Share your CUWSS Experience

I passed today.

Dear Sinonimo congratulations for having passed your test. I wonder if you can share me the material that you helped pass this test or to achieve a valid pass dump my mail is {email not allowed}, because I have already given 3 times and still can not pass.

Beforehand thank you very much.

Dear Anonymous congratulations for having passed your test. I wonder if you can share me the material that you helped pass this test or to achieve a valid pass dump my mail is mahrinska @ hotmail . com, because I have already given 3 times and still can not pass.

Beforehand thank you very much.

Hi Anonymous, congrats!! Did you get any other questions than we didn’t discuss before? Please copy me as well in your mail to Meredith, at martijn_p @ hotmail . com Thanks!

New 642-732 Exam Questions and Answers Updated Recently (11/Mar/2016):

NEW Q1
What is the attenuation of a wireless signal that passes through a cider block wall?

A. 3 dB
B. 4 dB
C. 6 dB
D. 12 dB

Answer: B

NEW Q2
After installation of a new data-only wireless network, an engineer found that RRM has set all of the APs to a power level of 1. Which option describes the reason for this?

A. APs are too far apart for the set data rates.
B. EDRRM is enabled.
C. APs should be manually set initially.
D. TPC needs to be enabled.
E. DTPC value is set too high.
F. High co-channel interference exists.

Answer: A

New 642-732 Exam Questions and Answers Updated Recently (11/Mar/2016):

http://www.vce4shared.com/mar-2016-dumps-practice-passleader-new-197q-642-732-dumps-to-pass-exam-quickly.html

P.S. These New 642-732 Exam Questions Were Just Updated From The Real 642-732 Exam, You Can Get The Newest 642-732 Dumps In PDF And VCE From — http://bitly.com/642-732-exam (197q)

Good Luck !!!

Congratulations Anonymous! Must feel great! :)
Bolleboos / Meredith, did you get an email for further materials?
Thanks for posting and sharing Cyrus!

oops, forgot to sign above comment.
Meredith / Martijn, I just sent you an email .. hopefully you get to read them soon this weekend.
I have to sit my exam on Monday, seriously need to pass or else I lose all the CCNP status I have worked so hard to maintain for the past 10 years! ;'( ML.

Hi, Anonymous, congrats to you on passing the exam. some people i know have taken the exam recently too and failed it. would you mind sharing the material you used to me? einsatzgruppen1023 at yahoo dot com

@Cyrus

Cool boy or girl!!! Those new questions were all appeared in my 642-732 real test on 11/Mar/2016, but I failed the exam!

And, can you please share that valid 197q dumps with me?

Thanks a lot!

Hi Anonymous, I got your e-mail but unfortunately I didn’t receive any additional questions besides the ones that Cyrus posted. I hope you’ll pass! I’m in the same recert. struggle :-(

@Cyrus: Thanks a lot! These questions are exactly in-line with the ones I got at the first try. Any idea how to obtain the questions before nr. 168?

@Cyrus

do you have any link for the new 642-747 ?

i can check and verify since i took it recently ?

if so please send to my email haneenqaderi AT yahoo.com

Hi, I got a question… from the dumps there is one question like this
QUESTION 12
Which option lists the non-overlapping channels in the ETSI domain?
A. 1, 6, and 11
B. 1, 5, 9, and 13
C. 1, 5, 9, 13, and 14
D. 1, 5, and 9
E. 1, 6, 11, and 14
Answer: A

I believe the answer is B. coz it doesnt say in the question standard or common practice, which if it is stated, answer would be A. could someone enlighten me on this?

@ greenie
i guess its A because it doesnt state which 802.11 standard you have.
B would be wrong if you use b standard with 22MHz width.
only if you only use g/n standard with 20MHz width B would be right.

but its a tricky question :)

Hello. Congrats to everyone who managed to pass the exam. Can someone share with me the new dump (vic_bor AT yahoo.com) ? Thank you

@budong, I’ve answered B in this question because what is written in the Quick Reference:
The ETSI used the second definition (30-dB isolation) to determine up to four nonoverlapping channels (1, 5, 9, and 13)channels when used indoors (with outdoor power levels differing). This creates a 20-MHz channel separation and is acceptablefor OFDM networks (20 MHz wide), with a higher noise floor than the 1, 6, 11 model. For compatibility reasons, it is common to see only channels 1, 6, and 11 in use in an ETSI network. (WiFi cards set for the A domain would not detect APs on channels 12 or 13.). Networks that need a low noise floor (for example, VoWLAN) also force the designers to use 1,6, and 11 only.

yeah I agree this is a tricky one, so what could be the answer?

Has anyone passed the exam using the new dumps from PassLeader 197q or from ExamCollection 196q

I have 33 new questions for 642-732.
repartidor @ yahoo.es

i have new dump 642 732 if any one want to get it contact me nshazgui @ ebttikar . com

I’ve created a new vce file, can anyone confirm/verify it for me?

https://drive.google.com/file/d/0B3_aiPTlfg5-SWN6UVExb1JTVjg/view?usp=sharing

great learn videos for 642-732 !

https://www.youtube.com/watch?v=_ANbJpPg4NM&list=PLrErl6_w0E9OL_D_5zyzMRpqQVKpXFcWZ

I found some differences between dumps from Passleader with 198q and “642-732 – 190q – Michael.vce” (wirelessstut). What do you think about the correct answers? Please, note:

QUESTION 190 (179)
Which option lists the non-overlapping channels in the ETSI domain?
A. 1, 6, and 11.
B. 1, 5, 9, and 13.
C. 1, 5, 9, 13, and 14.
D. 1, 5, and 9.
E. 1, 6, 11, and 14.

Passleader Answer: A
642-732 – 190q – Michael.vce Answer: B

QUESTION 160 (184)
Which hop count is Cisco’s maximum recommended for a client in a wireless Mesh network?
A. 2
B. 4
C. 6
D. 8

Passleader Answer: B
642-732 – 190q – Michael.vce Answer: D

QUESTION 185 (170)
The customer requires connectivity between two buildings that are 100 meters apart. Which type of antenna is suitable for this installation?
A. Parabolic antenna.
B. Patch antenna.
C. Dipole antenna.
D. Sector antenna.

Passleader Answer: A
642-732 – 190q – Michael.vce Answer: B

QUESTION 186 (169)
An engineer is adding APs to an existing VoWLAN to allow for location based services. Which option will
the primary change be to the network?
A. Increased transmit power on all APs.
B. Cell overlap would decrease.
C. Moving to a bridging model.
D. AP footprint.
E. Triangulation of devices.

Passleader Answer: D
642-732 – 190q – Michael.vce Answer: E

QUESTION 187 (183)
A customer is experiencing slower client data throughput than the data rate setting. Which two wireless characteristics are the primairy contributing factors? (Choose two.)
A. Broadcast and multicast are sent at the lowest associated data rate.
B. All clients on a given access point share the bandwidth of the channel.
C. Lower data rates decrease overall throughput.
D. Clients that are farther from the access point connect at a slower data rate.
E. Overlapping channels cause co-channel interference.
F. 802.11 acknowledges all packets, which halves throughput on the channel.

Passleader Answer: B,F
642-732 – 190q – Michael.vce Answer: C,D

QUESTION 189 (162)
A customer wants to trade in older 802.11 a/b/g access points for new 802.11n access points. What must be considered before deploying new 802.11n access points?
A. New APs should bundle channels 1, 6, and 11 to increase throughput to 150 Mbps
B. 5-GHz coverage is needed when expecting 300-450 Mbps client link
C. Fewer APs are needed because 802.11n runs on a different radio frequency
D. Fewer access points are needed because 802.11n has better coverage

Passleader Answer: B
642-732 – 190q – Michael.vce Answer: ¿A?

QUESTION 190 (168)
An engineer needs to perform a site calibration using Cisco WCS. Which two types of data collection can be used? (Choose two.)
A. Area point
B. Location point
C. Radius point
D. Linear point
E. Data point
F. Hybrid point

Passleader Answer: D,E
642-732 – 190q – Michael.vce Answer: B,D

QUESTION 193 (181)
An engineer is planning for a 24 Mbps data rate for a new installation. If the environment and other factors
are not taken into consideration, what is the coverage area from the AP?
A. 40 feet
B. 225 feet
C. 80 feet
D. 100 feet
E. 150 feet

Passleader Answer: C
642-732 – 190q – Michael.vce Answer: B

QUESTION 198 (166)
An engineer installed a Cisco Aironet 1400 Wireless Bridge as a central bridge. Which is the maximum
power setting for a point-to-multipoint link?
A. 13 dBm
B. 22 dBm
C. 24 dBm
D. 12 dBm

Passleader Answer: D
642-732 – 190q – Michael.vce Answer: C

@David SS

Hi, some answers are not correct of Michael!

I just passed the 642-732 exam yesterday, and I have confirmed that all new questions were came from passleader 642-732 dumps, but some answers need to be corrected in it!

No doubt that PassLeader has updated its 642-732 dumps with new questions!!!

Good Luck!

@Chris Jacob
Greetings!
What answers need to be corrected in passleader dump?
Could you explain it?
Thanks

ipassed today i confirmed that passleader dumps 100% valid all new questions were came from passleader 642-732 dumps are correct …. good luck for all any support mail me at nshazgui @ ebttikar . com

Hi Nour,

Congrats on passing your exam.

I would appreciate if you can share dumps with me thanks.

olaolu1111 @ yahoo . com

Thanks in advance

Hi Guys,

642-732 198q passleader dumps still valid.

I passed today with 967/1000.

I had 5 or 6 new questions.

Goodluck

I need take this for revalidate. Please send pass leader 198 to certi.fication (at) lycos.com
I thank you

Someone can tell me if the pl 234q is valid? I’m thinking of buying?

PassLeader 642-732 PDF dumps (NEW QUESTIONS for free in it):

https://drive.google.com/open?id=0B-ob6L_QjGLpfmR0dmNXVXotckJaY3JNdEl6U1hadkRROXhOQlROZnQ0RjA0MHdDT09zUjg

Hi Nour, Ola
can u please send me the passleader dump on 20cisco11 (at) gmail.com
thanks a lot in advance

hi,
yesterday I did not pass this Exam ,
I prepare with prep4sure.com …
but I did not get the update…
my score were 756 …

prep4sure.com are sure to pass examination ????

Good afternoon, can some please send me the latest dumps ? wirelessplease (At) gmail.com
Thank you very much

@Ang Soon

Wow, cool guy! Thanks for your kindly sharing!

I just passed the 642-732 exam by learning that passleader 642-732 dumps (FULL VERSION VCE and PDF here: http://www.passleader.com/642-732.html), 100% valid and all new questions were from it!

Thanks a lot! And, good luck to all!

I will try the exam next week.. Thanks for sharing, although I cannot agree with all answers above. For instance: “experiencing slower client data throughput” question is definitely not F.. Acknowledging a large packet will not halve the throughput.. Anyway, thanks for all input, you guys are great!

i

I have certkingdome file 193q&a. {email not allowed}

w i r e l e s s t u t a t h o t m a i l c o m

I give it free.

h t t p : / / w w w . c e r k i n g d o m . c o m / e x a m . p h p ? i d = 3 0 0 8

642-732 PDF dumps for free on Google Drive:

https://drive.google.com/open?id=0B-ob6L_QjGLpfmR0dmNXVXotckJaY3JNdEl6U1hadkRROXhOQlROZnQ0RjA0MHdDT09zUjg

So has anyone here taken the test in the last week or so????
Is this stuff valid?????

can anyone provide the passleader dumps free? Way too much money to pay for them. Can anyone validate those or certkingdom?

Hi

can u please send me the passleader dump on javier.medrano 84 at latinmail . com

thanks a lot in advance

passleader dumps to x2104_reg @ outlook.com please and thank you, anyone taken CUWSS lately?

Some new 642-737 exam questions here: https://drive.google.com/open?id=0B-ob6L_QjGLpfnZENGNfSThtRm5uSTFFRUhXYmtZQTRQS2lpUDkxZ2hGZlBKamQ1U0dYUVU (NEW questions are available in it)

Also, new 642-742 exam questions from Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfndMMGVUSFd4QjI0QVBWME1HcC1hSVVhdG9PNnNUYmc2OUZ2c21YbnZHdnc