Share your WISECURE Experience

hi guys no news about 300-375 exam ???

Part of VALID PassLeader 300-375 dumps for your reference:

http://www.ciscobraindump.com/?s=300-375

Good Luck!!!

Hi Any one have dumps 4 that

New 300-375 Exam Questions and Answers Updated Recently (21/July/2017):

NEW QUESTION 61
Which attribute on the Cisco WLC v7.0 does RADIUS IETF attribute “Tunnel-Private-Group ID” assign?

A. ACL
B. DSCP
C. QoS
D. VLAN

Answer: D

NEW QUESTION 62
Which three WLAN polices can be controlled by using the Cisco IBNS on the Cisco WLC and Cisco Secure ACS? (Choose three.)

A. QoS setting
B. VLAN
C. EAP type
D. ACL
E. authentication priority order
F. NAC state

Answer: ABD

NEW QUESTION 63
An engineer is securing the wireless network from vulnerabilities. Which four strategies are recommended for mitigation? (Choose four.)

A. MFP
B. identity-based networking
C. rogue location
D. EAP-TLS
E. guest monitoring
F. RF profiles
G. rogue detection
H. password policies

Answer: ACEG

NEW QUESTION 64
Refer to the exhibit. A client reports being unable to log into the wireless network, which uses PEAPv2. Which two issues appear in the output? (Choose two.)
……

A. There is a problem with the client supplicant.
B. The AP has the incorrect RADIUS server address.
C. The AP has lost IP connectivity to the authentication server.
D. The EAP client timeout value should be increased.
E. The authentication server is misconfigured on the controller.
F. The authentication server is misconfigured in the WLAN.

Answer: AD

NEW QUESTION 65
When using the Standalone Profile Editor in the Cisco AnyConnect v3.0 to create a new NAM profile, which two statements describe the profile becoming active? (Choose two.)

A. Selects the new profile from NAM
B. Selects “Network Repair” from NAM
C. Becomes active after a save of the profile name
D. Ensures use of “configuration.xml” as the profile name
E. Ensures use of “config.xml” as the profile name
F. Ensures use of “nam.xml” as the profile name

Answer: BD

NEW QUESTION 66
Which feature should an engineer select to implement the use of VLAN tagging, QoS, and ACLs to clients based on RADIUS attributes?

A. per-WLAN RADIUS source support
B. client profiling
C. AAA override
D. captive bypassing
E. identity-based networking

Answer: C

NEW QUESTION 67
How should the Cisco Secure ACS v4.2 and the Cisco WLC v7.0 be configured to support wireless client authentication?

A. The WLC configured for RADIUS and the Cisco Secure ACS configured for RADIUS (Cisco Airespace)
B. The WLC configured for RADIUS and the Cisco Secure ACS configured for RADIUS (IETF)
C. The WLC configured for TACACS+ and the Cisco Secure ACS configured for TACACS+ (Cisco Airespace)
D. The WLC configured for TACACS+ and the Cisco Secure ACS configured for TACACS+ (Cisco IOS)

Answer: A

NEW QUESTION 68
Clients are failing EAP authentication. A debug shows that an EAPOL start is sent and the clients are then de-authenticated. Which two issues can cause this problem? (Choose two.)

A. The WLC certificate has changed.
B. The WLAN is not configured for the correct EAP supplicant type.
C. The shared secret of the WLC and RADIUS server do not match.
D. The WLC has not been added to the RADIUS server as a client.
E. The clients are configured for machine authentication, but the RADIUS server is configured for user authentication.

Answer: CD

NEW QUESTION 69
……

P.S. These New 300-375 Exam Questions Were Just Updated From The Real 300-375 Exam, You Can Get The Newest 300-375 Dumps In PDF And VCE From — https://www.passleader.com/300-375.html (77q VCE and PDF)

Good Luck!

passed today got 900+
i prepared material of 75q provided by premdev

Hi, @ming ching – can you please share those dumps?

@ming ching thanks a lot. and this forum. i cleared my exam with the information provided by ming ching

We have All Dumps on this site

CCNA , CCNA Security , CCNA Voice , CCDP , CCDA , CCNP , CCIE

CCNA & CCNP Wireless 100% Valid Dumps Available Here PDF + VCE Both Files

Open Link
https://1drv.ms/w/s!AqDA6xjtu94KhWY99UuruAJLAWNL

Hi all

Can someone help me with a link for Cisco ISE

hi ming ching cn you please share the questions

@rock

due to some scurity policy i cant share material. and sorry for that

@ming ching

leave the forum immediately. your please is not here.

There are nothing about 200-355.

Hi,
I think that the answer for this question is wrong:

When a wireless client uses WPA2 AES, which keys are created at the end of the four-way handshake process between the client and the access point?

A. AES key, TKIP key, WEP key
B. AES key, WPA2 key, PMK
C. KCK, KEK, TK
D. KCK, KEK, MIC key
answer: A

right answer for me is: D

what do you think about it

I will post other questions later

Latest dumps are available at
http://www.dumpsforsure.com/cisco.html

hi everyone just cleared my exam 300-075
got the material form premdev and i cleared my exam.

before 2 day i cleared 300-360 also from the same source

Can someone share some feedback for 300-375, some new questions…suggestions…

@simba
Contect premdev might be he will help you. I am looking for same material but premdev price is little high

hi, we are No.1 Online CCIE training Company all over the world with highest Passing Rate, we train for CCIE R&Sv5 and CCIE SPv4, CCNA & CCNP Security, CCNA & CCNP Datacenter, Vmware Trainings. Our Students Pass the Lab exam with kNOWLEDGE & by learning Technologies for the first 4 months and than for the last 2 months, we focus on the real labs as we have verified solutions for real labs, we have highest passing rate for CCIE SP and R&S, you can contact us at expert.ccie.4133 at gmail.com

i am arshad dhuna i want money from all of you and want more and more money
i am running away from cisco because they are behind me. i took my ccie number and mobile number off from cisco. but i am number one all over the world. i want to earn money from innocent people and they dont know how i am earning money by making fool them

Doez premdev give the correct answer?

Hi, anyone know hows to buy and contact premdev?

wireless exp. you can search on google with name of premdev dumps, he has facebook account with red ccie symbol. can anyone share the material who bought from premdev?

Who someone tell me that where is premdev URL?

Hi all
I just want to say who shared their experiences i passed mu exam. And i am not afraid to share the name of premdev. Because i tried passleader/ brain Dumps/ pass to lead
But i didnt sucess with them.

Passed yesterday with premdev material. Thanks to this forum

Here the PassLeader 300-360 dumps FYI:

http://www.ciscobraindump.com/?s=300-360

(94q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

Also, part of free PassLeader 300-365 dumps are available here:

http://www.ciscobraindump.com/?s=300-365

(71q dumps, updated recently!!!)

Good Luck!!!

More, part of free PassLeader 300-370 dumps FYI:

http://www.ciscobraindump.com/?s=300-370

(115q dumps, just updated recently!!!)

Good Luck!!!

And, part of free PassLeader 300-375 dumps FYI:

http://www.ciscobraindump.com/?s=300-375

(77q dumps, just updated recently!!!)

Good Luck!!!

cant understand why the 300-XXX exam changed a lot this time? this certification is hard to get https://www.examgood.com/CCNP-Wireless.html

hi, where can I found premdev material?

Hi All,

I took WISECURE yesterday and managed to pass.
I really thought I failed till the very end of the exam, I am sure the subsection weight score is what saved me from failing.
Non of the dumps in the market are valid so don’t think of wasting your money on them.

Only way to pass this exam is study and do some hands on which really saved me. Please pay attention to following topics.
All EAP types, processes, MFR in detial, SNMP v3 configuration, Autonomous AP confiugration for radius, ISE profiling, Prime reporting on WIPS

2x DD ( 1 about EAP types and anotherone about WIPS types)
2x Simulations ( 1st about WPA2-PSK SSID config and 2nd about Guest SSID troubleshooting sceneario)

NEW QUESTION 115
You are planning the coverage for wireless VoIP by using Ekahau. Which signal strength does Ekahau recommend using for VoIP?

A. -84 dBm
B. -76 dBm
C. -67 dBm
D. -53 dBm

Answer: C
Explanation:
Each vendor has their own recommended signal strength for a given data rate or application. For instance, one vendor may recommend designing their VoIP solution at -67 dBm (perhaps the most widely-used value for VoIP deployment if I had to choose one), while another may say -70 dBm. In most cases the values will differ only by a couple dB.

NEW QUESTION 116
A wireless engineer is hired to design a network for six buildings with a WLC in each building to support the access points. Which type of wireless architecture is being used?

A. distributed deployment
B. autonomous deployment
C. unified deployment
D. centralized deployment

Answer: B

NEW QUESTION 117
You must upgrade a data-based wireless network to support Voice over Wireless. Which RSSI measurement do you use to redesign the wireless network?

A. -65 dBm
B. -72 dBm
C. -75 dBm
D. -67 dBm

Answer: D

NEW QUESTION 118
A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?

A. 802.11r
B. 802.11w
C. 802.11i
D. 802.11k

Answer: D
Explanation:
You can optimize roaming for non-802.11k clients by generating a prediction neighbor list for each client without sending an 802.11k neighbor list request. When prediction based roaming enables a WLAN, after each successful client association/re-association, the same neighbor list optimization applies on the non-802.11k client to generate and store the neighbor list in the mobile station software data structure. Clients at different locations have different lists because the client probes are seen with different RSSI values by the different neighbors as the clients usually probe before any association or re-association. This list is created with the most updated probe data and predicts the next AP that the client is likely to roam to.

NEW QUESTION 119
Which option is an advantage at using Cisco CleanAir technology in your wireless network?

A. CleanAir can be used on an AP in monitor mode so that the AP serves client traffic and monitors for interference simultaneously.
B. A single CleanAir AP can be used to analyze RF traffic from many Aps.
C. CleanAir is a software feature that can be added to arty AP to start monitoring interference and air quality.
D. CleanAir operates 24/7 and constantly monitors for interference and air quality issues.

Answer: D
Explanation:
An advantage of CleanAir technology is that it operates 24/7, constantly monitoring for interference and air quality issues. This allows IT to take a more proactive approach to spectrum management. Instead of waiting for interference to be reported by an end user (in the form of a trouble ticket) and then dispatching a tool to analyze the problem, IT can find interference as soon as it occurs and take immediate action. Having a 24/7 history also makes it possible to look back in time. Using historical data, it’s easy to perform analyses of trends over time.

NEW QUESTION 120
You are designing a wireless network to support high user density in the 5 GHz spectrum. Which option is the benefit of selecting a channel width of 20 MHz instead of selecting a higher channel width?

A. increased bandwidth
B. increased throughput
C. decreased co-channel interference
D. decreased speed

Answer: C
Explanation:
If forced to reuse 5 GHz channels, more consistent results will be delivered using strictly 20 MHz channels and avoiding loss of efficiency due to CCI.

NEW QUESTION 121
……

The new 300-360 dumps (Dec/2017 Updated) now are available, here are MORE 300-360 exam questions (FYI):

Good Luck!!!

updated the latest wireless ccnp dump :
http://cciers.spoto.net/cciewire.html

@khawar please contact me by email i need your help nshazgui @ ebttikar . com
thank you

Passed today with 70q material
Before this i cleared 360 and now 375 i used the same vendor called premdev for both and now going for ccie…. premdev helped me through out the exma. And i recomend it because i cleared 2 exam by using his material…. best of luck

you PS

Any news here? Share your experience guys …

hi Tunisiano,
Can you please share any new questions?

thanks krist, i have cleared my exam today with 70q dumps from premdev

2018 spoto latest ccna dumps
http://cciedump.spoto.net/ccna-wireless.php

Passed finally with 921 marks, I used prem dev material with only 53 exact questions which came up on my exam.

@mexim Prem dev reduced questions from 70 to 53. You had to prepare more.

Does anyone have the new questions? Thanks!

How many questions are in the exam?

Hello @Kevin Wat

Does anyone of you uses this dump already?

ufile.io/3ppdu