Share your IUWMS Experience

Two questions about first step in bottom-up troubleshoot

Hello, anyone passed the exam last weeks?

Im taking exam next month and I can’t find any study material. Any recommended study guides would be greatly appreciated!

I have cleared 300-370 i used 65q file. I used premdev dumps

Hi milid,
could you please share the premdev dumps please?
Thanks

Hello milid – where can we get the premdev? Sitting for exam in a week. Thank you for any help

Hy Guy where I can buy a official studi guide for 300-370?
Anyone can share a valid dump ?

Can anyone share a valid dump ?
giowireless2017 at g m a i l .c o m

@Daniel Lyon

Thanks, all helpful comments!!!

Hello
Has anyone recently done the CCNA Wireless 200-355?
If so, would you have the right vce to share?
Thank you

I took the 300-370 exam last week. I passed but not a lot of material from dumps is on there. The test has changed a lot. Passleader answers are completely wrong but it helps for you to read those questions and research to understand them without memorizing. That’s what I did. I made it at just the passing score. I had a drag and drop PoE question, 2 about hex, a beacon packet capture, one about etherchannel, about 15 questions were from the David file previously posted (thank you David) – I had 57 total questions. If you have a cisco login, they have some free training material there. You should read. It’s kind of boring, but I couldn’t believe how much it helped. I have one test left for ccnp wireless. Thank you all for the info on this site, I hope my info will help you.

I Jerry can you share some material ?
thanks
giowireless2017 at g m a i l .c o m

(21/July/2017 Updated) New 300-375 Exam Questions:

NEW QUESTION 61
Which attribute on the Cisco WLC v7.0 does RADIUS IETF attribute “Tunnel-Private-Group ID” assign?

A. ACL
B. DSCP
C. QoS
D. VLAN

Answer: D

NEW QUESTION 62
Which three WLAN polices can be controlled by using the Cisco IBNS on the Cisco WLC and Cisco Secure ACS? (Choose three.)

A. QoS setting
B. VLAN
C. EAP type
D. ACL
E. authentication priority order
F. NAC state

Answer: ABD

NEW QUESTION 63
An engineer is securing the wireless network from vulnerabilities. Which four strategies are recommended for mitigation? (Choose four.)

A. MFP
B. identity-based networking
C. rogue location
D. EAP-TLS
E. guest monitoring
F. RF profiles
G. rogue detection
H. password policies

Answer: ACEG

NEW QUESTION 64
Refer to the exhibit. A client reports being unable to log into the wireless network, which uses PEAPv2. Which two issues appear in the output? (Choose two.)
……

A. There is a problem with the client supplicant.
B. The AP has the incorrect RADIUS server address.
C. The AP has lost IP connectivity to the authentication server.
D. The EAP client timeout value should be increased.
E. The authentication server is misconfigured on the controller.
F. The authentication server is misconfigured in the WLAN.

Answer: AD

NEW QUESTION 65
When using the Standalone Profile Editor in the Cisco AnyConnect v3.0 to create a new NAM profile, which two statements describe the profile becoming active? (Choose two.)

A. Selects the new profile from NAM
B. Selects “Network Repair” from NAM
C. Becomes active after a save of the profile name
D. Ensures use of “configuration.xml” as the profile name
E. Ensures use of “config.xml” as the profile name
F. Ensures use of “nam.xml” as the profile name

Answer: BD

NEW QUESTION 66
Which feature should an engineer select to implement the use of VLAN tagging, QoS, and ACLs to clients based on RADIUS attributes?

A. per-WLAN RADIUS source support
B. client profiling
C. AAA override
D. captive bypassing
E. identity-based networking

Answer: C

NEW QUESTION 67
How should the Cisco Secure ACS v4.2 and the Cisco WLC v7.0 be configured to support wireless client authentication?

A. The WLC configured for RADIUS and the Cisco Secure ACS configured for RADIUS (Cisco Airespace)
B. The WLC configured for RADIUS and the Cisco Secure ACS configured for RADIUS (IETF)
C. The WLC configured for TACACS+ and the Cisco Secure ACS configured for TACACS+ (Cisco Airespace)
D. The WLC configured for TACACS+ and the Cisco Secure ACS configured for TACACS+ (Cisco IOS)

Answer: A

NEW QUESTION 68
Clients are failing EAP authentication. A debug shows that an EAPOL start is sent and the clients are then de-authenticated. Which two issues can cause this problem? (Choose two.)

A. The WLC certificate has changed.
B. The WLAN is not configured for the correct EAP supplicant type.
C. The shared secret of the WLC and RADIUS server do not match.
D. The WLC has not been added to the RADIUS server as a client.
E. The clients are configured for machine authentication, but the RADIUS server is configured for user authentication.

Answer: CD

NEW QUESTION 69
……

Get The Newest 300-375 Dumps In PDF And VCE From — https://www.passleader.com/300-375.html (77q VCE and PDF)

Good Luck!

Cisco WLC v7.0 is configured on 2.4 GHz for mandatory data rates of 9 and 18 Mb/s. Data
rates of 6, 12, 24, 36, 48, and 54 Mb/s are configured as supported. All other data rates are
disabled. Which three results can be determined from this configuration? (Choose three.)
A. 802.11b/g/n clients are able to connect.
B. 802.11a/n clients are able to connect.
C. Clients must be able to receive packets at 18 Mb/s.
D. Clients must be able to receive packets at 9 Mb/s.
E. Broadcast and multicast packets are sent at 18 Mb/s.
F. Broadcast packets are sent at 9 Mb/s, while multicast packets are sent at 18 Mb/s.
G. Broadcast packets are sent at 18 Mb/s, while multicast packets are sent at 9 Mb/s.
Answer: ADF
QUESTION 2
Which Cisco WLC debug command would allow you to determine if the certificate process
is failing in the CAPWAP messages?
A. debug capwap events enable
B. debug capwap packet enable
C. debug capwap errors enable
D. debug cert events enable
E. debug pm pki enable
Answer: E
QUESTION 3
Which method is used by Cisco WLC v7.0 for the autoinstall process?
A. CAPWAP discovery broadcast
B. IP address stored in NVRAM
C. DNS “cisco-capwap-controller”
D. DHCP option 150
E. DHCP option 43
F. DHCP option 60
Answer: D
QUESTION 4
Cisco WCS v7.0 using a Cisco 3300 Series MSE can map and track wireless clients but is
unable to track RSSI-based RFID tags. What is the most likely cause of this problem?
A. Tags are multicasting and not associating.
B. Tags are not compatible with Cisco Compatible Extensions.
C. The Cisco WLC RFID timeout needs a configuration change.
D. The Cisco WLC RFID tracking needs to be enabled.
E. License is not installed on Cisco MSE.
F. NMSP is incorrectly configured between Cisco WCS and Cisco MSE.
Answer: B
QUESTION 5
When planning on implementing Enhanced Local Mode scanning, tracking RF interference
devices (CleanAir), RFID tags that are based on TDoA, and wireless clients, what is needed
for the Cisco 3300 Series MSE v7.0?
A. wIPS license, context-aware license, CleanAir license, and Cisco RFID tag license only
B. wIPS license, context-aware license, CleanAir license, and partner tag engine license only
C. wIPS license, context-aware license, and Cisco RFID tag license only
D. wIPS license, context-aware license, and partner tag engine license only
E. context-aware license and Cisco RFID tag license only
F. context-aware license and partner tag engine license only
Answer: D
Get vce and pdf or more qa in http://www.dump4exam.com/642-747.html

Hi Guy this is my doc from passleader-examkiller and wirelesstut comments.
https://1drv.ms/w/s!AnNIEHjGfAc-jm8sfr2YcgvVVAgJ
Comments are appreciated

Hi!

Congratulations!!

Just passed the 300-370 test few hours ago, scored 9xx/1000!!!

There were many new questions in my actual 300-370 test, the following are part of new Qs from my test:

1. Which Cisco WLC debug command would allow you to determine if the certificate process is failing in the CAPWAP messages?

2. Where is the CAS license installed?

3. Debug missing RFID.

4. When RTLS is used?

5. What is WCS report used to check worst SNR in mesh link?

6. What are the operations have most affect on MSE and WCS cpu?

……etc.

The old version 300-370 dumps now are NOT VALID enough for passing, I learned almost all new questions from PassLeader, the PassLeader ADMIN sent the new questions to me, haha~~~

Recommend to get the newest PassLeader 300-370 dumps for passing!!!

http://www.ciscobraindump.com/?s=300-370

Good Luck!!!

@HDgio

Have you taken the exam or are you still studying?

Open Link
https://1drv.ms/w/s!AqDA6xjtu94KhWY99UuruAJLAWNL

We have All Dumps on this site

CCNA , CCNA Security , CCDP , CCDA , CCNP , CCIE

CCNA & CCNP Wireless 100% Valid Dumps Available Here PDF + VCE Both Files

Open Link
https://1drv.ms/w/s!AqDA6xjtu94KhWY99UuruAJLAWNL

Hy Hue_BR I have fail my exam in August and hope retry
The new passleader is fake

Hi HDgio,

Can you remember the new questions? If you need, I have some new question of 300-360.

Regards

Hello,

i look also for the new question – i want taken the 300-370 test asap.

PassLeader 300-370 dumps now have 115q, anyone who can share the NEWEST PassLeader 300-370 dumps???

Thanks in advance!!!

Congrats!!!

Good luck, all!!!

P.S.

Part of new PassLeader 300-375 dumps FYI:

http://www.ciscobraindump.com/?s=300-375

(77q~~~New Version Dumps!)

Good Luck!!!

P.S.

Part of new PassLeader 300-360 dumps FYI:

http://www.ciscobraindump.com/?s=300-360

(94q~~~New Version Dumps!)

Good Luck!!!

P.S.

Part of new PassLeader 300-365 dumps FYI:

http://www.ciscobraindump.com/?s=300-365

(71q~~~New Version Dumps!)

Good Luck!!!

Thanks for sharing the latest 300-370 dumps!!!

I also passed the 300-370 last week (3/Nov/2017)!!!

Yes, old version 60q dumps are not valid now.

I used the newest PassLeader 300-370 dumps (115q VERSION now), which is the most valid 300-370 dumps now!!!
Part of 300-370 dumps FYI:

http://www.ciscobraindump.com/?s=300-370

Good Luck!!!

NEXT FOR MY 300-375 EXAM!!!

Hi, all! The valid 300-360 dumps now are available, here are part of new 300-360 exam questions from new 300-360 dumps FYI:

NEW QUESTION 115
You are planning the coverage for wireless VoIP by using Ekahau. Which signal strength does Ekahau recommend using for VoIP?

A. -84 dBm
B. -76 dBm
C. -67 dBm
D. -53 dBm

Answer: C
Explanation:
Each vendor has their own recommended signal strength for a given data rate or application. For instance, one vendor may recommend designing their VoIP solution at -67 dBm (perhaps the most widely-used value for VoIP deployment if I had to choose one), while another may say -70 dBm. In most cases the values will differ only by a couple dB.

NEW QUESTION 116
A wireless engineer is hired to design a network for six buildings with a WLC in each building to support the access points. Which type of wireless architecture is being used?

A. distributed deployment
B. autonomous deployment
C. unified deployment
D. centralized deployment

Answer: B

NEW QUESTION 117
You must upgrade a data-based wireless network to support Voice over Wireless. Which RSSI measurement do you use to redesign the wireless network?

A. -65 dBm
B. -72 dBm
C. -75 dBm
D. -67 dBm

Answer: D

NEW QUESTION 118
A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?

A. 802.11r
B. 802.11w
C. 802.11i
D. 802.11k

Answer: D
Explanation:
You can optimize roaming for non-802.11k clients by generating a prediction neighbor list for each client without sending an 802.11k neighbor list request. When prediction based roaming enables a WLAN, after each successful client association/re-association, the same neighbor list optimization applies on the non-802.11k client to generate and store the neighbor list in the mobile station software data structure. Clients at different locations have different lists because the client probes are seen with different RSSI values by the different neighbors as the clients usually probe before any association or re-association. This list is created with the most updated probe data and predicts the next AP that the client is likely to roam to.

NEW QUESTION 119
Which option is an advantage at using Cisco CleanAir technology in your wireless network?

A. CleanAir can be used on an AP in monitor mode so that the AP serves client traffic and monitors for interference simultaneously.
B. A single CleanAir AP can be used to analyze RF traffic from many Aps.
C. CleanAir is a software feature that can be added to arty AP to start monitoring interference and air quality.
D. CleanAir operates 24/7 and constantly monitors for interference and air quality issues.

Answer: D
Explanation:
An advantage of CleanAir technology is that it operates 24/7, constantly monitoring for interference and air quality issues. This allows IT to take a more proactive approach to spectrum management. Instead of waiting for interference to be reported by an end user (in the form of a trouble ticket) and then dispatching a tool to analyze the problem, IT can find interference as soon as it occurs and take immediate action. Having a 24/7 history also makes it possible to look back in time. Using historical data, it’s easy to perform analyses of trends over time.

NEW QUESTION 120
You are designing a wireless network to support high user density in the 5 GHz spectrum. Which option is the benefit of selecting a channel width of 20 MHz instead of selecting a higher channel width?

A. increased bandwidth
B. increased throughput
C. decreased co-channel interference
D. decreased speed

Answer: C
Explanation:
If forced to reuse 5 GHz channels, more consistent results will be delivered using strictly 20 MHz channels and avoiding loss of efficiency due to CCI.

NEW QUESTION 121
……

The new 300-360 dumps (Dec/2017 Updated) now are available, here are MORE 300-360 exam questions (FYI):

Good Luck!!!

2018 latest CCIE Dumps
freeciscodumps dot com
rs-ccie.php

latest dumps ccnp
http://www.dumpspro.com/ccnp-dumps

Hi
where I can buy a new study guide for 300-370 ?
Thanks in advance

The latest CCNP dumps collection (300-360/300-365/300-370/300-375):

https://docs.google.com/spreadsheets/d/1Yx4MUGmaLRn-UtgVVlfEdrpnM9d0RK02xJwjPmi-jCw/

Good luck!

if you want to make strong your prepration of 642-747 exam you must get valid dumps with latest question answers, i will consult you pass4sure you can get from https://www.pass4surekey.com/exam/642-747.html

Real CCNP Exam Questions
Easy Pass
stumbleupon.com/su/1xowyV

LATEST EXAM LEARNING PACK DOWNLOAD HERE:
LATETS DUMPS + PDF GUIDE BOOK + CBT NUGGETS VIDEOS

CCNA WIRELESS 200-355 —- 457 Q&As + GUIDE BOOK + VIDEOS
WIDESIGN 300-360 — 147 Q&As
WIDEPLOY 300-365 —- 61 Q&As
WITSHOOT 300-370 —- 60 Q&As
WISECURE 300-375 —- 70 Q&As
 CCIE WIR 400-351 —- 270 Q&As

INSTANT DOWNLOAD after 20 bucks contribution:
https://docs.google.com/document/d/1Z5JS0GaRZmK7Q2__Spp0jRR1jqUUPpLgJ8A2GnUfSIU/edit?usp=sharing

Everyone mention about Passleader 171q for 300-360
71 Q for 300-365
115 Q for 300-370 and
77 Q for 300-375
But noone shares this dumps
This is a sharing community and dumps are not for passing the exam, instead useful for preparing the exam.
You even don’t discuss about the questions

GREAT!

Thanks in advance, all!!!

passed the exam with 164 qs following the dumps:

https://examclubs.com/cisco-642-747-dumps

NEW QUESTION 115
You are planning the coverage for wireless VoIP by using Ekahau. Which signal strength does Ekahau recommend using for VoIP?

A. -84 dBm
B. -76 dBm
C. -67 dBm
D. -53 dBm

Answer: C
Explanation:
Each vendor has their own recommended signal strength for a given data rate or application. For instance, one vendor may recommend designing their VoIP solution at -67 dBm (perhaps the most widely-used value for VoIP deployment if I had to choose one), while another may say -70 dBm. In most cases the values will differ only by a couple dB.

NEW QUESTION 116
A wireless engineer is hired to design a network for six buildings with a WLC in each building to support the access points. Which type of wireless architecture is being used?

A. distributed deployment
B. autonomous deployment
C. unified deployment
D. centralized deployment

Answer: B

NEW QUESTION 117
You must upgrade a data-based wireless network to support Voice over Wireless. Which RSSI measurement do you use to redesign the wireless network?

A. -65 dBm
B. -72 dBm
C. -75 dBm
D. -67 dBm

Answer: D

NEW QUESTION 118
A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?

A. 802.11r
B. 802.11w
C. 802.11i
D. 802.11k

Answer: D
Explanation:
You can optimize roaming for non-802.11k clients by generating a prediction neighbor list for each client without sending an 802.11k neighbor list request. When prediction based roaming enables a WLAN, after each successful client association/re-association, the same neighbor list optimization applies on the non-802.11k client to generate and store the neighbor list in the mobile station software data structure. Clients at different locations have different lists because the client probes are seen with different RSSI values by the different neighbors as the clients usually probe before any association or re-association. This list is created with the most updated probe data and predicts the next AP that the client is likely to roam to.

NEW QUESTION 119
Which option is an advantage at using Cisco CleanAir technology in your wireless network?

A. CleanAir can be used on an AP in monitor mode so that the AP serves client traffic and monitors for interference simultaneously.
B. A single CleanAiwdr AP can be used to analyze RF traffic from many Aps.
C. CleanAir is a software feature that can be added to arty AP to start monitoring interference and air quality.
D. CleanAir operates 24/7 and constantly monitors for interference and air quality issues.

Answer: D

Done my test

https://drive.google.com/open?id=11nKOBeg6yIR0ryqwHiR07Zo-8m2bG1k4

All questions was from dumps no need to learn more

My Marks: 9xx/1000

ATTENTION!

The new PassLeader 300-360 dumps (Mar/2019 Updated) now are available:

208q NEW VERSION!!!

Get more PassLeader 300-360 dumps here:

drive.google.com/open?id=0B-ob6L_QjGLpWVVreDl3bGRhakk

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Get new dumps from the reliable source.
https://www.certsengine.com/300-365-practice-questions.html

Hello, all!

1. Part of PassLeader 300-370 dumps FYI:

drive.google.com/drive/folders/0B-ob6L_QjGLpM3ZXaF9TdmZSeUU

2. Part of PassLeader 300-375 dumps FYI:

drive.google.com/drive/folders/0B-ob6L_QjGLpQ2hZQ0c4c2d1QjA

Good luck!

[(copy those links and open them in your web browser!!!)]

What’s more:

1. Part of PassLeader 300-360 dumps FYI:

drive.google.com/drive/folders/0B-ob6L_QjGLpWVVreDl3bGRhakk

2. Part of PassLeader 300-365 dumps FYI:

drive.google.com/drive/folders/0B-ob6L_QjGLpR3dFYkJubjFZaDQ

Good luck!

[(copy those links and open them in your web browser!!!)]

Hello Guys,
share Latest Exam questions
passhot dot com

NEW QUESTION 62
Which three WLAN polices can be controlled by using the Cisco IBNS on the Cisco WLC and Cisco Secure ACS? (Choose three.)

A. QoS setting
B. VLAN
C. EAP type
D. ACL
E. authentication priority order
F. NAC state

Answer: ABD

NEW QUESTION 63
An engineer is securing the wireless network from vulnerabilities. Which four strategies are recommended for mitigation? (Choose four.)

A. MFP
B. identity-based networking
C. rogue location
D. EAP-TLS
E. guest monitoring
F. RF profiles
G. rogue detection
H. password policies

Answer: ACEG

NEW QUESTION 64
Refer to the exhibit. A client reports being unable to log into the wireless network, which uses PEAPv2. Which two issues appear in the output? (Choose two.)
……

A. There is a problem with the client supplicant.
B. The AP has the incorrect RADIUS server address.
C. The AP has lost IP connectivity to the authentication server.
D. The EAP client timeout value should be increased.
E. The authentication server is misconfigured on the controller.
F. The authentication server is misconfigured in the WLAN.

Answer: AD

NEW QUESTION 65
When using the Standalone Profile Editor in the Cisco AnyConnect v3.0 to create a new NAM profile, which two statements describe the profile becoming active? (Choose two.)

A. Selects the new profile from NAM
B. Selects “Network Repair” from NAM
C. Becomes active after a save of the profile name
D. Ensures use of “configuration.xml” as the profile name
E. Ensures use of “config.xml” as the profile name
F. Ensures use of “nam.xml” as the profile name

Answer: BD

NEW QUESTION 66
Which feature should an engineer select to implement the use of VLAN tagging, QoS, and ACLs to clients based on RADIUS attributes?

A. per-WLAN RADIUS source support
B. client profiling
C. AAA override
D. captive bypassing
E. identity-based networking

Answer: C

NEW QUESTION 67
How should the Cisco Secure ACS v4.2 and the Cisco WLC v7.0 be configured to support wireless client authentication?

A. The WLC configured for RADIUS and the Cisco Secure ACS configured for RADIUS (Cisco Airespace)
B. The WLC configured for RADIUS and the Cisco Secure ACS configured for RADIUS (IETF)
C. The WLC configured for TACACS+ and the Cisco Secure ACS configured for TACACS+ (Cisco Airespace)
D. The WLC configured for TACACS+ and the Cisco Secure ACS configured for TACACS+ (Cisco IOS)

Answer: A

NEW QUESTION 68
Clients are failing EAP authentication. A debug shows that an EAPOL start is sent and the clients are then de-authenticated. Which two issues can cause this problem? (Choose two.)

A. The WLC certificate has changed.
B. The WLAN is not configured for the correct EAP supplicant type.
C. The shared secret of the WLC and RADIUS server do not match.
D. The WLC has not been added to the RADIUS server as a client.
E. The clients are configured for machine authentication, but the RADIUS server is configured for user authentication.

Answer: CD

NEW QUESTION 69
……

Get The Newest 300-375 Dumps In PDF And VCE From — https://www.passleader.com/300-375.html (77q VCE and PDF)

Good Luck!

ak001 August 3rd, 2017
Cisco WLC v7.0 is configured on 2.4 GHz for mandatory data rates of 9 and 18 Mb/s. Data
rates of 6, 12, 24, 36, 48, and 54 Mb/s are configured as supported. All other data rates are
disabled. Which three results can be determined from this configuration? (Choose three.)
A. 802.11b/g/n clients are able to connect.
B. 802.11a/n clients are able to connect.
C. Clients must be able to receive packets at 18 Mb/s.
D. Clients must be able to receive packets at 9 Mb/s.
E. Broadcast and multicast packets are sent at 18 Mb/s.
F. Broadcast packets are sent at 9 Mb/s, while multicast packets are sent at 18 Mb/s.
G. Broadcast packets are sent at 18 Mb/s, while multicast packets are sent at 9 Mb/s.
Answer: ADF
QUESTION 2
Which Cisco WLC debug command would allow you to determine if the certificate process
is failing in the CAPWAP messages?
A. debug capwap events enable
B. debug capwap packet enable
C. debug capwap errors enable
D. debug cert events enable
E. debug pm pki enable
Answer: E

Done my test..

All questions was from dumps no need to learn more

My Marks: 9xx/1000

Without 2 stars**
https:/*/s.i*d/5cA-z

NEW QUESTION 67
How should the Cisco Secure ACS v4.2 and the Cisco WLC v7.0 be configured to support wireless client authentication?

A. The WLC configured for RADIUS and the Cisco Secure ACS configured for RADIUS (Cisco Airespace)
B. The WLC configured for RADIUS and the Cisco Secure ACS configured for RADIUS (IETF)
C. The WLC configured for TACACS+ and the Cisco Secure ACS configured for TACACS+ (Cisco Airespace)
D. The WLC configured for TACACS+ and the Cisco Secure ACS configured for TACACS+ (Cisco IOS)

Answer: A

NEW QUESTION 68
Clients are failing EAP authentication. A debug shows that an EAPOL start is sent and the clients are then de-authenticated. Which two issues can cause this problem? (Choose two.)

A. The WLC certificate has changed.
B. The WLAN is not configured for the correct EAP supplicant type.
C. The shared secret of the WLC and RADIUS server do not match.
D. The WLC has not been added to the RADIUS server as a client.
E. The clients are configured for machine authentication, but the RADIUS server is configured for user authentication.

Answer: CD

Hello guys, share latest exam questions Good luck, all!
Look My Name