 1000, 2500, 5000, 10,000, and 15,000.

I think it is 1 base and 500 lifecycle.

Hm, I’m not sure, my logic went like this: One bundle of 25lics + one bundle of 100lics. I don’t think you must by them in sequential order…

Guys, read this page it will be of gr8 help. http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1130-ag-series/white_paper_c11-516389.html

Specially note: 802.11n systems take advantage of multipath by sending multiple radio signals at the same time. Each of these signals, called a spatial stream

The Actual Test dump was not enough to pass the test. I think only 25-30% of the questions actually showed up on the test.

Hi guys, Could you please send the latest dumps of 200-355 dumps to me via
{email not allowed}
Thanks,

Hi guys, Could you please send the latest dumps of 200-355 dumps to me via
{email not allowed}
{email not allowed}
Thanks,

Hi guys, Could you please send the latest dumps of 200-355 dumps to me via
luiz_guilherme.21 @hotmail. com
Thanks,

I had my test booked for this Friday but I just pushed it back to March 25th. I read the book and work on this equipment daily but I am going to wait until more info about the test is out there.

Looks like my email got removed by the board.
If anyone has valid dumps, please send to

luiz_guilherme.21 @hotmail. com
Thanks,

Anyone has tried the 342q dump?someone can share it using Mega or other services?