Share your WIDESIGN Experience

Does anyone take the exam this month?

I used it for two exams and it helps me to understand their questions, from

crack4sure.com

anyone passed the exam?

took the exam yesterday, barely passed the exam, there are now new question and a lab simulation. Salah materials provide a big help, specially the corrected questions.

Big Thanks to Salah for sharing his materials, specially the corrected questions.

I would recommend that you look and review the new questions which is not yet seen on any other reviewers.

God Bless to Everyone.

black hawk down please share your materials on my email please. I need to pass the exam.
jacobgranger59 @ g m a i l . c o m

@black hawk
can you share to us the new questions?

@Salah, i send you an email so you can send me that questions. Thanks a lot !!!

@Fedemod, Done

@Salah i also send an email to you. Thanks!

@Salah, Dito, I would like them as well, and thank you! {email not allowed}

Free sharing of CCNA 200-125, CCNP 300-101 300-115 300-135, CCIE 400-101 400-251 and cissp test materials, the material is currently stable and effective, very suitable for the most recent exam. Please see my name, it can help you.

Congratulations!!!

Just passed 300-360 exam on 24/July/2019 with a good score.

PassLeader 300-360 dumps (208q version) are still valid for passing – only few new questions, not difficult at all, do not worry!

Special thanks guys for sharing!

Thanks a lot!

+1

+1

+1

+1

+1

I have taken exam 300-360 last week and passed with 900. Passleader 300-360 dumps (208q version) are still valid with the corrected questions. Thank you very much Salah for your corrections, it helped me to pass.

New Simlet are not familiar in dumps

208 dumps is not valid. new more questions are in exam

Only 20% are valid questions in dumps

Everyone who passed the exam. What is the correct answer for the simlet RAP and MAP

Correct answer please

Number of branch locations
Plans for branch expansion
Number of customers
Business type
Site type

Correct answer please
Confusing dumps
Same questions different answer. The other one have answer 80 but in this 67

What is the minimum RSSI signal for a data WLAN?
-65 dBm
-67 dBm
-72 dBm
-80 dBm

Answer c but I think tge correct answer is b. Please correct if im wrong

A user is running a new video conferencing application on their laptop and is being disconnected
as they move from one access point to another. Which situation will cause these disconnects

P2P blocking is denying connections
FT is not supported by all clients
AAA override needs to be enabled
WMM must be changed to disabled
Answer: C

I think the correct answer is B. Correct me on this

You are designing a network deployment for a state college. The college has six buildings. Each building has a WLC located in the IDF to support access points. Which type of wireless
architecture does the deployment represent
A. centralized
B. distributed
C. cloud
D. autonomous
Answer: A

I remember the exams. what is the RCT in wireless?

Pass Leader (208) is not valid. I think only 10-20% of the question will appear from the Pass Leader Dumps. Plus the some answers on pass leader dumps are wrong. The only valid resources are from @Salah. Get in touch with him for the valid dumps. But there are already new questions and simlets, So you probably need to find the new questions.

AGAIN DO NOT TRUST PASS LEADER!!! and WASTE YOUR MONEY.

Passed exam !
Lot of questions from @Salah info !! Thanks Salah !!
Some new questions, ones easy and others more or less.

New questions i remember:

Which doc you must check in order to know if Cisco WLC 8510 is NEC compliant (dont use the compliant word, is some like this)

A: Hardware Guide
B: Installation Guide
C: Dont remember
D: Deployment Guide

Think is A

Which value is possible in Ekahau capacity planner for Peak Hour (some like this)

A: 2x
B: 6x
C: 8x
D: 12x

Dont know the answer.

-Simlet of Wireless Outdoor APs (Mesh), not so difficult. Know what EASE term is.
-Capture of Cisco Prime Planning tool (i almost sure is the planning tool) with multiple choise questions.

Good Luck !

“Capture of Cisco Prime Planning tool” i mean screenshot of CPI Planning Tool.

Congratulations!!!

Just passed 300-360 exam on 2/Aug/2019 with a good score.

PassLeader 300-360 dumps (208q version) are still valid for passing – only few new questions, not difficult at all, do not worry!

Special thanks guys for sharing!

Thanks a lot!

+1

+1

+1

+1

+1

+1

8xx, not hard at all only studied the free dumps from itlibraries. GL!

Thanks to salah.
Dont waste your money in scam dumps.
Passed the exam.

@Jacob
Please share b r i g h t o n m w a b a b at gmail .com

@Salah and Jacob
Please share mrpink04 @ web .de

Thank you

@Jacob

Please share b e n e m g @ hot mail.com

Thank jou

@Salah and Jacob
Please share worldblue @ g mail. com

Thank you

CCNA answer
CCNP answer
CCIE answer
Please pay attention to my name if necessary
=1
=1
=1
=1
=1
=1

passed guys, follow Salah, Jacob and Fedemod’ s instructions, there are new questions to which you have to use your own understanding,

In the simulation, understand ease calculation and how to mount a mesh AP on a light pole

See Fedemond all below was there:

New questions i remember:

Which doc you must check in order to know if Cisco WLC 8510 is NEC compliant (dont use the compliant word, is some like this)

A: Hardware Guide
B: Installation Guide
C: Dont remember
D: Deployment Guide

Think is A

Which value is possible in Ekahau capacity planner for Peak Hour (some like this)

A: 2x
B: 6x
C: 8x correct answer
D: 12x

-Simlet of Wireless Outdoor APs (Mesh), not so difficult. Know what EASE term is.
-Capture of Cisco Prime Planning tool (i almost sure is the planning tool) with multiple choise questions.

I have done my test with 985/1000 congrats me.

Thank You again god bless you

Without 2 star**
http:/*/tiny.l*t/rtmrxx4

Jake July 31st, 2019
I think the correct answer is B. Correct me on this

You are designing a network deployment for a state college. The college has six buildings. Each buildingqd has a WLC located in the IDF to support access points. Which type of wireless
architecture does the deployment represent
A. centralized
B. distributed
C. cloud
D. autonomous
Answer: A

Hi guys,

can anyone please share Salah’s material?

mvan77029 at gmail . com

I can provide any exam questions and answers you need. Please add my email if necessary. I will do my best to help you.
Js8113246@ gmail.com (no spaces)

Hi, does the widesign exam have sim or lab?

@Anonymous

You are designing a network deployment for a state college. The college has six buildings. Each buildingqd has a WLC located in the IDF to support access points. Which type of wireless
architecture does the deployment represent
A. centralized
B. distributed
C. cloud
D. autonomous

Correct answer is B

CCNA questions and answers. Please contact me if you need it, I will reply you in the first time.

CCNA questions and answers. Please contact me if you need it, I will reply you in the first time.
js8113246@gm (no spaces) ail.com

Question 17

Access points at branch sites for a company are in FlexConnect mode and perform local switching, but they Sauthenticate to the central RADIUS at headquarters.
VPN connections to the headquarters have gone down, but each branch site has a local authentication server. Which three features on the wireless controller can be configured to maintain network operations if this situation reoccurs? (Choose three.)

A. Put APs in FlexConnect Group for Remote Branches.
B. Set Branch RADIUS as Primary.
C. Put APs in AP Group Per Branch.
D. Put APs in FlexConnect Group Per Branch.
E. Set Branch RADIUS as Secondary.
F. Set HQ RADIUS as Primary.

Material says AEF. I believe it’s CEF. There is no implication of connections between branches, and so each branch would not bes able to use another branch’s auth server. Putting each branch in a separate group allows you to define the local radius server for each branch to use.qs
NEW QUESTION 226
During RF verification, some 5 GHz clients are unable to connect to certain APs, while other 5 GHz clients can connect to all APs. What may prevent some clients from connecting?

A. some clients may not support the UNII-2 Extended band
B. somsae clients may not support OFDM modulation
C. some clients may not support TPCv2
D. some clients may not support CCXv5

Answer: A

NEW QUESTION 228
How many location points are needed to validate both 802.11b/g and 802.11a in the Cisco WCS Calibration?

A. 50
B. 100
C. 150
D. 200
E. 300

Answer: E

I have done my test with 985/1000 congrats me!

Thank You again god bless you

Without 2 star**
https:/*/tiny.p*l/t588c

You are designing a network deployment for a state college. The college has six buildings. Each buildingqd has a WLC located in the IDF to support access points. Which type of wireless
architecture does the deployment represent
A. centhdyralized
B. distributed
C. cloud
D. autonomous

Correct answer is B

Cisco is changing our lives! Real and reliable CCNP questions and answers, after the purchase, any updates will be provided free of charge, to ensure that you are using the latest questions to take the exam, we will be able to guarantee that you pass the exam 100%. Please give yourself a chance to change your life.
http://medium.com/@chens8382/cisco-exam-preparation-c6f5d4cc52a7?utm_source=15935785205246

You are designing a wireless network to support voice and video applications. The customer is requesting to use the 2 4 Ghz band only because they primarily use 802 11b legacy devices.

Which two settings must be considered? (Choose two)

A. Set the mandatory data rate to 12 Mbps
B. Disable the data rates below 11 Mbps and set the rest as supported
C. set the mandatory data rate to 5.5 Mbps
D. Disable the data rates below 12 Mbps and set the rest as supported
E. set the mandatory data rate to 11 Mbps

What’s the correct answer?

I think the answer is AD, am i correct?

PASS today… a lot of new question. dump is valide for 70%

I had no Q form the new PL 210-229 only Q.223

– Check Coverage Hole Dedction Default Settings

and the Qs form FEDEMOD:

Which doc you must check in order to know if Cisco WLC 8510 is NEC compliant (dont use the compliant word, is some like this)

A: Hardware Guide
B: Installation Guide
C: Dont remember
D: Deployment Guide

Think is A

Which value is possible in Ekahau capacity planner for Peak Hour (some like this)

A: 2x
B: 6x
C: 8x correct answer
D: 12x

-Simlet of Wireless Outdoor APs (Mesh: RAP, MAP), Know what EASE term is and how to calculate EASE for RAP-MAP Phat.

-Capture of Cisco Prime Planning tool and what the print screen should show: multiple choise questions. Set APs, Planing Tool, need Licences (?) …

PASS today… a lot of new question. dump is valide for 70%

I had no Q form the new PL 210-229 only Q.223

– Check Coverage Hole Dedction Default Settings

and the Qs form “mancert” August 24th, 2019

Simlet of Wireless Outdoor APs (Mesh: RAP, MAP), Know what EASE term is and how to calculate EASE for RAP-MAP Phat.

Capture of Cisco Prime Planning tool and what the print screen should show: multiple choise questions. Set APs, Planing Tool, need Licences (?) …