Share your WIFUND Experience

can anyone confirm the premdev materials are valid?

updated the latest ccda 200-355 dumps with 84Q
http://www.yjro.com/ccie.html

50% OFF for black friday promotion

I would like to share my exam experience, just passed my 200-355 exam on my first attempt thanks much https://www.braindumpscerts.com/vendors/Cisco/CCNA-Wireless/200-355-dumps.php for providing the most updated Questions answers.

Is there a legit dump out there? Not this spam crap that is all over the site. Does anyone know what you get here for the premier membership?

Be well

any valid dump please foor ccna wireless :(

Hey guys,

I have failed the exam last week with 76%. The exam was as Lee said on November 13th.

No WCS, no sim, NO drag & Drop.
1. Familiarized in navigating network settings in Apple devices (laptop & iphone) client connectivity
2. upgrading WLC8.0 both CLI e.g. software install file ##### and GUI e.g. via TFTP etc.
3. Antenna radiation pattern. i remember directional antenna radiation pattern
4. be familiar in FCC, ETSI, Wifi alliance functions
5. WLC 8.0 navigation especially in Wireless and security tabs
6. WLC default management values like SNMPv2 & v3, HTTPS etc
7. familiarity in WPA2 and FAST-EAP
8. Many questions from Roaming and Mobility
9. Many troubleshooting questions with debug commands

Unfortunately I do not have to share any good dumps neither know where Lee got the 411q

Hi all passed today with premdev material… got 2q outside the dumps… but cleared my exam

Hi all. I would like to start with 200-355 exam. Could someone help me with some information? many thanks in advance!! :)

updated the latest wireless ccna 200-355 dump :
http://cciers.spoto.net/cciewire.html

Hi
I cleared my exam yesterday. Thanks to all who shared their experiance
I used 97q material. And i bought from the premdev. He is little bit expensive but help me to clear my exam

Hey guys, since I have been to the exam and failed in the beginning of the December I found this preparation question for free, and most of them where to my exam. Since there are many people here who try to do money, I am sharing you the link for free.

Genearaly if someone wants to help he needs to add on the following

No WCS, no sim, NO drag & Drop.
1. Familiarized in navigating network settings in Apple devices (laptop & iphone) client connectivity
2. upgrading WLC8.0 both CLI e.g. software install file ##### and GUI e.g. via TFTP etc.
3. Antenna radiation pattern. i remember directional antenna radiation pattern
4. be familiar in FCC, ETSI, Wifi alliance functions
5. WLC 8.0 navigation especially in Wireless and security tabs
6. WLC default management values like SNMPv2 & v3, HTTPS etc
7. familiarity in WPA2 and FAST-EAP
8. Many questions from Roaming and Mobility
9. Many troubleshooting questions with debug commands

http://www.ciscobraindump.com/ccna-dumps

spoto updated wireless ccna dumps with 85Q
good luck for all.

http://cciers.spoto.net/cciewire.html

How many different questions are in passleader free dumps and passleader premium ? Generally, does anyone know which dumps are valid and where can be found ? Stop WhatsUP links.

Hi all passed today with 900+ score. I read 91q peovided by premdev. I was failed once using different dumps but this time i cleared my exam, after failing i read lots of stuf and bought dumps from premdev, i got all questions from the premdev material
Thanks to all whi shared thier experiance and thanks to this forum

@mohemed amir

what is premdev?

to pass the exam read the book, do the dump and pay attention to questions in exam.
lots of questions in the exam needs understanding the wireless concepts.
some tricky questions.

1 DnD only
just go through all the previous 15 -20 pages on 640-722 comments.

Nailed it today.

Education Certifications:

https://www.youtube.com/channel/UCXjxd2pYBK_4Kf8-nj3BUhw/videos?sort=dd&shelf_id=0&view=0

Hi dappC, congratulation and thanks for advice.

ARE passleader free dumps + questions from 640-722 comments enough to pass exam ( CCNA Wireless 200-355) ?

I studied for exam but OCG and nuggets are not enough since 860 is for pass and some questions are tricky or not covered in OCG. I just want to be completely prepared for exam. I found here 479Q but I think it could be old , is there better dump ? I saw posts on 640-722 comments but no one from November says anything about new questions ?

Sorry, I meant 437Q not 479Q.

Get latest ccie cisco 400-101 dumps https://www.pass4surekey.com/exam/400-101.html 100% valid money back guarantee

if there are any valid dumps please share:
kaklonker at gmail . com

Please any idea about the ..200-355 exam…There was a drag and drop question about trunk, port channel and access mode vs wlc, AP and switch ? Can someone help pls..? please i mean wireless 200-355 exam…can someone graft it out please ..

Best dump so far is passleader having 500 questions – Pass guaranteed. They have most of the questions with just 5 new questions. A brother just bought the material and passed with 938

Just passed the exam with 9xx.
Here are the tips on how I did.
Thank you all for all your generous posts.

1. DONT BUY ANY QUESTIONS FROM THIS PREMEDEV GUY. HE CHARGES PEOPLE FOR LIKE $159 FOR MATERIAL WHICH IS ALL FAKE**** I believe this designed to help each other succeed and fill the gaps of topics which we have studied about. Not just relying on dumps but meeting others who can give you advice on how to know the course and pass the exam.
2. I used the CBT nuggets. Watched it about 3 times and installed a WLC on vmware and played with it to be familar with the interface.
3. used the 437 practice questions. I bought them off ebay for about $7. About 80% of the questions were from that dump. Just ignor all the D&D, Lab and WCS questions. Those are not in the curriculum blueprint and none of those came.
4. I also read the study guide of CCNA wireless and made sure I had an understanding of all the topics in the blueprint.
5. I am completely new to wireless, it took me about 2 months to prepare for the exam and I work full time. Just focus on all the topics on the blueprint, practice on a WLC to be familar with the different TABs and the ractice questions. You should make it with not issues.
6. All the questions posted at the previous post of this site came. I will repost them so you can have them in my next post.

GOOD LUCK AND LET ME KNOW IF YOU NEED ANY HELP. LETS HELP EACH OTHER NOT JUST PASS BUT LEAR THE MATERIAL IN THE PROCESS… Thank you

———————
Here are some of the questions I had.

One D&D ( Just linking port typyes, trunk, LACP- port channel, AP-access port.. I don’t remember the rest but it is pretty easy.)
no labs
max power fo an Ap for all regulatory domains. ( I did not knw the answer for this one.
requirements for voip. (no jitter or latency..etc. 20% coverage etc. There were 2 questions on this one.)
The only additional question I had was
– When putting in a manual SSID on a Windows PC to connect to a nonbroadcast wifi, is it case sensitive or not. ( Please post to let me know if it is case sensitive or not, cause i was not sure.)
————————–

Passed today with premdev material…i used his 91q material
All questions from the material…. i think some of other vendor do not like premdev and spreading bad about him by posting aome fake comment
Material os good and people are genuine who shared their experiance because i tested premdev

Latest 200-355 dumps helps me to clear my ccna certification exam. Get Valid 200-355 dumps from https://www.pass4surekey.com/exam/200-355.html

wifiguy please can you fix up the D&D i have gotten a problem on this and the worst is that it is not in my pdf…i am just worried about it cos i have fail once and would not like this to happened again ..can someone help me please…200-355 drag and drop trunk, LACP-port channel ,Ap-access pot, wlc, AP Switch…

@wifigu
Congratulations man and best of work.
I am new in Wireless field and i have to study it and do the exam within a week.
So i hope you can help me a little bit.
How to get dumps, really appreciate if you can share it and guide me how to get it.
Also how to get WLC on WMware

Thanks man

congrats wifiguy. I tested putting in a manual SSID on a Windows PC to connect to a nonbroadcast wifi, and it is case sensitive.

I passed ccna wireless exam, i just want to say i used 91q material and some other dumps but all questions came from 91q material

@ Mazid,
Could you please share the 91q with us ?

All

Becareful from Premdev, he is nothing but a scammer ( asking for 160 USD)

He use different names pretending they passed with his SHIT 91Q.

Shame on you, if you what this word mean

I just cleared Implementing Cisco Wireless Network Fundamentals Exam, very happy to share my experience of using https://www.braindumpscerts.com study material. I got the same questions in my exam & I passed it in my first attempt because of the updated exam questions & answers. thanks a lot.

Alexus
You are scammer, I challenge you for that

Hey guys, I failed the exam last Saturday with 84,8% but I can say that at least I can be more of help now.

I think that the D&D question with the Trunk, WLC, Access and LACP ports was a bit tricky at least for my English, but I don’t remember what exactly they asked.

This is the website that I used where you can find the pdfs for free and many of the questions are valid especially from the latest updated during October 2017.
http://www.ciscobraindump.com/ccna-dumps

I am gathering all of the questions that I had last Sat and send them over since I will be giving the exam again on Friday

One question though. How can I find the 437 practice test questions?

@ Yannis.
Sorry to hear that man, and good luck next time.
Frankly speaking i do not have much to say, just wishing you the best of luck man

Hello , I passed 200-355 and saw new questions :
1. There is output from show run from autonomous AP which looks like this:

dot11 ssid guest
vlan10
open authentication
guest-mode

Guest vlan is configured in 2.5 GHz radio. You have to add new SSID, what shoud you do:

A) configure new SSID on 5GHz
B) add new SSID under guest-group (or mode I cannot remember)
C) enable globally mbssid and under doth11 add command mbssid something
D) cannot remember

2. End-to-end security is requirment for your network.Admin should add WLC in Prime 2.0, what protocols you shoud use for remote access and network management ( choose 2):
A) HTTPS
B) SNMPv3
C) SNMPv2
D) SSH

3. User needs connect to wireless network. Requirment is WPA2+PSK, what shoud be configured at user side:
A) username and password
B) PSK
C) EAP
D) radio channel

4.What is mayor characteristic of mobility group:
A)seamless roaming only
B)seamless roaming and WLC redundancy
C)…
D)…

5.New drag&drop
Left side: AP, WLC, LAG, trunk
Right side: connect in access mode on infrastructure switch, connect group of ports to switched network , ports with 802.1Q trunk, bundle of ports for load-balancing

And I had many questions that I saw on 640-722 pages but nobody didn’t confirm which answer is correct. Unfortunetely , I still do not know answer . And, unfortunetely ,nobody on forum didn’t answer to me prior my exam.

Please can some one send/shard me dumps for the wifund exam (200-355).
I’ll take my exam 01/16/2018.
my @ is *** univernet at free dot fr ***
Thanks for all.

Hi Guys, Is there simulation questions in 200-355 Exam. If so, how much question will appear in Exam.

Thank you Reoni, i get it this morning

MSK,there is no simulation in 200-355.

DN, Thanks for your prompt reply and confirmation

I can confirm the questions that DN has provided. DN have you already found and the correct answers as well?

The easy and obvious answer is for Question 3 which is PSK but what about the rest of them.

Also the question that the WiFi guy referred is the following:
What is max power for an AP for all regulatory bodies ? ( Or something close to that )
1)10
2)8
3)1
4)X

I found on a web site that the correct answer is 8. If we reproduce that on a vWLC, we will get max power for 2.4GHz that is 8 and for 5 GHz band is 1 :) Cisco must be kidding us right?

What is max power for an AP for all regulatory bodies ? ( Or something close to that )
1)10
2)8
3)1
4)X
maximum is 1 for sure.

Another new question: If you replace a transmitting antenna of 3db gain with another with 16db gain what will happen with the transmitting power (something like that)
1/2 16 times stronger/weaker
3/4 20 times stronger/weaker.

I am pretty sure its 20 times stronger ?

Hey Kik/ All,

1. Are you sure that the correct answer is 1? How do you justify that?

2. In the last question yes 20 times stronger is the correct answer.

16 – 3 = 13 dBm

So 10 dBm is 10 times more + 3 dBm is 2×10 = 20 times stronger.

3. I got another new question that it came to my mind. It was regarding 802.3af and 802.3at PoE protocols and what happens if 802.3af is providing power to a Cisco 3700 or 3600 AP

Hi Yannis,
I am sure that it is 1. You have 8 power levels on a AP. 8 is the weakest and 1 is the strongest in any regulatory domain, in any. How much db is the strongest depends on the country you select when configuring the AP or WLC.
3) the AP point works in 3×3 MIMO, checked in Cisco documents.

latest ccie dumps
http://cciedump.spoto.net/rs-ccie.php
good luck all guys

hi all passed with 91 question bank
guys who are spreading bad thing about premdev is wrong, i got all the questions from premdev’s question bank

@ gomz
You are nothing but a scammer. Boy !!!