Share your WIFUND Experience

Regarding @ketty and the website. While it is nice and some information is valid. I have to agree with @Clauds. I noticed many of the questions had incorrect answers. I was comparing this to about 2-3 other sources.

I’m taking the test on 1/20 (Monday). I’ll be sure to update all. Once complete, if needed I’ll share my study resources. However most of my resources were found on page 27 of this chat.

@Clauds and swy

The ITU d&d was one I havent seen anywhere else either, yet it was on my exams…On pg 41 of the exam guide.

They set up the regions and you drag the continent under each region:

Region1
Europe, Africa , Northern Asia

Region 2
North America , South America

Region 3
Southern Asia and Australia

Does anyone have any insight into the last question from the image on 27.

A campus wireless LAN deployment using the converged access model must extend to 500 access points. Seamless routing is required throughout the network. Which three statements about this scenario are true?

a. One or more discrete controllers must be used to support the desired access point count.
b. If a Cisco 5508 wireless controller is used, it acts as the mobility controller.
c. If a Cisco 2504 wireless controller is used, it acts as the mobility agent.
d. If a Cisco 5760 wireless controller is used, it acts as the mobility controller.
e. A single stack of Catalyst 3850 series switches can be used to support the desired access point count.
f. If a Cisco 5760 wireless controller is used, it acts as the mobility controller and mobility agent.

My exam is tomorrow so hopefully someone can assist, looking for equipment info to weed out the wrongs atm. Thanks

@soon
Which longer questions with the network maps did you get? (Where you have to look at device configs to get the answer)

@swy

The only questions i had were pics of a screenshot of a menu (No clicking on it or looking at configs) and there was a question to follow. So, I did not have to navigate through any menus or enter any commands.

@swy -only 2 of those, i think.

Good luck on your exam!

At the end of February, Cisco exams will change, the exam difficulty will become unpredictable, and it will be difficult to obtain a stable test dump in a short period of time. The dump is stable at the moment and will ensure you pass the exam quickly. Now is the last chance to pass the exam easily.As we all know, the sooner you get certified, the more valuable
This is a URL that can help you↓↓↓
forums.delphiforums.com/happy2020/messages/1/1

Hi folks,

Please help me with any dump, my test is on January 20th?
Thanks!

@goro
@Clauds
Regarding ketty’s dump, where do I find them?

Anyon tried this website? Examtopic

examtopics.com/exams/cisco/200-355

@swy – good luck … I looked at this question last week but I decided to leave it on for later .
not sure if this will help but I will try to research it :
A campus wireless LAN deployment using the converged access model must extend to 500 access points. Seamless routing is required throughout the network. Which three statements about this scenario are true?

a. One or more discrete controllers must be used to support the desired access point count.- this must be FALSE – ?discrete controllers …if 5760 is used it will support the 500 AP
b. If a Cisco 5508 wireless controller is used, it acts as the mobility controller. – TRUE
c. If a Cisco 2504 wireless controller is used, it acts as the mobility agent. maybe False – support only 75 AP
d. If a Cisco 5760 wireless controller is used, it acts as the mobility controller.-TRUE
e. A single stack of Catalyst 3850 series switches can be used to support the desired access point count. -FALSE
f. If a Cisco 5760 wireless controller is used, it acts as the mobility controller and mobility agent. -FALSE
https: //www.cisco.com /c/en/us/products/collateral/wireless/2500-series-wireless-controllers/data_sheet_c78-645111.html
https:/ /www.cisco.com /c/en/us/td/docs/wireless/controller/3-2_0_se/release_notes/OL28115_3_2_se_rn.html
https:/ /community.cisco.com /t5/wireless-mobility-blogs/converged-access-mobility-new-mobility-architecture-on-wlc-5500/ba-p/3098801

@swy : c. If a Cisco 2504 wireless controller is used, it acts as the mobility agent. –> maybe TRUE but support only 75 AP
@Lima – examtopics is good , also vceplus is good but free …. the problem you will find is that there are too many questions(600) to look over. see the dump on page 27 here
everybody is reporting no SIMs/LABs and no WCS questions

Thanks Bbb

@swy and bakist – good luck to exam !
And please come back with feedback after exam ;)

Is this correct?
Which AireOS WLC CLI show commands details both an access point’s name and serial number?
A. show boot
B. show sysinfo
C. show inventory
D. show license all

Correct answer: D

I think the answer to that question is b, d, f

2504 dosen’t support enough, neither does the single stack of switches. All of the info I found show the 5508 and 5760 doing MCC or MC/MA in the diagrams. I cannot find any relevant info on option a for discrete controllers.

I will head in to write it now, I will come back with an update this afternoon.

@Swy – Good luck swy

@limaIt should be : show ap inventory
Where did you get this question ?

https: / / http://www.cisco.com/c/en/us/td/docs/ios/fundamentals/command/reference/cf_book/cf_s2.html

@Lima, I believe Bbb is correct. The answer is: Sh Inventory – C

Thanks Bbb and Bakist

Is it A or D?
Question: Which command shows the IP address of a client associated with an AP?
A. show client detail
B. show client ap 802.11 {a || b} all
C. show client ap 802.11 {a || b}
D. show client summary

Correct answer: A

uestion: Which of the following technologies are unsupported in a converged infrastructure?
A. Mesh
B. FlexConnect
C. OEAP
D. AP direct connect
E. AP modules

Correct answer: A B C E?

@ swy

I hope you passed the exam, would you please provide your feedback and thanks!

@lima – where did you get those questions
q1.Correct answer is A see screen shot
https: // http://www.petri.com /wireless-network-tools/17-show-client-summary
q2 – have no idea
where did you get those questions

Hello. I have been studying CCNA Wireless 200-355 Official Cert Guide (David Hucaby) during last month and unfortunately I failed the exam this morning (791/1000).
My first impression was that some questions weren’t fully covered (or even not at all) by the cisco book.

As I plan to re-take the same exam shortly, could someone advise me additional materials (books, docs, pdf …etc) I should get to complete my learning (Cisco Press book is not enough.

Kind Regards

Hello. I have been studying CCNA Wireless 200-355 Official Cert Guide (David Hucaby) during last month and unfortunately I failed the exam this morning (791/1000).
My first impression was that some questions weren’t fully covered (or even not at all) by the cisco book.

As I plan to re-take the same exam shortly, could someone advise me additional materials (books, docs, pdf …etc) I should get to complete my learning (Cisco Press book is not enough

@Lima
@Bbb is correct.
Q1. A
Q2. Haven’t seen that one. I’m too far in to research that one. Taking test on Monday.
@Ed & Edgar – go to page 27 of this forum and you will find links for additional study material.

@Bakist: thanks for your feedback, just checking page 27, which post please ? links I have tried aren’t reachable anymore, thx

Guys – no names , and no test dates – for ur own good
@ eee – try again , but harder they are there

DND from the dump at pg 27 / also commented on pg 30 but answers given there were incorrect……always double check ….and remember we are doing this because CISCO does not give us enough information in their textbooks and not just to pass the exam
Q7: Drag and Drop the Cisco CleanAir term from the left onto its correct definition on the right. Not all options are used.
IDR = record containing all information a WLC has about a specific interference device
AQI = overall spectrum cleanliness measure that takes into account the severity of all interface sources

https: //www.cisco. com/ c/en/us/support/docs/wireless/5500-series-wireless-controllers/112139-cleanair-uwn-guide-00.html

SI = number between 1 and 100 that measures the impact of a given (single) interface device on a quality of the spectrum
Spectrum Intelligence – data about the RF spectrum that is derived from advanced interference algorithms

Hi, anyone can advise which dump is the more accurate for passing wireless exam…I went through the page 27 and was confused since it is mentionning a lot of source…Kindly advise…..(or spell it using *** if possible)..cheers

Thes questions are from:learncisco.*n*e*t/test-ccna.php?exam=200-355

They give answers of some question at the end, in a DEMO version.

@Bbb
Can you please advise as what is the correct answer for DND question of CleanAir?

Hi
Does anyone know if there is simlet/labs question in 200-355 test?
I header there is that and MCQ and DND? Is that true?

Which governing body analyzes the applications and environments in which wireless networks are used?
A. EIRP
B. ETSI
C. FCC
D. IEEE
E. WiFi Alliance
NOTE SURE is it C or D – most dumps say D but …maybe C

C’mon @swy and bakist … nothing ?
No feedback ? How was the exam ? pls

@Bbb
I would go with D

FCC controls frequency and where to apply and maybe for some regions not whole areas of the world while IEEE dose more work relate to IEEE 802.11a/b/g/ac/n/x and their applications, so the one who govern this standard and whatever related to it is IEEE.

fcc.gov/about-fcc/what-we-do
Promoting competition, innovation and investment in broadband services and facilities
Supporting the nation’s economy by ensuring an appropriate competitive framework for the unfolding of the communications revolution
Encouraging the highest and best use of spectrum domestically and internationally
Revising media regulations so that new technologies flourish alongside diversity and localism
Providing leadership in strengthening the defense of the nation’s communications infrastructure

Hi
Please help

Does anyone know if there is simlet/labs question in 200-355 test?

I header there is that and MCQ and DND? Is that true?

@Bbb
Refer to the exhibit
Data rates:
6Mbps ===Disabled
9Mbps ===Supported
12Mbps ===Mandatory
18Mbps ===Supported
24Mbps ===Mandatory
36Mbps ===Supported
48Mbps ===Mandatory
54Mbps ===Supported

Given the WLC data rate configuration, a control frame is sent at which speed?
A. 9 Mbps
B. 12 Mbps
C. 48 Mbps
D. 54 Mbps

C or D?

@Lima – google says 54Mbps
hard to tell without the exhibit

Refer to the exhibit
Data rates:
6Mbps ===Disabled
9Mbps ===Supported
12Mbps ===Mandatory
18Mbps ===Supported
24Mbps ===Mandatory
36Mbps ===Supported
48Mbps ===Mandatory
54Mbps ===Supported

Given the WLC data rate configuration, a control frame is sent at which speed?
A. 9 Mbps
B. 12 Mbps
C. 48 Mbps
D. 54 Mbps

C or D?

Is it based on WLC rate configurations or a control frame rate?

Q212.
How many types of control frames are only used in PCF mode?
A. 0
B. 1
C. 2
D. 3
E. 4
F. 5

D or F?

No SIMS, NO WLC questions.

2 D&D
Cisco CleanAir & ITU Regions

Questions I recall:
A campus wireless LAN deployment using the converged access model must extend to 500 access points. Seamless routing is required throughout the network. Which three statements about this scenario are true?

a. One or more discrete controllers must be used to support the desired access point count.
b. If a Cisco 5508 wireless controller is used, it acts as the mobility controller.
c. If a Cisco 2504 wireless controller is used, it acts as the mobility agent.
d. If a Cisco 5760 wireless controller is used, it acts as the mobility controller.
e. A single stack of Catalyst 3850 series switches can be used to support the desired access point count.
f. If a Cisco 5760 wireless controller is used, it acts as the mobility controller and mobility agent.

Refer to the exhibit
Data rates:
6Mbps ===Disabled
9Mbps ===Supported
12Mbps ===Mandatory
18Mbps ===Supported
24Mbps ===Mandatory
36Mbps ===Supported
48Mbps ===Mandatory
54Mbps ===Supported

Given the WLC data rate configuration, a control frame is sent at which speed?
A. 9 Mbps
B. 12 Mbps
C. 48 Mbps
D. 54 Mbps

Also, most of the material on Page 27 will help. Regardless, there are questions I didn’t see on any study material.
I had over 600+ flash cards/questions and there were still a few I didn’t recognize. You have to study and know the foundational concepts. Study the material and you will do okay.

Passed.

Which two are considered as characteristics of the original 802.11 protocol? (Choose two.)

A. The most common deployment is three non-overlapping channels that are 20 MHz wide.
B. Defined FHSS and OFDM as possible methods for modulation.
C. The most common deployment is 6 non-overlapping channels that are 20 MHz wide.
D. Designed to operate in the 5 GHz ISM frequency spectrum.
E. Defined DSSS and FHSS as possible methods for modulation.

A&B or A&E?

End-to-end encryption is a management requirement for a wireless deployment. When importing the WLCs into Cisco Prime infrastructure 2.0, which two options represent the version of SNMP and remote access parameter that fulfill this requirement? (Choose two.)

A. HTTPS
B. SNMPv3
C. SNMPv2c
D. SNMPv1
E. SSH

A&B or B&E?

@ Lima – Q212 it will really depent on the wording of the actual question:
QUESTION 69
How many types of control frames are only used in PCF mode?
A. 1
B. 4
C. 3
D. 2
Correct Answer: C

BUT:
The control frames that are used in PCF mode are as follows:

Contention Free End (CF+End)
Contention Free End Ack (CF +end_ack_)
CF-Ack
CF Ack+CF Poll
CF-Poll

http:/ /www .ciscopress .com/ articles /article.asp ?p=1271797&seqNum=2

Congratulation Baaakkkiiisssttt
How did you answer to those questions that you mention ?

@Baaakkkiiisssttt at Cisco CleanAir D&D what was your answer pls ?
Thanks

Check this for ITU Regions (Cisco CleanAir & ITU Regions)

https://www.google.com/search?q=itu+regions+map&rlz=1C1GCEU_enGB868GB868&tbm=isch&source=iu&ictx=1&fir=vmt-OUGAibIJYM%253A%252CauKsr87nw0TK7M%252C%252Fm%252F02x_8g&vet=1&usg=AI4_-kS6X_cQT7NP0c5jWNTkPXGGlpGBZQ&sa=X&ved=2ahUKEwjx6tHs4pfnAhVQWRUIHfvdAVsQ_B0wCnoECAsQAw&safe=active&ssui=on#imgrc=8DMQToZhHjh5JM:&vet=1

Passed today

3 Questions D&D from vceguidecom
1 Question about enabling airclean on the wlc
about 7-10 wlc questions
Other questions from examtopicscom
And some question from page 27 the 2nd uploaded pdf file
Also about 7 questions never seen before