Share your WIFUND Experience

Which Cisco WLC WLAN functionality do you replicate by creating an open WLAN using an ACL?

A. Layer 3 security mechanism with the VPN passthrough option.
B. Layer 2 security mechanism with the web authentication option.
C. Layer 2 security mechanism with the 802.1X option.
D. Layer 3 security mechanism with the CKIP option.

@ JEVC Thank you, you are super helpful!
Can you tel me your opinion on these questions?

Q301 – A company has all IEEE 802.11a/802.11g devices; however, its network administrator recommends installing 802.11n access points to provide greater performance. Which feature on an 802.11n AP provides better performance to legacy devices?
A. channel aggregation
B. transmit beam-forming
C. maximal-ratio combining
D. spatial multiplexing

Q302 – A client is upgrading its wireless infrastructure to IEEE 802.11n-capable access points. Which technology leverages the 802.11n radios to provide better coverage and throughput for legacy IEEE 802.11a/g clients?
A. spatial streams
B. MRC
C. MIMO
D. beam-forming

Q303 – What regulatory body approves a Wi-Fi device before it can be sold in the US?
A. FCC
B. WiFi-Alliance
C. ITU-R
D. IEEE

@Anonymous
i think the correct answer is:

A. Layer 3 security mechanism with the VPN passthrough option.

Reference:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_overview.html

Features Not Supported
Static AP-manager interface
note.gif
Noteblank.gif For Cisco 5500 Series Controllers, you are not required to configure an AP-manager interface. The management interface acts like an AP-manager interface by default, and the access points can join on this interface.

Asymmetric mobility tunneling
Spanning Tree Protocol (STP)
Port mirroring
Layer 2 access control list (ACL) support
VPN termination (such as IPsec and L2TP)
VPN passthrough option

You can replicate this functionality on a Cisco 5500 Series Controller by creating an open WLAN using an ACL.

@Sima @goro GL

New D&D:
Console port
Redundancy port
Service port
Distribution port

access mode
trunk mode
peer device
out of band management

Q 802.11b – which speeds to disable 802.11b in Mbps (select 2) – 1,11,14,48,56

Q 802.11-2007 about measured in – amplitude, frequency

Q certificate stored on client and server – EAP-TTLS, EAP-TLS, PEAP, EAP-FAST

Q Pick 3 non overlapping channels – 1,3,4,6,10,12

@ capwap
Thanks for the update, any idea what is the D&D answer or order?

Anyone have any idea?

Can someone check if this is the correct answer for the new D&D here:
Service port =====> Access mode
Distribution port =====> Trunk mode
Console Port =====> Out-of-Band Management
Redundancy port =====> Peer device

@capwap

Thanks. What about the rest? Is Shirokuma’s dump still valid?

What is the correct answer?
An engineer has been asked to disable two of 802.11b rates in the wireless environment. What three rates should be disabled to fulfill this requirement? (Choose two.)
1,11,14,48,56

A. 14 Mbps
B. 11 Mbps
C. 1 Mbps
D.56 Mbps
E. 48 Mbps

What is the correct answer here pls?
An engineer is connecting a Cisco 5508 Wireless Controller that must connect to an out-of-band management network for management only. Which two options should be used for the port on the WLC and the cable type? (Choose two.)

A. service port
B. redundancy port
C. console port
D. distribution system port
E. straight through cable
F. crossover cable
G. console cable

Guys, Thanks for all the helpful info, where are the numbers on the questions coming from ?
Thanks !

Passed Yesterday
Thanks for everyone here and to JEVC
65Qs
3 DND ITU-r, clean air and the new DND mentioned in page 34.
Dump in page 27 still valid.
About 12-14 new questions never seen before but were easy.
But most of the questions mentioned in here from page 29 to page 34 got them in the exam.

@S@LIM
Congrats and thanks for feedback

did you study examtopics.com questions/dump or only the one on pg 27?

@goro
Yes I studied the questions of Examtopics too

Passed On MONDAYFEB17
65 Questions
Here are 54 questions
1. When analyzing a network capture an engineer sees four different addresses in the MAC header. Which type of frame must it be?
• A. DS to Client
• B. Client to DS
• C. Control
• D. Mesh
2. What is the optimum 2.4 GHz wireless cell-overlap percentage for VoWLAN deployments?
• A. 10
• B. 20
• C. 15
• D. 5
3. Which mode is valid for a lightweight access point?
• A. broadcasting
• B. blocked
• C. foreign
• D. SE-connect

4. A customer would like to configure 25% of the access points on a floor to exclusively conduct spectrum analysis functions. What mode will the access points have to be configured in order to achieve this request?
• A. Local Mode
• B. Monitor mode
• C. SE-Connect mode
• D. SC-Connect mode
5. Several types of controller ports can be connected to the network. Which controller on connects to a switch port in access mode and used for out of-band management, system recovery,and initial boot functions?

A. Console port
B. Redundancy port
C. Distribution system port
D. Service port

6. Which statement about beamforming on a wireless network is true?
• A. It increases the RF coverage of the access points
• B. It moves the wireless signal automatically to different channels when there is high utilization
• C. It improves the SNR by focusing the signal transmission to the client
• D. It balances the traffic load by distributing clients across different access points
7. Which two items are needed to configure a basic WLAN? (Choose two.)

A. Security method
B. Cisco Prime template
C. Interface group
D. SSID name
E. RADIUS server

8. You use 802.1x when configuring Layer 2 security in WLAN. Which type of data encryption do you use?
A. Cisco key Integrity Protocol *********
B. WEP
C. Cisco Centralized Key Management
D. WPA2
9.Which element is the main disadvantage of implementing a WLAN using WEP security?
A. encryption *********
B. roaming delays
C. performance
D. dynamic keys
10. In the 802.11-2007 standard, which metric for 802.11 radios does the RSSI measure?
A. Speed
B. Wavelength
C. Amplitude
D. Frequency
11.Which two switch platform provide wireless and wired access to end users? (Choose two.)

A. Cisco Catalyst 3750-X Series
B. Cisco Catalyst 365 Series
C. Cisco Catalyst 3850 Series
D. Cisco Catalyst 2960-X Series
E. Cisco Catalyst 3560 Series

12.Refer to the exhibit. When the Admin Status of an access port is enabled what does this mean in radios?
A. 802.11a/n/ac and 802 11b/g/n radios must be UP
B. 802.11a/n/ac is DOWN but the 802.11b/g/n radios is UP by default
C. 802.11a/n/ac and 802.11b/g/n radios can be UP or DOWN
D. 802.11a/n/ac is UP but the 802 11b/g/n radios is DOWN by default
Correct Answer: C

@S@LIM
What was your answer to new DnD?

@goro
I responded to the new DnD as:
Service port =====> Access mode
Distribution port =====> Trunk mode
Console Port =====> Out-of-Band Management
Redundancy port =====> Peer device

Also these 12 questions from Niken! Were in my test!

@Niken!Test

What about the rest? You were going to post 65 but ended on 12….

@S@LIM
So as I’m going through questions from page 29 to 35 all I see are discussions about questions from pg 27 dump (maybe they’re in other dumps as well). I’m not seeing even one question from examtopics.com…..just trying to prepare for the exam and not waste time on any unnecessary questions….Can you remember any examtopics.com question that you had on your exam that’s not in Shirokuma’s dump?

@goro
Not sure if this is too late for you
I passed today, the only thing I was weak on was RF.
Browsed the questions last night on page 27 – they are pretty relevant but a lot of answers are incorrect on there.
I’m already strong with encryption etc as I have R&S & security already.

@passed today

Most of the answers are correct from that dump in the first pdf file, second file has more mistakes. Do you remember which DnDs you had?

@goro

my exam is tomorrow , can you please share your experience .. for example what DnD did you get ? Thank you

@Sally
mine is tomorrow as well….lol

@ calvin mathor —–> can you please share your experience .. for example what DnD did you get ? Thank you

need clarification. So Feb 24 is the last day to take the old exam and Feb 25th will be new exams right to take effect right?

Pablo yes

@Pablo
no last day is today 22nd

passed on the last day! Same three DnDs, maybe 8-10 questions that are not in any dump but I got many arguable questions where different dumps have different answers….I just went by my knowledge and understanding ignoring dump answers….seems like I was right.
Thanks to all who shared feedback.

Passed.quetsions here were relevent . Pg27 has some wrong questions. From 64q at the exam there were 20 new ….but not too hard if you study….thank you all.

Going to take the exam today at 4:30 EST lets see what happens

@goro

hey man, nice to see u passing too, congratulations ;)

hi guys. i need a real dumps from 200-355, ccna wireless. pls help me.

11.Which two switch platform provide wireless and wired access to end users? (Choose two.)

A. Cisco Catalyst 3750-X Series
B. Cisco Catalyst 365 Series
C. Cisco Catalyst 3850 Series
D. Cisco Catalyst 2960-X Series
E. Cisco Catalyst 3560 Series

12.Refer to the exhibit. When the Admin Status of an access port is enabled what does this mean in radios?
A. 802.11a/n/ac and 802 11b/g/n radios must be UP
B. 802.11a/n/ac is DOWN but the 802.11b/g/n radios is UP by default
C. 802.11a/n/ac and 802.11b/g/n radios can be UP or DOWN
D. 802.11a/n/ac is UP but the 8e02 11b/g/n radios is DOWN by default
Correct Answer: C

Pass
the premium is valid no new question

get premium follow the below

????????????????.????????

Hi
I need cisco new dumps
I want to take the exam soon
Thanks
Plz share

Premium definitely valid, about 3 to 4 new questions (got 96%)

Just know all the material on this file well and you will be fine

ｃｐｋｑ．ｔｋ

6. Which statement about beamforming on a wireless network is true?
• A. It increases the RF coverage of the access points
• B. It moves the wireless signal automatically to different channels when there is high utilization
• C. It improves the SNR by focusing the signal transmission to the client
• D. It balances the traffic load by distributing clients across different access points
7. Which two items are needed to configure a basic WLAN? (Choose two.)

A. Security method
B. Cisco Prime template
C. Interface group
D. SSID name
E. RADIUS server

8. You use 802.1x when configuring Layer 2 security in WLAN. Which type of data encryption do you use?
A. Cisco key Integrity Protocol *********
B. WEP
C. Cisco Centralized Key Management
D. WPA2
9.Which element is the main disadvantage of implementing a WLAN using WEP security?
A. encryption *********
B. roaming delays
C. performance
D. dynamic keys
10. In the 802.11-2007 standard, which metric for 802.11 radios does the RSSI measure?
A. Speed
B. Wavelength
C. Amplitude
D. Frequency

I got (97%) drag and dros ae same except 4 qs

????????????????.????????

Your money is fully secured by DumpsSpot.com (200-355)

Money Back Guarantee, if you fail your test.

Hurry up as the offer ends this week! Get started today to get certified this week!

Lju

Hello I studied 2-3 hours a day and I pass the exam today. All the qs on the exam are from dump.

crash * to downld
alnbr.*tk

8. You use 802.1x when configuring Layer 2 security in WLAN. Which type of data encryption do you use?
A. Cisco key Integrity Protocol *********
B. WEP
C. Cisco Centralized Key Management
D. WPA2
9.Which element is the main disadvantage of implementing a WLAN using WEP security?
A. encryption *********
B. roaming delays
C. perforgtrmance
D. dynamic keys
10. In the 802.11-2007 standard, which metric for 802.11 radios does the RSSI measure?
A. Speed
B. Wavelength
C. Amplitude
D. Frequency

tj

Pass 96%

no lab, no new q
learn all questions in all sections

Thanks for this file Rem0v ZZZ
dvsb.ZZZtk

thanks prep4CIsco i successfully passed my exam on first attempt

I PASSED MY Exam through pRep4cisco valid answer

Simply wow to the exam questions. I gathered all the correct information and finally chose this website. PREP4cisco I scored 90%.

@Done my exam.

Today I passed my exam with 98% everything you need to pass is in dumps Be prepared for at least 5 new questions

Follow the below only

????????????.????????.????????

pr3p4cisco is scammer selling old dump.

WARNING WARNING WARNING FAKE FAKE FAKE

WARNING WARNING WARNING FAKE FAKE FAKE

WARNING WARNING WARNING FAKE FAKE FAKE

FAKE FAKE FAKE I FAILED USING pr3p4cisco

I Passed the Exam Just thanks p a s s E x a m h u b

This website has all the mock tests available for the exam which allowed me to evaluate my performance and improve my score to 91% thanks p a s s e x a m h u b

@Passed the exam Thanks guys all qs are same only few new

Change (slash) into Original SLASH
t.lyslashCRjkp